For glue ups like that, you can use a large, flat piece of wood add some rails and use wedges to apply pressure. Hope this is a useful suggestion. Love the video.
Excellent achievement I am inspired thank you. I must soon make a large metalwork table adjustable in height over 4 meters in length with 4x directional wheels. Do you think with a 50x50x3mm alunimuim tube or the 80x40x2mm can be enough?
Very nice! I had the same issue with the Evolution mitre saw going blunt after around 20 cuts in 20x20x2 angle iron. I bought a second blade, and we'll see how it goes, but I don't think it's quite up to it.
Good design When legs cross they meet the table corners, table not hanging over part of it, like many UA-camrs show how to scissor lift, part of the table has nothing under. Good luck April 2021
Heb je deze tafel nog? Zo wil ik ook 1 maken voor onze Alex. Die draait graag auto moters uit elkaar. Dan kan ter die mooi op hoogte zetten voor er aan te werken (sleutelen) ik had al gekeken voor 1 te kopen. Maar als ik kan ga ik ze zelf maken.
Hey, ik heb deze nog, maar zoals ik hem gemaakt heb is hij vooral een leuk meubelstuk. Het is een leuk project om te bouwen. Kijk ook even op het kanaal van ab customs. Hij heeft een hydraulische gemaakt in z'n vloet
I do not have all the dimensions drawn out or a plan unfortunately. The table top is 650 x 500 mm. If you draw it in solidworks its fairly easy to lay out the lengths of the legs
Nicely. Done ! I do want to bust your chops a little bit because you were wearing a full face shield but didnt have it over you face ? I spent over 20 years in the Woodworking and Machine shops with both hands on. And management of a crew of over 40 experienced Craftsman not only having but properly wearing the safety gear is really important part of my job was picking up guys from the hospital and getting them home everytime someone got. Hurt they all said the same thing when. It happened it happened so fast or after it happened they couldnt beleive that it just happened to them ? I am not necessarily a know it all. But i did have to carry the OSHA safety card for one of the companies i ran So buying the correct. Gear for the employees was. Essential therefore i wanted to point out to you that you too should be aware of pulling that shield down to protect most importantly your eyes God only. Gave us one set for our entire life i did enjoy the scissor lift a great deal mostly because of the high quality of the one you made and that any decent one available to purchase commercially are super expensive to buy and ive concluded a long time ago. My next. Shop will definitely have one as ive suffered. Physical injuries that. Limits my lifting capacity so ive been looking out for one that may have some portability. Or a way of adapting it to have some Incidentally the. Ones ive seen for sale that do have castors i dont think would roll very well with a load on it. And honestly when fabricating with wood or metal Most things are. Heavy loads
Hey Craig, You are completely right about the face Shield. When grinding etc I usually just use the normal safety glasses but with this saw I normally always use the face mask because it slings metal everywhere. Not sure why I didn't do it this time.. Anyway, the saw was hell to work with for metal so I got rid of it. The scissor lift tables are awesome to work on! This one is more for the looks though
Si no hubiera sido por un poco de todo nunca me hubiera enterado de este canal con videos entretenidos :)
Estoy muy feliz de que un poco de todo también haya compartido mi video. (translated)
You are the best!!!! Eres el mejor!!!!
Thanks!
Best lifting table, shot perfectly 👍 👍 👍 👏 👏
Un poco de todo vengo de parte de el ya me suscribió tus vídeos son interesantes
Gracias!
Vienes de parte de un poco de todo, gracias 👍sus videos son interesantes
Your work shop is very nice
Superb result and craftsmanship.
Me encanto buen video, me alegra mucho haberte conocido❤💙👍
¡Gracias! ¡Eso es increíble de escuchar! (translated)
For glue ups like that, you can use a large, flat piece of wood add some rails and use wedges to apply pressure. Hope this is a useful suggestion. Love the video.
Nice work
Finally a good tutorial.
Thank you!
wow, you are very talented. I thought about attempting it but I've changed my mind.
wow excellent
Thanks!
Cool project.
I enjoy your approach to engineering problems!
Thats nice to hear! those parts of the build are often the most fun as well
Muy buen proyecto sigue así
¡NO OLVIDES QUE ERES EL MEJOR!!
¡Es agradable escuchar eso! Gracias. ¿Cuál te ha gustado más? (translated)
@@Thepracticalengineer el vídeo que más me gustó fue el de la máquina de galletas
Q
Awesome work! 👍🏻👊🏻
Thank you!
Nice..you have a complete tools
very cool table design!
