@hash include electronics I've replaced the baterry with a one that has more amperage, and now the project is fully functional it works, thank you and i wish you all the best and good health!! 👍
great tutorial, much thanks! I have a question, I have combined everything followed the video, however, I have found that the car can run directly without the transmitter part power on, and just run straightly, how to solve that problem?
@@hashincludeelectronics I have the same problem, what's the issue? I have checked all the wiring and everything is correct. Pls help me to solve this problem. With receiver car motors react, but only make sounds, but without receiver car just run forward. I use rechargable battaries 7,2 V
@@SR_gupta5521 please make sure to buy the products which are used in the project and shown in video to avoid issues. Probably You can return the wrong product you bought from wherever if possible . 👍🏻👏🏻
Great tutorial as always. I have a question. If I use a chassis with only two motors do I have to modify the code? I would appreciate your help, if you can tell me which part has to be modified. Thanks.
Please tell me if I use 9v HW Battery then it will work? Also tell how much power will use to run the car. I power is not sufficient then I will use 2 HW battery of 7v . It will not affect my motor driver na because 14v power is there. Please tell me.
Guys I found that people are facing issues with car mostly because they are using those 9v non rechargeable battery . These batteries do not provide enough current for motors to rotate . So I would suggest to use good rechargeable batteries . Or if you are planning to still use 9v battery then use 3-4 such batteries in parallel together. Cheers 👍🏻
@@TheGuy47YT I generally use LIPO batteries and also I have shared links to it in some of the projects . Will check and share in this project as well .
I am using arduino on both Transmiteer and receiver side i used 3.7 voltage battery ( 3 batterys) im getting 11.8 v by it and i connected it to motor driver and all connections properly the car is moving in circles when i disconnected battery from Transmiteer then also it is moving in circles
Bro my car is working properly when I connect it to my laptop and pass the demo value in serial monitor but not working when battery is connected what should I do
brother while uploading the code of transmiteer i am getting the error :- Arduino: 1.8.19 (Windows 10), Board: "Arduino Nano, ATmega328P" Sketch uses 17392 bytes (56%) of program storage space. Maximum is 30720 bytes. Global variables use 611 bytes (29%) of dynamic memory, leaving 1437 bytes for local variables. Maximum is 2048 bytes. Serial port not selected.
Did you use xt30 connectors or XT60 connectors? I only have a week left for my project I need a response asap if you can 🙏🙏 ( I know its the XT60 now but the connector i got for the motor driver cant fit in the wire hole, can you give me a link to where you bought your connector so it fits in the motor driver hole
Thanks for checking out the video . You can use any simple wires as well to connect battery to car . It does not have to be specific connector . Please use what fits and easy to connect 👍🏻👏🏻
Amazing project dude💖 just wanted to ask there are 3 terminals for motor driver module as 12v gnd and 5v so ive connected battery with 12v and gnd so to take powers for nano should the ground go in the same gnd slot? The 5v is self explanatory but does the gnd slot has connections both from 12v(battery connector) and 5v side?
Thank you very much for checking out the video and nice comment . Yes exactly . You should connect ground from Arduino nano to motor driver as you said 👍🏻👏🏻
Thank you very much I've connected everything as per the video and all the component lights are ON but still the car is not moving as in no motor has rotated yet... can you think of anything that may be going wrong?
Hey mate I wanna know first we will connect transmittor Arduino to the laptop and paste the code and then upload and verify both? And later on we will connect receiver and paste the code and do the same thing? After that just give power to the batteries and will it work directly?and which battery to use for receiver?
Hello again! I decided to just use lithium batteries for the project, but when i turn both of them on ( and yes i checked the wiring like 10 times so its absolutely correct as well as loose connections ) I would move the transmitter and the car would not move at all, but for some weird reason, when i touched the NRF module on the reciever, like tapped it, the wheels would move for a second, but the transmitter did nothing, and I did a simple test to see if the transmitter could send a string of code to the reciever and nada, it would say recieved but not the string of code i put in, so i did a more detailed debugging script, and both of them kept having issues like failing to send the string, or failing to recieve in the serial monitor. Do you know what I can do or what is the issue by chance or if i just need new ones
This is one of the complex projects . It has lot of parts where issues can occur. I would suggest to use serial monitor to see the data at every stage m👍🏻👏🏻
hello very good video just wanted to know is there any good cheap alternative to nrf24l01 because nrf doesnt work at all i tried so many times oplease help
It worked for me . So will work for you too . These are already cheap modules . Check for loose connections. There might some small mistake you are doing . Check the video slowly and carefully👍🏻👏🏻
hello sir i want to do this project on an actual wheelchair, can i use the same componenets as above apart from battery and motor or do i need to purchase different components, please guide me
Yes you will have to purchase different motors and motor driver which will support wheel chair movement load . You need to do some research on this 👍🏻👏🏻
If i wanna use a 9V battery, I need to do some change or it’s good ? And if I want to buy 3.7 V lithium batteries, how many do you have? Please i need for my final project
Hi bro thanks for your help in my project. And I have an doubt that what type of jumper wire should we buy 10+10+10 or 20+20+20or others Plss reply bro
Hi sir, I've done ur project, I've given connections correctly and completed programming too. But it is not working, i thought is there any problem in mpu6050, so I checked the accelerometer with serial monitor using Arduino but at all the three axis it is showing the value 127 continuously what could be the problem pls tell me sir.........
