When I start my 08 g35 when It’s cold, it kind of stumbles when it starts. Not idle rough.. but it kind of struggles to climb the rpm’s when it’s cold but then levels out when it’s warming up. What could that be ??
So I went to autozone and they told me it’s was my MAF so I got the cleaner thing, did this and my check engine light is still on. Do u think I just need to buy new ones?
Hello. I got error code P0101 for circuit B1 on my Infiniti. Could replacing the MAF sensor fix it? Also I have code P0011 and the car is hesitating/ lagging to pick up power. Any advise for that? Thanks
I’m having the same problem right now cleaned the sensors code came back! Replaced the sensors code came back! Also had codes for Cats both times too but I think they’re shot. What would be next.
You should have ur foot all the way down on the brake and u shouldn’t be moving. My 2009 g37 has that sound occasionally even when I do what I just said. Not sure. But it happened most when my foot is like not all the way pressed down
No they are different. MAF sensors are usually located before the throttle body and the MAP sensors are located in the intake manifold measuring vaccum.
You might have an exhaust leak on your passenger side. But you can try this as well. If theres no leak then probably your passenger side cat. Also make sure to use OEM or Denso for the o2 sensors.
P0106 has to do with the MAP sensor not MAF sensor. Sounds like you could have a vacuum leak somewhere. Check for any loose or disconnected hoses and also try cleaning the throttle bodies.
Yoo I’ve been having a problem with that my engine light came on for the that but it turns out I also have an exhaust leak any chance can you help ? I cleaned me sensor at first but then I spotted the leak
I have a 2011 infiniti g37x coupe. I triggered a P0106 code. Replaced the Map sensor but two months later the light came back on with same P0106 code. Could this be what's wrong? Any ideas.
I have the same exact issue, did you end up fixing it? I replaced the sensor and cleaned the throttle bodies and I’m still having this issue. Maybe this maf sensor will help
You very well should, to be safe. This is super late hope I can still save ya, basically can short out electronics all you have to do is take the negative wire off make sure it’s secure and watch out for sparks when you take off, better safe then sorry for your electronics
when i had that code it was because i had dirty throttle bodys. watch motorvateDIY s video on it its a very thourough walk through on how to do it, make sure to do the idle relearn after. he has a video for that too
Did you notice any difference replacing air intake tube to silicone one?
When I start my 08 g35 when It’s cold, it kind of stumbles when it starts. Not idle rough.. but it kind of struggles to climb the rpm’s when it’s cold but then levels out when it’s warming up. What could that be ??
check the following:
spark plugs
airfilter
MAFS
any air leaks
I know I’m late but did you ever find the problem to ur issue?
Thanks for the video!
So I went to autozone and they told me it’s was my MAF so I got the cleaner thing, did this and my check engine light is still on. Do u think I just need to buy new ones?
I would test them before you buy new ones to see if they are actually working. What code do you have on?
latino914 what do u mean by test them? Are u talking about the app u have in the end of the video? Sry I just recently got into cars
@@chiefbeef2059 yes if you have Android if not you need to D/L OBD fusion for iphones
Hey bro I have code p0300 can you help me when I try & give my car gas it loses power I got code P0306, MAF sender please help me
Mi auto infinity falla , le desconecto el sensor y no cambia el motor sigue encendido como si nada..ayuda
Is there any requirements after as in re learning anything?
hello sir which bluetooth car OBD11 u use0? have link? want to buy it
Hello. I got error code P0101 for circuit B1 on my Infiniti. Could replacing the MAF sensor fix it? Also I have code P0011 and the car is hesitating/ lagging to pick up power. Any advise for that? Thanks
same but mine still has power but i have the code
P0011 is the galley gasket behind the timing change
Do you have to disconnect the negative battery terminal before cleaning MAF sensors?
also wondering this, might have to do it myself
Looked it up and it seems as though you do not need to. No power is flowing though the sensors while the engines off.
I saw it in other video. The answer is yes.
My 2013 M37 Check En light came on(P010B) . Huge loss of power wont pass 50MPH.. im hoping this will work
Did it work
did it work?
So do you need to install something in the car to connect with the app?
OBD2 Bluetooth scanner
Android device
App
💯
2010 g37
Any type of computer relearning needed after?
No not neccessary. When cleaning throttle bodies, it's recommended to do an idle relearn.
@@latino914 that’s if you unplug them tho I Believe. If you keep them plugged and clean them there’s no need for a relearn
I got codes P010B and P0101.... can you please tell me if it's the maf sensor or what else?
The B means passenger side, so I would clean the Mafs. Also what kind of gas are you putting in the car?
@@latino914 I'm in California. I use 91
I'm pretty sure these codes relate to an issue with MAF, or vacuum in the throttle body.
Passenger side ? U sure ?
How can I check the intake air sensor, I’m getting code p0113?
It's the maf there one unit incase anyone else is wondering
Who painted that engine cover stevie wonder?
Could you have done..... better??
😂😂
I’m having the same problem right now cleaned the sensors code came back! Replaced the sensors code came back! Also had codes for Cats both times too but I think they’re shot. What would be next.
What code are you getting? Also replace sensors using OEM not aftermarket.
I’m getting codes p010b, p0420, and p0430. And I’ve replaced the sensors with hitachi ones
@@xohezii4593 clean throttle body, possibly bad cats but unusual for both to go out at the same time. Also O2 sensors and even a weak battery.
@@latino914 I’m going to clean tb tomorrow but could the cats cause the Maf code? Because my cats were bad before the sensors I believe
WHAT APP DID YOU HAVE ON YOUR PHONE TO TEST SENSOR
You have Android phone?