Thanks! I'm very pleased with the result as well!
Good Work. like 2404 I´m gonna start working my proyect tomorrow mornging salut from La Gran Tenochtitlán
That miter saw stand is genius!
Thanks! The removable table system saves a lot of space.
Thank for sharing!!!
Good job bro
Thanks!
Cool Project and nice Style!!
Thanks! I really love how it turned out as well
I am also same work in the Middle East
good fished product - thanks for the video.
Thanks! glad you like it!
Amazing table 👍🏼
Iam huge fan of ur videos
Ratcheting nylon cargo straps are good for clamping wide glue ups, like this one.
Nice! Merry christmas and happy new year 🎉👏
Thanks! Merry Christmas to you too!
You can enchant my armor?
Lovely job and very interesting coffee table 👍 👍 👍
Thank you sparky!
Muy buen video
Gracias!
Elegant table, like your grey eyes
Thanks!
Buen video y feliz navidad bro
¡Gracias! ¡Feliz Navidad a ti también!
Brilliant and really well done 👍
Very nice
Thanks
Very inventive. Have a great Christmas buddy, here's to a fantastic 2019. 👊👊👊
Thanks Martin! Merry Christmas to you too!
I want your lathe turner machine it's beautiful 😎
Bro....You look quite dynamic than your scissor lift ,👍
Metal,,, Always a good and better idea.
Nice Keep it up.
Thanks! I will! Already have some cool ideas for 2019
Excellent achievement I am inspired thank you.
I must soon make a large metalwork table adjustable in height over 4 meters in length with 4x directional wheels.
Do you think with a 50x50x3mm alunimuim tube or the 80x40x2mm can be enough?
Eres genial i diestro.
Saludos de Sicuani Perú ✌️
Thanks!
Thank you very much.
Feliz navidad!!! O Merry chrismas!!!
Happy holidays to you too!
:)
Merry christmas, good video Bro!
Thanks! merry Christmas to you too!
I love being able to combine working with my woodworking tools and my everlast welder.
Yeah, that's sweet! It's nice to combine techniques
Amazing project good sir.
Thanks!
WOOOW YOU ARE SO GOOOD
CONTINUE DOING THIS BRO
Thanks! Glad to hear. I will definitely continue!
Wooow its amazing man
Thanks!
Te sigo por Un Poco De Todo
Gracias!
Very nice! I had the same issue with the Evolution mitre saw going blunt after around 20 cuts in 20x20x2 angle iron. I bought a second blade, and we'll see how it goes, but I don't think it's quite up to it.
I think so too. Probably more for the occasional piece of metal. I got rid of mine because this was the main reason why I bought it
Such a cool design and execution as always! I want one now!
Thanks Ethan! Really appreciate your awesome comments every time :) all the best for 2019!
Hi! Do you think I could build one for dinner table purpose? That I could then convert to work plan. Thanks!
Amazing video! I’m glad to be showing my support.
Thanks! I'm glad too :)
Fijne kerst!
Dankje! jij ook!
perfect
Vengo de un poco de todo...suscrito✔
Gracias!
7y/%
Nice video, keep it up mate!
Thanks! I will, lots of great ideas to come :)
Nice👌👌👌👌
Thanks!
Heel leuk weer! Enne, moet je vaker doen: conceptschets tonen ;)
Hey! Dankje! ga ik zeker doen. Maakt het duidelijker he?
Feliz navidad te sigo por un poco de todo saludos🇲🇽
Good design When legs cross they meet the table corners, table not hanging over part of it, like many UA-camrs show how to scissor lift, part of the table has nothing under. Good luck April 2021
That would make a nice transmission jack.
sure would, maybe change the wheels and the tabletop for that though ;)
I was just implying that the design would work. Not your piece of furniture...
Buen video 👍
Very crhistmas
O como se diga feliz navidad en inglés :v
¡Gracias! ¡Felices fiestas para ti también! (translated)
Cool
Thanks!
Do you have plans for this build
Te quedo Chido te mereses mi like espero que llegues a 18,000 sub
¡Gracias! Yo tambien lo espero :)
Heb je deze tafel nog? Zo wil ik ook 1 maken voor onze Alex. Die draait graag auto moters uit elkaar. Dan kan ter die mooi op hoogte zetten voor er aan te werken (sleutelen) ik had al gekeken voor 1 te kopen. Maar als ik kan ga ik ze zelf maken.
