Extremely nice work. Very clean looking results. Great video. That said, it obviously took a lot of man hours, materials, and money to build this machine. But in the end, other than being larger framed, what does this rig offer or do that the quad didn't already do before you reconstructed it? Still has the same quad engine, the same gas tank and seat, the same tires, and carries one person. It likely doesn't run faster or perform any better than the original quad. So why go to all the trouble to build this machine? I'd just as soon have the original quad. And, if I wanted a larger quad, then I could have sold the old one and put all the money invested in the reconstruction toward a new, larger ATV.
With all the skilled fabrication you did, im really surprised you didn't make it double wishbone front suspension, the single wishbone with fixed hub suffers from track toe-in when the suspension is compressed.
Şase güzel hersey iyi fakat arka süspansiyon sistemini zincirden bağımsız yaparsanız daha sağlıklı olur sizde hoşgorursunuzki arka süspansiyon yaptığı zaman zincirde gevşeme veya fazla germek yapıyordur şuanda veya süspansiyonu engelliyordur bunları göz önünde bulundurursaniz daha verimli olacaktır motoru arka bağımsız şase üzerine koyarsanız daha iyi olabilir elinize sağlık saygılar 👍
Я понимаю, что эффекты света от дуги во время сварки вам не нравятся. У каждого свои предпочтения в отношении контента и стиля монтажа. Я принимаю к сведению ваш комментарий и учту ваше мнение при создании будущих видео. Я постараюсь улучшить визуальное качество своей сварки и минимизировать отвлекающие моменты, связанные с эффектами света. Спасибо за ваш конструктивный отзыв и за ваш интерес к моему UA-cam-каналу.
Español Me gustaría que me enviaras un video de como hacerlo y conectado en cámara lenta me gustó este video solo tengo la duda de los frenos no ví dónde los puso gracias por su atención desde Colombia 🇨🇴 English I would like you to send me a video of how to do it and connected in slow motion I liked this video I only have the doubt about the brakes I did not see where they put them thanks for your attention is from colombia🇨🇴
Are thrown into the bin along with any round tubing or thoughts of bending said round... I learned everything I know about proper rear suspension/steering geometry along with metal fabrication bending and welding from this platform.. my tools are just a simple if not simpler yet my homemade quad and all other 4 wheeled builds turn when I turn the wheels not because of a differential or access to better parts but because of proper Caster, camber, sai, Ackerman, scrub radius for a given wheel base, width, and weight distribution. Also, my projects that include rear suspension do not have chain tension issues (not because of any jackshaft or complex chain tensioner but simple geometry) nor do they try to lift or bury the tire under acceleration or braking.. if you want a real exaggerated example of how proper steering geometry can really make a difference look into how (well built) racing mowers turn very well with live rear axles and most of the weight on the rear.. even racing go karts are very heavily rear bias yet they can turn on a dime. It is because on a well built cart the inside front tire will dig in. this works with suspension too look at how quads are made with lots of caster, 0 camber for straight line stability but when turned the sai and caster along with Ackerman and usually excessive scrub radius all act together to push the inside tire into the ground and camber the wheels in a way that gives the front wheels leverage over the rear axles... My face is now blue 🤣
Побольше таких видио ну атак мое к тебе уважение уважаю таких людей.
Very good 👌
Love from India 🇮🇳💯🙏🏿🔥
Beautifu work 🧑🔧✅👌👍
Hollou, Krasava!! Rossia Kineshma 🖐️🖐️🖐️🖐️👍👍👍
Вполне достойно!! Автор респект ))
This year I must try to build one of these bikes🤞🤞🤞
Ну что, родил?
You are really creative. I wish I could make a motorcycle like her. You are really creative🌷🇩🇿
Thanks
А можно черчежи
На жёлтый квадрик
Приветствую. Молодец, класс!!!! Просто супер!!!!
