I learnt we can blow stuff up. Thanks for sharing. On the bike paths in Australia it’s possible to get another kind of snakebite if you don’t look where you are going.
1-F (putting all your weight as explained in the method automatically adjust the method itself for your weight) It works only in tubeless setup 2-F 3- a test to see if you might have "snake bite" tipe of puncture during your ride
I like the fact all your videos are to the point and extremely informative, whatever I know about bikes is because of you and your videos,keep up the grind💪
Thanks for the free bike service lesson school, bro. I learned a lot about bike maintenance and buying decisions from your videos. People like you are the reason I s topped using adblockers on UA-cam.
I actually didn't know that on the minipumps there are like pieces that you can change from shräder and presta, that is actually something that I learnt today, have a nice day 😁
1: F (it depends on the interpretation) If you do this method on your bike, it will work. But keep in mind that he uses 2.4 tires and a tubeless setup. 2: F 3: Put your weight on the tire when on the edge of a curb. If the air pressure is too low, it can cause a snakebite.
1. F 2. T 3. Curb test is when u roll over the tire on a protusion like a curb, so u can see if the curb touches the rim. It will determine if the tires have too low of a pressure, in which snakebite punctures will occur.
1. F 2. F 3. Test to check tyres are inflated correctly, by ensuring the rim doesn't touch the ground. Which, cause "snake bite punctures' and too much rolling resistance.
I have a question. There is a slight squeak coming from the back of my bike. Any ideas on what it could be. I took out the break pads and cleaned the disc, but it didn't help to much.
1. F 2. F 3. Pushing the Tire onto a piece of wood (or similar) with your body weight to see wether there is sufficient air in the tire to prevent a snake bite. Rim Touching the Curb/Stick/whatever -> too little pressure
1. T 2. F 3. To see if the rims will depress low enough to hit a curb/object, whichcan be caused by low air pressure in the tyre/tube and worse can result to snake bite (flat tyre) onthe tube. If fail, must increase the air pressure.
1. F 2. F 3. The curb(kerb) test is done to against the edge of a curb or shar angled surface. This is to test whether the tire pressure is good. If too low the rim and the curb come in to contact causing a snake bite puncture.
1. F 2. F 3. Use an object to simulate the tyre going over a curb. Then put your body weight over that tyre when on this object(curb) and see if it goes down enough to cause a snake bite / pinch flat.
Num 1. F Num 2. F Num 3. The kerb test is a method to determine if the tire pressure is adapted to the effect of a small pressure point and the weight applied to it, independently of tire type.
Hi. Answers: 1. False, 2. False, 3. Curb test is when pressing tire against an edge of curb if tire compresses enough to be compressed between rim and curb pressure is too low and snake bite puncture can happen.
1. F. Nino Schurter thumb pressure test works for his body weight only - pressure check is based on tire width and tubeless not rider weight 2. F. lowering pressure always lowers rolling resistance - if pressure is too high lowering it will reduce rolling resistance. If starting a correct pressure lowering it will increase rolling resistance 3. Kerb/Curb test is when pressing tire against edge of kerb/curb if tire deforms enough to be compressed between rim and kerb/curb pressure is too low and pinch/snake bite puncture can occur
False True The Curb test can help you how likely the event of a snakebite occurs for your current tire pressure and weight. With that information you can tell whether your tire pressure is high enough or not.
1. False 2. False 3. The curb test is performed by pressing the wheel against a curb or other sharp angle such as a 2x4. If the rim of the wheel touches the “curb” the tire pressure is too low and may result in a snakebite puncture.
I learnt we can blow stuff up. Thanks for sharing. On the bike paths in Australia it’s possible to get another kind of snakebite if you don’t look where you are going.
Hahaha 🤣
Crikey! 🐍
1-F (putting all your weight as explained in the method automatically adjust the method itself for your weight) It works only in tubeless setup
2-F
3- a test to see if you might have "snake bite" tipe of puncture during your ride
I like the fact all your videos are to the point and extremely informative, whatever I know about bikes is because of you and your videos,keep up the grind💪
Thanks for the free bike service lesson school, bro. I learned a lot about bike maintenance and buying decisions from your videos.
People like you are the reason I s topped using adblockers on UA-cam.
Already watched like 1000hrs on bike videos so I know some basic stuff, but watching you do some of the tests is just..nice to see.
I actually didn't know that on the minipumps there are like pieces that you can change from shräder and presta, that is actually something that I learnt today, have a nice day 😁
1: F (it depends on the interpretation) If you do this method on your bike, it will work. But keep in mind that he uses 2.4 tires and a tubeless setup.
2: F
3: Put your weight on the tire when on the edge of a curb. If the air pressure is too low, it can cause a snakebite.
1. F
2. T
3. Curb test is when u roll over the tire on a protusion like a curb, so u can see if the curb touches the rim. It will determine if the tires have too low of a pressure, in which snakebite punctures will occur.
Just found you channel, and I love it...Great energy, and awesome advice!!
1. F
2. F
3. Test to check tyres are inflated correctly, by ensuring the rim doesn't touch the ground. Which, cause "snake bite punctures' and too much rolling resistance.
1 - T. 2 - T. Curb test - a test to check to see if you have proper amount of air in your tire.
Good job my friend 👏 👍
This was really great, nice job!
Sick vid mate very informative 💯
Thanks for teaching us 😁😁
1. F
2. F
3. Curb test: roll over the tire on a curb so you can see if there is too low of a pressure.
the shrader valve pin also can be removed by the way...
I have a question. There is a slight squeak coming from the back of my bike. Any ideas on what it could be. I took out the break pads and cleaned the disc, but it didn't help to much.
does it squeak only during the braking ?