Hey, ik heb deze nog, maar zoals ik hem gemaakt heb is hij vooral een leuk meubelstuk. Het is een leuk project om te bouwen. Kijk ook even op het kanaal van ab customs. Hij heeft een hydraulische gemaakt in z'n vloet
@@Thepracticalengineer ja deze volg ik al lang heb de bouw gezien ja.
How did you fix the brass bush to the metal sections? Using 2 short screws?
Yes, I used two short m10 or m8 bolts for that. It doesn't turn a lot so a bearing wasn't really needed
PLEASE tell me you didn't used a wood cutting disc to cut metal?!
+Joseph Montero haha no, it says its suitable for steel as well.. :(
Metal cutting blades should turn at a much lower speed than miter saw is the problem, I've made same mistake
Wat voor houtsoort heb je hier gebruikt?
Dit is gestoomd beukenhout. Werkt erg fijn en ik vind het zelf erg mooi.
Gaat ook lekker met jouw kanaal zie ik!
Thanks! Ja zeker
Good job Emiel!
PD: where are you from?
Thanks! I'm from The Netherlands
I made it by myself thanks to woodprx.
17mil genial!!
Thanks!
Praat gwn nederlands 😎
Nee
Het grootste deel van mijn publiek is Engels.. Gelukkig kunnen de meeste Nederlanders ook Engels 😊
Intersting a good idea ... GIVE ME ALL THE UNITS RIGHT NOW
Thanks! What units?
@@Thepracticalengineer oh yea i dont think is one in all the world ....
I want to know the dimensions of all parts to draw it in solidworks for my project .
I do not have all the dimensions drawn out or a plan unfortunately. The table top is 650 x 500 mm. If you draw it in solidworks its fairly easy to lay out the lengths of the legs
hello very god vidio
Thanks!
ok
thank and you
the table has a serious case of the weeble wobbles.
It's not so bad, but I like the term: weeble wobbles
@@Thepracticalengineer looll
0,32 wat voor zaag blad is dat
Dit is een multi material blad van evolution. Maar heel eerlijk was ik niet echt gelukkig met deze zaag dus ik heb hem al snel weg gedaan.
6:44 then i can cut it to scheiß
cuanto pesa? cuanto peso soporta?
Creo que es alrededor de 20 kg, y soporta al menos 50 kg, creo (translated
give me full dimensions of this table
Hey, I don't have a build plan for this unfortunately but the top is 650x500 mm
@@ThepracticalengineerThanks bhai
Like
👍
:)
Nicely. Done ! I do want to bust your chops a little bit because you were wearing a full face shield but didnt have it over you face ? I spent over 20 years in the Woodworking and Machine shops with both hands on. And management of a crew of over 40 experienced Craftsman not only having but properly wearing the safety gear is really important part of my job was picking up guys from the hospital and getting them home everytime someone got. Hurt they all said the same thing when. It happened it happened so fast or after it happened they couldnt beleive that it just happened to them ? I am not necessarily a know it all. But i did have to carry the OSHA safety card for one of the companies i ran So buying the correct. Gear for the employees was. Essential therefore i wanted to point out to you that you too should be aware of pulling that shield down to protect most importantly your eyes God only. Gave us one set for our entire life i did enjoy the scissor lift a great deal mostly because of the high quality of the one you made and that any decent one available to purchase commercially are super expensive to buy and ive concluded a long time ago. My next. Shop will definitely have one as ive suffered. Physical injuries that. Limits my lifting capacity so ive been looking out for one that may have some portability. Or a way of adapting it to have some Incidentally the. Ones ive seen for sale that do have castors i dont think would roll very well with a load on it. And honestly when fabricating with wood or metal Most things are. Heavy loads
Hey Craig, You are completely right about the face Shield. When grinding etc I usually just use the normal safety glasses but with this saw I normally always use the face mask because it slings metal everywhere. Not sure why I didn't do it this time.. Anyway, the saw was hell to work with for metal so I got rid of it.
The scissor lift tables are awesome to work on! This one is more for the looks though
Hace 2 meses
"Really easy to make a fire!"
Someone rediscovered fire?
We know what you meant. Safety first.
안녕
Hi!
@@Thepracticalengineer Hello
First
Second
You dont even show the final product or it working
Maybe it doesn't work OR the shots are at the end of the video
It Really is to make fire...well rukker why you doing het ..gek kop.
English Mik.
?
Once you get metal and a welding torch out I have leave cos you are a professional not really DIY
My welding is nowhere close to professional 😯
Welding is not as hard as it seems to get started. You should give it a try at some point
Cool
Gracias!