и не нужен автопром никакой) кредиты тоже , смастерил сам и езди
Amei seu projeto 🤩
Hola saludos excelente trabajo saludos desde Venezuela 🇻🇪🤗
fantastic beautiful work
Wow good job very nice😮😮
Thank you MrNepalikanxo! I'm glad you enjoyed the video and appreciate your support.
@@CHERALAUTO thankyou
how much is that, can you teach me
Very nice...👍👍
Extremely nice work. Very clean looking results. Great video. That said, it obviously took a lot of man hours, materials, and money to build this machine. But in the end, other than being larger framed, what does this rig offer or do that the quad didn't already do before you reconstructed it? Still has the same quad engine, the same gas tank and seat, the same tires, and carries one person. It likely doesn't run faster or perform any better than the original quad. So why go to all the trouble to build this machine? I'd just as soon have the original quad. And, if I wanted a larger quad, then I could have sold the old one and put all the money invested in the reconstruction toward a new, larger ATV.
Nice
You have a gift man big props
PERFORMANCE IS SUPERB
With all the skilled fabrication you did, im really surprised you didn't make it double wishbone front suspension, the single wishbone with fixed hub suffers from track toe-in when the suspension is compressed.
Şase güzel hersey iyi fakat arka süspansiyon sistemini zincirden bağımsız yaparsanız daha sağlıklı olur sizde hoşgorursunuzki arka süspansiyon yaptığı zaman zincirde gevşeme veya fazla germek yapıyordur şuanda veya süspansiyonu engelliyordur bunları göz önünde bulundurursaniz daha verimli olacaktır motoru arka bağımsız şase üzerine koyarsanız daha iyi olabilir elinize sağlık saygılar 👍
Una pregunta y que pasaría si lo hace tracción delantera??
👍🏻thank you shering
It's amazing!! Excelent
Hellos i am ram and i loves your video and i subscribe your channel and make a simple atv bike and keep it up
Love it as always very sweet so cool thanks Lee
Надо было предупреждать что нужно надевать защитные очки перед просмотром
Я понимаю, что эффекты света от дуги во время сварки вам не нравятся. У каждого свои предпочтения в отношении контента и стиля монтажа. Я принимаю к сведению ваш комментарий и учту ваше мнение при создании будущих видео. Я постараюсь улучшить визуальное качество своей сварки и минимизировать отвлекающие моменты, связанные с эффектами света. Спасибо за ваш конструктивный отзыв и за ваш интерес к моему UA-cam-каналу.
Very good project for homemade... Can you make a electric quad with 3000 walt motor
No words, just amazing!
Gostei muito top parabéns pela ideia
I liked it a lot, congratulations só queria que ele entendesse oque vc falou MN Tmj
Full safe .no police tention 😀
Уважение❤🎉
Good vdo 👍 my friend ❤️
9:52 "FINAL GATES TO OPEN"
nice❤💕💕💕💕💕
Hola te salió épico ¿después podés hacer una motocross?
Can u plz tell me the measurements of the rods u have taken for the chassis bild 😅
Hello! Im asking for your kindness to share all the measurements for the body frame 😊 im really interested to build this quad bike.
Двигатель слаб и рама очень слаба
@@zjlou_zadpot6765 от урала раму с движкой нужно
.:
@@zjlou_zadpot6765 согл
@@zjlou_zadpot6765Так видео и называется, облегчённая версия.
Mantap sekli
Very good nice bro masahallah 🌹🇵🇰🇵🇰🌹❤️👍🌍👏
Wow man 😍😍
Hello!Im asking for your kindness to share all the measurements for the body frame 🐱 im really interested to build this quad Nike😀😀😀
Motor capacity please 🙏 ,Good work
Respect 👍
7:30 не развалился корпус двигателя от такого крепления?
Wow, it looks creative and amazing.
great work
Adorei o projeto. Vc venderia o projeto pra mim?
