Looking forward to my new security door. Im a renter but Im buying mine. I came here to get instructions on how to measure and stayed for the teamwork. That sawing without the horse had me nervous😧😂 Thank you nice job Stay safe and 🎄Happy Holiday
I tried to install this same door in same color today following manufacturer directions and used a 3/16 drill bit but the one way screw is stuck after going in for just half an inch. I even added pressure but its not moving at all so i stopped. What am i doing wrong? Do i need a bigger drill bit to drill bigger holes before j put screw in or do i need a hammer drill instead of a regular one?
Did the lag bolts that come with the door were installed into the actual stucco all the way into the stud or into the small piece of the door trim only?
Salamat kabayan... balak ko ding mag diy ng security door, ganyan din kataas pinto ko kaso kabado ako sa hamba (baka d maglapat) at sa susian baka mag kauntugan kun sakali. More power at ingat!
My door is not level at all and i cant close the doorknob there is a gap on top left and no gap on bottom left. I already installed the permanent screws.. am i permanently screwed too?
You’re not permanently screwed.What I suggest is cut a straight line on the permanent screw that would fit a flat screw driver so you can unscrew the permanent screw.Hope this helps.
Haha I like the fact that he had a baseball bat handy by the door just in case an intruder comes in lol.
iba talaga pinoy madiskarte
Ayos Manong! Astig
Pre drill first for the lag screws
Looking forward to my new security door. Im a renter but Im buying mine. I came here to get instructions on how to measure and stayed for the teamwork. That sawing without the horse had me nervous😧😂 Thank you nice job Stay safe and 🎄Happy Holiday
Great content sir,its very impormative..
Jea's Vlog Thanks for watching.Glad u like it!
After done with outside security, it is time for an inside security too, you can do a quick and easy fix with an AK47 on this one.😎😎
nice hammer flip
Would have looked better with door threshold kit.
You should have used treated wood, it would last much longer.
galing mo kuya jeff wohooh!
Thank you Ryan for watching. Stay safe.
Great content idol good idea marami ako natutunan sau,idol jes
You are nice guy
A double cylinder deadbolt beats a single cylinder deadbolt, hands down.
I tried to install this same door in same color today following manufacturer directions and used a 3/16 drill bit but the one way screw is stuck after going in for just half an inch. I even added pressure but its not moving at all so i stopped. What am i doing wrong? Do i need a bigger drill bit to drill bigger holes before j put screw in or do i need a hammer drill instead of a regular one?
Probably your power tool is not strong enough to get it in or the special tool for the one screw already worn out.
Hey thanks guys!
nice content bayaw,,kita ko na isa kong pamangkin,,, kayang kaya mo lahat,,,,
Papa Ambet's Vlog Thanks bayaw! I also followed your channel (vlog).Walang magawa dahil sa pandemic.
Did the lag bolts that come with the door were installed into the actual stucco all the way into the stud or into the small piece of the door trim only?
The lag bolts that came with the door were actually installed into the trim and the door frame.Thank you. Stay safe.
Where did you get the tool to install the bolts?
It came with the security door.
Brad, D ba tatama yung likod ng door knob ng security door sa susian ng main door? Just curious
Thank you John respect for watching. Hindi naman tumama sa likod ng main door knob para bagong security door knob.May half inch siguro yung gap.
Salamat kabayan... balak ko ding mag diy ng security door, ganyan din kataas pinto ko kaso kabado ako sa hamba (baka d maglapat) at sa susian baka mag kauntugan kun sakali. More power at ingat!
How much do you pay for the door ?
Thank you Relox Vargas. I bought it around $320 tax inclusive. Stay safe.
Door was hung too low. Seal kits are great if installer leaves room and installed properly.
My door is not level at all and i cant close the doorknob there is a gap on top left and no gap on bottom left. I already installed the permanent screws.. am i permanently screwed too?
You’re not permanently screwed.What I suggest is cut a straight line on the permanent screw that would fit a flat screw driver so you can unscrew the permanent screw.Hope this helps.
@@jeffreyson6025 thank you!! I used a dremel with metal piece and cut it and then used a flathead like you said and That worked
Sir great video! Can we hire you to install one for our house po? Sa Vegas din po ba kayo?
Thank you Rara Dejoras . As of now I’m in Hawaii. Stay safe!
Nice work Stay safe >>edvtv
A comment
I know u
the easiest?🤔
Is this supposed to be funny?🤣🤣
.The easiest way
?🤔
Is this a skit?!🤣🤣🤣