How to change front wheel bearing on VW SHARAN 7M TUTORIAL | AUTODOC

How to change Front wheel bearing / Front Wheel Bearing Kit / Front hub Bearing / Front wheel Bearing Kit / Front wheel Hub Bearing / Front wheel Bearing Kit on VW SHARAN 7M TUTORIAL | AUTODOC
Top brands that produce wheel bearing : BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/dVFnkp
Wheel Bearing: goo.gl/xJPeKk
Wheel Bearing for VW: goo.gl/BCtZwS
Wheel Bearing for VW SHARAN 7M: goo.gl/qASckp
VW Car parts: goo.gl/TA8ae6
Mobile Shop: m.autodoc.co.uk
► How to replace front shock absorbers on VW SHARAN 7M - • How to change front sh...
► How to replace rear brake discs, rear brake pads on VW SHARAN 7M - • How to change rear bra...
► How to replace Cabin filter on VW SHARAN 7M - • How to change Pollen F...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
UA-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@paulroberts719]

I didn't show him remove the inner race that was siezed on to the drive flange, that's the most difficult part

[@jamiejoker118]

Makes it look so easy ABS sensors always stuck never come out 2nd top strut bolt full of rust and water due to plenum blocked or cover not replaced propley in thr past.And out with the bottles on them. As top nut will not come out lol.
Try a video on REAR DAMPERS shockers top nut is a total B ASTRO do a better bearing puller no need to remove half of the suspension then do the job in situ nice video torque settings should be used as people watching DIY at home will have loose bolts or to tight safety 1st
good luck

[@autodocuk]

Thanks for your comment, we'll take that into account in the next videos.

[@alexnaoum]

Thank you very much for your professionalism

[@autodocuk]

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@variometr5987]

Super!!! Thank your.

[@tji1254]

Nice to see no torque settings applied...

[@cabaiste]

Nice video, can anybody what needs to be removed to replace the rotor splah guards front and rear on this car? I have a ford galaxy 1.9tdi which is pretty much the same car with different branding

[@autodocuk]

Unfortunately, it is not possible to answer your question, you can find this information in the technical documentation for the repair of your car.
AUTODOC

[@markmoz]

I'll be doing this on my Sharan this weekend, I'll also be changing the drive shaft/cv joint. Do you have a video for that?

[@autodocuk]

Thank you for the feedback! We are currently working on creating a wider range of tutorials including the car you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.