Gostei !!! Mais o vídeo foi tão rápido que não dá nem pra cópia o projeto
By size sir
I guess you would have used differential for rear wheel. The wheels will skid during the turn .
Оштл
Bạn mua Bánh xe này ở đâu vậy, giá bao nhiêu vậy
Eres un genio.
For by palm .the garden...amazing..
So beatiful
Nice video sir .sir can you share me the measurements of the bike to me too 🙏
WOW! 😀
Español
Me gustaría que me enviaras un video de como hacerlo y conectado en cámara lenta me gustó este video solo tengo la duda de los frenos no ví dónde los puso gracias por su atención desde Colombia 🇨🇴
English I would like you to send me a video of how to do it and connected in slow motion I liked this video I only have the doubt about the brakes I did not see where they put them thanks for your attention is from colombia🇨🇴
Mantap...salam dari pemula🙏🙏
Cuales son las medidas, me las puedes compartir? para chasis
انتم عباقره👍🏼✅😍
Здравствуйте а у вас есть чертежи на сборку такого квадроцикла
не стоит это собирать, он развалится на второй день
Quando gastou para fazer este projeto?
Aap kaha se ho kitana kharcha aata hai Bhai 😁🤗
Interesante pero en español saludos
❤0m
❤❤
Still after all these projects, any thoughts of proper steering or swingarm / chain drive geometry
Are thrown into the bin along with any round tubing or thoughts of bending said round... I learned everything I know about proper rear suspension/steering geometry along with metal fabrication bending and welding from this platform.. my tools are just a simple if not simpler yet my homemade quad and all other 4 wheeled builds turn when I turn the wheels not because of a differential or access to better parts but because of proper Caster, camber, sai, Ackerman, scrub radius for a given wheel base, width, and weight distribution. Also, my projects that include rear suspension do not have chain tension issues (not because of any jackshaft or complex chain tensioner but simple geometry) nor do they try to lift or bury the tire under acceleration or braking.. if you want a real exaggerated example of how proper steering geometry can really make a difference look into how (well built) racing mowers turn very well with live rear axles and most of the weight on the rear.. even racing go karts are very heavily rear bias yet they can turn on a dime. It is because on a well built cart the inside front tire will dig in. this works with suspension too look at how quads are made with lots of caster, 0 camber for straight line stability but when turned the sai and caster along with Ackerman and usually excessive scrub radius all act together to push the inside tire into the ground and camber the wheels in a way that gives the front wheels leverage over the rear axles... My face is now blue 🤣
A todo terreno...
❤❤❤
Muito bom gosta de ter o gabarito com as medidas
its good ..foot step pijakan kaki mengganggu starter pedAL...harusnya kaki didepan pijakan harley davidson...
Salute...to ubbb
Super mast engineering
🔥🔥💥💯🧑🔧
Это какие колеса? Что за размер?
😁👍💯
body rangka juga terlalu kotak ..tapi sangat bagus..
Impressive
Te quedó chingona
What are the dimensions, can you share? for the chassis
Amazing
Hola que tal pudieras pasar las pulgadas del tubo y qe cc es el motor
Как называется эта штука на 00:34 минуте ? Каторая держет калëса
कितने रुपये खर्च हुए? बजेट कितना लगता है ?
Please send
Legal 👍
Can I work with you sir, I am very interesting in machine, making motorcycle
Tyre sizes
22x10-8
😃👍👍👍👍 а где размеры можно найти
....шестикрылый пятих.... Изобретение - "власипеда".
na minha cabeça eu consigo fazer tbm
А за кадром стоит заводской квадрик😂
bro front wheel assemby ah vehicle dhi
Super la conception, serait t il possible d'avoir le plan de construction merci
Parabens
Есть размеры рамы?
Брат Салам из Казахстана. Сможешь мне скинуть размеры металла в длину и ширину.
Nice
Прокосынить бы ещё для уверенности
Do you sell also?
What size engine did you use?
Muy vuen diseño
Excelente
👍👍👍