I just change my maf sensor now im getting code p010c and p0102 no check engine light
You still need to use a scan tool to check and see if the code popped up
Is there another app I could use for the reading or another app for iPhone
Obd fusion
Hello
I have a problem in my g37S 2011
When I move the gear to D or R
The engine is knocking
Help me please
Sounds like axles or motor mounts
You should have ur foot all the way down on the brake and u shouldn’t be moving. My 2009 g37 has that sound occasionally even when I do what I just said. Not sure. But it happened most when my foot is like not all the way pressed down
Question, is this Mass air flow sensors the same as Manifold Absolute Pressure MAP sensor? For the infinity G37?
No they are different. MAF sensors are usually located before the throttle body and the MAP sensors are located in the intake manifold measuring vaccum.
P010B on my 14 q50
me too. did u find the problem??
Would this help with code p2096 already change 02 sensors ! Anything helps !
You might have an exhaust leak on your passenger side. But you can try this as well. If theres no leak then probably your passenger side cat. Also make sure to use OEM or Denso for the o2 sensors.
Appreciate it ! Will do all Those !
@@mondiibarron219 did you ever fix the problem?
Good video. Just wondering why you cleaned them. My 2013 G37s has developed a laggy throttle at 60k miles. Would dirty MAF sensors cause this?
Preventative maintenance. Its possible it could help out with what your experiencing.
Any idea on this? Going through the same thing, I know this comment is 3 years old
Wait so you can use the cleaner on the sensor? Why autozone dude tell me I can’t
Dont go to AutoZone 😒
@@latino914 now I know lol
Hey bro i have the codes PO172-PO175 How to fix? I have 2012 Infinity g37s
Possible Exhaust leak, bad 02, bad a/f sensor. Always start with the simplest
@@latino914 when changing the sensors are both sides the same?
I have a p010d code ? Is that for a maf?
Yes passanger side
I have code p0101 any suggestions please, and my throttle doesn’t respond sometimes
Maf sensor or vaccum in the throttle body area.
@@latino914 so do i clean the sensor or get a new one?
@@omogamer-6823 try the cleaning method first
@@latino914 and you think cleaning would take the check engine light away?
@@omogamer-6823 possibly
What if you don’t have bluetooth?
😔
@@latino914 😔
Are maf the same on each side or different?
Same
@@latino914 thank!
I keep getting code p0106 on my g37 sedan would this help make it go away?
P0106 has to do with the MAP sensor not MAF sensor. Sounds like you could have a vacuum leak somewhere. Check for any loose or disconnected hoses and also try cleaning the throttle bodies.
One of my intakes were loose I tightened it up rested the code hopefully it doesn’t come on I was getting code for P0106
Yoo I’ve been having a problem with that my engine light came on for the that but it turns out I also have an exhaust leak any chance can you help ? I cleaned me sensor at first but then I spotted the leak
What engine code do you have? Sorry for the late reply
Do you need the obd adapter to use that app?
Yes you can buy on Amazon for pretty cheap.
latino914 I just pulled out the electrical part of sensor and the engine stayed on I’m about to clean them soon and then check again.
What's the app?
How long did you let them dry ,
Less than a minute with that specific cleaner
As if you're going to actually do this... yourself
What as pp do you use?
??
I have a 2011 infiniti g37x coupe. I triggered a P0106 code. Replaced the Map sensor but two months later the light came back on with same P0106 code. Could this be what's wrong? Any ideas.
You have a MAP sensor code not a MAF sensor code.
@@latino914 ok. Map sensor was replaced with a genuine infiniti Map sensor. Must be something wrong with the connector. Probably dirty.
@@incrediblez394 could be bad wiring, vacuum leak from the intake, loose fitting hose or clamp. Loose throttle body bolts.
@@latino914 Thanks for the ideas. Will have to try these out.
I have the same exact issue, did you end up fixing it? I replaced the sensor and cleaned the throttle bodies and I’m still having this issue. Maybe this maf sensor will help
What’s the name of the apps?
NDS 3 lite. I don't think it's available on iphones.
I have the code p0171? Any ideas?
Bad o2 or a leak around the intake. Check if there's anything loose or disconnected around both intakes
latino914 thank you
Edwin Gutierrez hey did you figure out the issue I have a p0174 code
I had a bad mass air flow sensor
@@trouble3574 I also had the same code and it was MAF. The issue resolved after I cleaned them.
Is there an alternative? this product is sold out everywhere.
Electrical cleaner
@@latino914 my guy!
lastly can air compressor in the can work too? Like the one's you use for your keyboard.
Would this help with the error code P006A?
Yooo I have the same did you figure out what it was ?????
Did you notice improvement after clean.
Nothing drastic mabey just better start up
Ok got it thanks, I think im do it cause my car been laggy lately.
@@Blassie.P cleaning the throttle bodies usually helps with that as well
Do you need to disconnect the battery to do this?
No I did not.
You very well should, to be safe. This is super late hope I can still save ya, basically can short out electronics all you have to do is take the negative wire off make sure it’s secure and watch out for sparks when you take off, better safe then sorry for your electronics
@@kxden2783 with the engine being off, it should be fine
If the car is turned off then you should be good
And i have an Android phone
I have a p0106 code on my g37 does anyone know how to fix that?
when i had that code it was because i had dirty throttle bodys. watch motorvateDIY s video on it its a very thourough walk through on how to do it, make sure to do the idle relearn after. he has a video for that too
Can this fix low idle ?
Possibly with doing a relearn as well and cleaning the TBs
@@latino914 what’s a relearn ?
Both of mine also had five wires
@@danyaguilar7842 its recommended when cleaning TBs. You can either do the pedal dance or use an app like the one in the video.
Latino
lol