@@jolantadziemieszonek9938 no, I don't even know if it's the breaks
@@crb0n181 Check whether the pads aren't rubbing the rotor. It might also be the hub, though it's not that common. Does pedalling impact the sound?
@@jolantadziemieszonek9938 I think it mostly happen when I petal.
Oh damn the pads were rubbing. This makes alot of sense. Thanks
dam. I wish I found these videos sooner. Thank you!!!
1. F
2. F
3. Pushing the Tire onto a piece of wood (or similar) with your body weight to see wether there is sufficient air in the tire to prevent a snake bite. Rim Touching the Curb/Stick/whatever -> too little pressure
1. T
2. F
3. To see if the rims will depress low enough to hit a curb/object, whichcan be caused by low air pressure in the tyre/tube and worse can result to snake bite (flat tyre) onthe tube. If fail, must increase the air pressure.
And can you please let us learn how to straighten a wheel and hoe to adjust it so the spokes will be stiff enough?
Yes we need this
1F 2T 3 the kerb test is a method to see if the pressure in your tire is to low or not
Hi there can we have a video on dt swiss thru axle just spinning continuously
How are you going to do the Nino Schuter's method if you have inserts?
1. F
2. F
3. The curb(kerb) test is done to against the edge of a curb or shar angled surface. This is to test whether the tire pressure is good. If too low the rim and the curb come in to contact causing a snake bite puncture.
Awesome Danny😄
You missed the vintage frame pumps. Zefal HP x4 ----->> The Boss. What a shame!
1. F
2. F
3. Use an object to simulate the tyre going over a curb. Then put your body weight over that tyre when on this object(curb) and see if it goes down enough to cause a snake bite / pinch flat.
1. T
2. T
3. For checking the tire pressure
1.F
2.T
3. kerb test is to check if the tire could roll over it with appropriate pressure, without being snakebited...
1. F
2. F
3. The kerb test is a method to determine if the tire pressure is good
1 thrue
2 false
3 the kurbe test is to see is the tyre pressure is correct on a road bike tyre
Teacher,can we have a downhill race on lunch break?
Y didn't show hand pump 2:50 done how many lb in side tube ? for ex.tube y didn't said how many lb to bomb? please? Let me know ?
1. F
2. T
3. To test if the pressure to low preventing the snake bite and/or pinch flats.
Bonsoir dommage qu on puisse pas lire en français, ça a l air très intéressant 😉
Num 1. F
Num 2. F
Num 3. The kerb test is a method to determine if the tire pressure is adapted to the effect of a small pressure point and the weight applied to it, independently of tire type.
1. F
2. F
3. Ckeck tire pressure
1 False
2 False
3 It’s a test, testing if you can get a snake bite. In other words testing if your tire pressure is to low.
1. F
2. F
3. Used to test the right amount of PSI on your rd bike tire
Hi. Answers: 1. False, 2. False, 3. Curb test is when pressing tire against an edge of curb if tire compresses enough to be compressed between rim and curb pressure is too low and snake bite puncture can happen.
1. F
2. F
3. The kerb test identifies whether or not you have the right amount of pressure in your tyres to avoid having a snake bite puncture.
Num 1. F
Num 2. F
Num 3. the "curb test" is taking your tire and pressing it against a curb to see the pressure of your tires is ball park correct.
1.T
2.T
Test to see if you have enough air on your tire by curb test
1.f
2.f
3. Test to determine if you will get pinch flat on a curb.
1. F
2. F
3. Always check tyre pressure before leaving for a ride
1. f
2. T
3. To test if the tire pressure is too low
1. F
2. F
3, just a simple and practical way to avoid snakebites
Girls from around the world see mini pump: YAWN!!!
1T
2F
3 A method to detect if the tire has a snake bite
1: F; 2: F; 3: a quick-and-dirty test to check for adequate tire pressure.
1.F. 2.T. 3. Test to see how much tyre deforms going over a curb. Touch rim is to low.
Y didn't said how many psi for hand pump 2.9.……?& For ex .y didn't said how many psi ?
psi = bar * 14.5
1. False
2. Not always (False)
3. To see if you will get a snake bite puncture with the pressure you've pumped your tyre at.
1. F
2. F
3. Simple test to see if the pressure is too low
Q1- F, Q2-F, Curb method or 2x4 piece of wood.
1. F. Nino Schurter thumb pressure test works for his body weight only - pressure check is based on tire width and tubeless not rider weight
2. F. lowering pressure always lowers rolling resistance - if pressure is too high lowering it will reduce rolling resistance. If starting a correct pressure lowering it will increase rolling resistance
3. Kerb/Curb test is when pressing tire against edge of kerb/curb if tire deforms enough to be compressed between rim and kerb/curb pressure is too low and pinch/snake bite puncture can occur
🚲 👌👊
False
True
The Curb test can help you how likely the event of a snakebite occurs for your current tire pressure and weight. With that information you can tell whether your tire pressure is high enough or not.
1. False
2. False
3. The curb test is performed by pressing the wheel against a curb or other sharp angle such as a 2x4. If the rim of the wheel touches the “curb” the tire pressure is too low and may result in a snakebite puncture.
F, T, final test to see if pressure is correct.
People are answering #3 like: what is the purpose of curb test, not WHAT is the curb test.
Liebe Grüße aus der Turkei
Based on replies, 4th question should have been how to correctly spell "curb".
false
false
roll the tire on the curb, so that u can test if the tire pressure is low.
Always check tire pressure (with digital gauge) before riding.....Nino's method is just silly.
Lf mtb sponsor xD
bro where to download certificate
1-T
2-T
3-😅
Curb Test is to check the pressure of the tires
I need a rim and you are smashing rims???? 🤕😠
😅
Gj
You left out CO2 cartridges!
1: T
2: T
3: a easy way too see if your tyre pressure is correct to avoid snakebites