@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
Nice one bro. Its very cool to watch all the coustomization that you are bringing in to your robot during the past year. Your projects are always up to date 🙂. Best wishes
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@DIYBuilder My transmitter is not controlling my receiver. If I turn ON the robot, all the wheel will keep on rotating until I switch it off then it stop but I cant control it gesturely. Please whats the problem 🙏🙏🙏🙏🙏
I'm impressed with quality of your video and project. Really great work. I noticed also you've made only 1 state at one time available. I guess making it ride and turn at the same time would be nice improvement :)
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
Hey DIY builder. I love your video's and this one the same but I have a question. I built it but the NRFL01 modules are not connecting to each other and it does not work. Any Ideas why they are not connecting?
Can you make separate video for the countering work and please bro speak bro speak I didn't understand that you have done in laptop or computer OK bro and please tell three uses of around robot please bro and your videos are amazing
Please tell me if I can use Breadboard instead of which you ordered from JLCPCB. Because I don't know what this is and you also not mention at video time 3:34 Please Bro! Tell me. It's very urgent.
Hi, Can I have the outline design of the circuit boards as an image since I am going to build the boards myself and I don't have the software that opens the content in the Gerber zip file. Thanks
need a quick answer pls!!! Why did you use 1 arudino nano + rf nano instead of 2 arduino nano boards (as you mentioned in the description) i hope a quick answer pls!! :)
1:05 is this a saughter gun? Can we use another way to connect the motor with wires ? Help please By the way, thanks a lot for this amazingly helpful video😇🙏🏻✨
Hi I am first in this I have confusion about PCB board after buying pcb board you are some components to it not Arduino and all, some pins and switch like thing and all, what all are the names of that
What are you adding with the jlcbp,we will get it together we buy it from outside or we have to buy individually and if it is then please tell me the names of the components
My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
POV: You are seeing this video because your teacher gave you homework that you have to make a robot or you have to make a robot for exhibition
Bikul sahi yadav ji
You are future predictor
Very true
... EGGZACTLY....
Y'KNOW you gonna be a fortune teller in the future
Salute ✌️💀
Bahut sahi
I wish this guy uploaded this video when I was ridiculously searching for science project for science fare in school days...
I am biggest fan of you please give me this apko science ki kasam
I am looking for science project but it's out of my awkad .. kuki abba nahi manenge
I try this but this hard af, especially in soldering
@@muhammadridho7680 What did you find hard about the soldering? That actually should've been one of the easiest parts.
@@12debaduttadas23 Oh bhai op💥
The best gesture control car i have ever seen
Bro how can we make hand controlor + obistrical avoider + remote crontroler please make 1 video on that
Yes please make a video on thar
where we can buy the white board you have used in the video to setup arduino nano
can you pls provide the link
please make a video for designing that JLCPCB board
Congrats for that project. Really interesting
Thanks
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@sandipdeb9253
I am also . My transmitter not working ,
How did you solve the problem !???
@@DIYBuilder Mine is not working!!! Some told me it's from your code.. Why? Tell me the solution to this problem pls🙏🙏🙏🙏
@@joshuaolaiya have you got any solution pls tell even I am also facing the same problem
Can we use any type of pcb board
I made a same model like it but it failed
I didn't give up
And saw your video for more than 20 to 30 times then understood the problem
Same with me, but I haven't sorted it out. What was your problem with it and your solution to it?
How I get bom and clv file pls help me
Excellent bro 🤝🤝🤝🤝🤝 my full support keep going
Thanks bro
This is a legit great project.
I am looking forward for more to come.
Hope I’ll be working with one of it for my semester project. ❄️🙌🏻
Could you please let me know the software you had used to simulate the code before actually creating the working model
In the end it worked
@@shahinhajamar6538 it worked for you bro?
@@shahinhajamar6538 did it worked?
@@karanpatel8060bro i have used components that are in circuit diagram. But it is not responding
Nice one bro. Its very cool to watch all the coustomization that you are bringing in to your robot during the past year. Your projects are always up to date 🙂. Best wishes
Thanks bro :)
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@DIYBuilder My transmitter is not controlling my receiver. If I turn ON the robot, all the wheel will keep on rotating until I switch it off then it stop but I cant control it gesturely. Please whats the problem 🙏🙏🙏🙏🙏
@@joshuaolaiya Also I am facing the same problem
@@joshuaolaiya same, how you can solve that problem?
Wow amazing 😍👏👏👏
First🥰🥰
Thanks for watching bro
I'm impressed with quality of your video and project. Really great work. I noticed also you've made only 1 state at one time available. I guess making it ride and turn at the same time would be nice improvement :)
Thanks
@@DIYBuilder can u provide me report or PDF of this robotic vehicle on my personal gmail
Shubhamsj077@gmail.com
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@sandipdeb9253 ur battery must be low
Could you please let me know the software you had used to simulate the code before actually creating the working model
Super project bro this is very awesome i like this vedio
when a r&d person watch he was like where is schematic and where are the logics,, for him it was only fascination not a project.
RF nano is complurasly to use please give me answer urgent
Amazing bro U have done great job thanks for making this video
Thanks bro
Bro hand control car receiver and transmitter Ek dusre ko Kitne dur Tak connect Karenge
This is a very impressive video, thank you very much, ratings from México
Thanks man
@@DIYBuilder My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
@@DIYBuilder in both transmitter and reciever we have to upload same programing ??pls reply and pcb is important or not pls reply???😥😥
@@coolwizard1582 no bro there are two different code available . pcb isn't important
@DIY builder sir mera modal kaam nhi kar raha pls help
ADXL335 module ki badle ma ADXL345 use kar sakta ha ka?
Or circuit digram kasa hoga batado yr
Very good
Thanks man
Very nice car sir I liked it soooo much. Appreciate it
Awesome Bro! Love YOU
Thanks bro
Hey DIY builder. I love your video's and this one the same but I have a question. I built it but the NRFL01 modules are not connecting to each other and it does not work. Any Ideas why they are not connecting?
Does the code change if I use a Nano and a nrf24l01 module for the transmitter?
Try using NRF24l01 adapter with that NRF24L01 module
Bhai great job
Thanks bhai
Love you.....bro........
I see your videos only......
Thank you so much 😀
Hello can you code for 6 wheels , rocker bogie mechanism?
Can you tell me how to desgine the pcb
How to buy RF nano?is there any other name of it?
U don't need one
Just buy an ard nano and a Bluetooth module that's it
@@confusednsutian7100 not a bluetooth module, its a nrf24l01
Both are not compatible with each other
@@confusednsutian7100 i dont want to do it that way
Kadak bhai
Thanks Bhai
@@DIYBuilder bro why don't you make a what's app group ??
Thanks a lot, ill make this project.
Did you make it? Did it work?
what do you mean by rf nano is optional?
How can i find components of the custom pcb?
Thats so cool man,keep it up
Can you make separate video for the countering work and please bro speak bro speak I didn't understand that you have done in laptop or computer OK bro and please tell three uses of around robot please bro and your videos are amazing
What is the range of it
Mind blowing creativity, I like it , Would you make more this type model .
And please give me instructions of this all part of Car
Thanks bother 😘😍😇🤔
Please tell me if I can use Breadboard instead of which you ordered from JLCPCB. Because I don't know what this is and you also not mention at video time 3:34
Please Bro! Tell me. It's very urgent.
What if I want the this gesture system in a drone, can you make a video on that???
@Ekveer Sahoo The orientation of the object will definitely fail.
@Ekveer Sahoo you are absolutely right
@Ekveer Sahoo Exactly, that's why i ask him, how to do 'that'...
Hi,
Can I have the outline design of the circuit boards as an image since I am going to build the boards myself and I don't have the software that opens the content in the Gerber zip file.
Thanks
RF Nano (optional)
what do you mean by optional?
can i use arduino nano for transmitter too?
Yes you can
RF nano is just an Arduino nano with a Bluetooth module
You will need an Arduino and a seperate bluetooth module
@@confusednsutian7100 how about program code.. erroe nrf24 eror
need a quick answer pls!!! Why did you use 1 arudino nano + rf nano instead of 2 arduino nano boards (as you mentioned in the description) i hope a quick answer pls!! :)
it's very cool
Thanks
Nice model bro. I'll make it but where are you buying pcb board.. plzz
Awesome
Thanks
very nice project bro, keep it up man
What is the name of the part you put in 3:48 ? Urgent!
switch,male berg strips
Thanks sir you are amazing you are great sir I want to ask you one last thing that this car moves fast or not
Please reply sir
I want to know that dose this project need library for motor driver
yes
What is the grey stuff that you add on your 2 PCB? Thank you for your answer ;-)
6 pin button ?
id love to make this one but lack of equipments
If you want to make a cheap one wait for sometime I will make it. Stay tuned
1:05 is this a saughter gun?
Can we use another way to connect the motor with wires ? Help please
By the way, thanks a lot for this amazingly helpful video😇🙏🏻✨
Can u Make A Arduino 2 Joysticks Control Car, 1 joystick to control the wheels and the other to control a pan / tilt servo chassis
Just for the robot car : ua-cam.com/video/lhGXAJj8rJw/v-deo.html you'd have to modify to add the servos.
Great thanks bro for your help I used for science exhibition
Great 👍
so you did it fr?
Bro tell me the uses of around robot you didn't get reply *please reply*
Bro you are making awesome projects ,be calm your subscribers will increase soon...
Thank you so much 😀
1:46 wrong direction dude
mashala veer bohot psand aya
I need one those
Nice project. But I need your help where can I buy the same PCB like yours used in this video.
wow
i really like your work
CAN YOU JOIN
how to connect RF-Nano with adxl335 accelerometer as a transmitter. Can you tell me the block diagram
Please upload code🤩🤩🤩🤩🤩🤩🥳🥳🥳🥳🥳🤣
Yes
Good edit
Make mini PC
ok bro
Get a raspberry pi
Hello. Sorry im still new to this. What is that soldering tool you used to connect the wires in the gear? Liked and subscribed. Nice videos thanks
It's a soldering iron, if you still need it.
how to upload RF NANO? I tried many times can not
Can i use mpu 6050 plz tell me connection i am noob in electronics like a potato
I HAVE JOB FOR YOU
Yeah even I have a job for you. To clean my house
@@lily-uq5jc mere pas koi job too nahi hai tumhare lie..lekin ek advice hai..khud ka ghar khud hi clean kro sale
@@Piyali240 huh? I don't understand
So nice man! Very cool Project, I gotta build one :D
Bro Create something Unique, something that no was has created.That,s the kind of project people want. This projects have already been created
Unique projects are coming soon bro
Can you use the RF-nano in the receiver as well, It is the same setup but just that one insted right?
Agree
send code please!
In description thank me later
@@bhavaniviswanadh3363 So now its available.. thx for remind me😄
It worked?
We not order with smt stencil for soldering
Who like this will like it⬇️
What are the small components you used to make the PCB
Bothad
Can we use ADXL 345 instead of ADXL 335
can you please tell what you use for the base of receiver and transmitter
I will show this project to my science exhibition. Thank you so much :) :)
did it worked bro?
have you done your project
is it worked
How I get bom and clv file pls help me
Hi I am first in this I have confusion about PCB board after buying pcb board you are some components to it not Arduino and all, some pins and switch like thing and all, what all are the names of that
Bro put a video of coding both the pcb's
When making the reciever and transmitter do i have to connect cables at the bottom or not?
can you tell how to add those light control , like when you started the bot , the purple light also started , so please tell me
Congrats for 100k sub's ❤
Thank you so much 😀
What are you adding with the jlcbp,we will get it together we buy it from outside or we have to buy individually and if it is then please tell me the names of the components
Congratulations for our best project. Can I make it too with esp8266 ?
I cannot find the female connector for the motor driver, can you please recommend the link for the female connector. Thanks!
hi, for the pcb can i use a standard one without any labelling on it?
My receiver is working fine but the Ard nano of transmitter is not working.....the power led of it is not glowing properly and the light is fluctuating.....@DIY Builder please help...the presentation day is very close..... please help
I am also . My transmitter not working ,
How did you solve the problem !???
@@chouaibdownlaod5968 Hi. Are you solve this problem?
@@Maxlllll yes i am
@@chouaibdownlaod5968 Where was the problem ? I have the same problem .
Do I have to order everything separately or will everything be provided in the box?
Separately
What programming language do you use for it
Amazing😍🤩🤩🤩🤩
#ProjeXonic
library files not attach in the video, please add the libraries zip file to complete.
Means sir I can use Arduino nano and nrf24L01 on the place of rf + nano
At the place of rf nano can we use nrf module