@@hashincludeelectronics ok sir thank you so much, but I checked the mpu6050 in serial monitor using Arduino, in that the axis values are not changing it continuously showing the constant value 127 in all the position, so I bought a new one and checked the sensor in serial monitor, in that for the first 5 minutes it was showing the correct axis values and after sometime I faced the same problem in this sensor too........ What could be the problem sir
@@hashincludeelectronics after upload source code in arduino, no movement in a car. please reply sir ,i am doing mini project please help out of this issue.
Yes you can use other batteries but make sure those are rechargeable. Because rechargeable batteries have good power and provides enough current constantly . 👍🏻👏🏻
Hey i connected the components as per the diagram and it doest work , i am using recharble 7.4 volt batteries and i dont seem to have any faulty parts. The motor arent moving at all , i feel like nrf24l01 arent connected ? Can you think of a probled , also i am using only one 9v battery for the transmitter
Please don’t use that 9v non rechargeable battery . It causes issues related to power . Use only rechargeable battery at both transmitter and receiver 👍🏻👏🏻
Hey I have assembled complete like you have done but still it doesn't work I have used work lithium ion cells for car and one for transmitter but it still won't work.any solutions what can be the problem
Hey I connected the transmitter to breadboard, the pwr and L light up, is the tx and RX supposed to light up too? How do I know if the transmitter is working without the receiver?
I need to ask that how much time does it take to upload the code on transmitter. Because my system is just showing me uploading from last 20 mins. Please Help me in this.
@hashincludeelectronics I'm facing a issue while uploading the code "I2Cdev.h and other libraries not being found" what should I do I did download all the files
Please tell me 9v HW battery is enough for motor driver to run the car. It's very urgent please understand my feelings. Please reply me fast. Please Please🙏🙏🙏🙏🙏🙏🙏.
hi sir, i did every thing in the video but the car is not moving, i ordered nrf24101 only with out the +, is it okay or it should be the nrf24101+ , please answer me
I'm using Arduino Uno in place of Arduino nano. In transmitter circuit can I give 12V DC power via 12V adaptor at external supply port of Arduino Uno in place of V in pin ??
Let me ask, I installed and have all the libraries but my circuit only lights up and doesn't work like the video tutorial, what should I do? Please help me.
Hey is a great tutorial, by the way can u please solve this issue while uploading the code for receiver it's showing error as exit status-1 how can i solve this pls tell me..
You can make it but I don’t recommend it. This adapter solves many power related issues with these nrf modules. Please use this adapter to avoid issues. If you make project without adapter then sorry to say but it will be difficult for me to help you solve any issue while making this project 👍🏻
@@hashincludeelectronics for checking transmitter and receiver nrf24, I checked it with simple transmitter and receiver codes , for 0 print hello, for 1 print hi... But for both inputs 0 or 1 I receive hello only. What's the issue? Is it the nrf issue? As my car is not working with ur provideed code
hello, I did exactly what you did, but when I upload the codes nothing happens, I don't even hear the sound of the microcontrollers operating, do you have an idea for the origin of the problem?
my Nrf 24l01 is not giving any singnal to the car plss help ive used nrf adapter and rechargable batteries and also ive checked serial monitor its shows nothing plss help
hiiii! thanks for the tutorial ! I have a problem: we have assembled everything following the video and the code but only the left side of our car can move but the right side keeps still. And the car is moving even without the transmitter part. Could you please help me ?
hey dude, when I try to insert nrf module on the nrf adaptor it turns off, but then why I remove it, it turns back on. This is happening to both the transmitter and the car reciever. I m doing the hand gesture controlled car using nrf24l01+ and mupu6050 and using 9V batteries.
tthe nrf adaptor is not glowing when connected to a power source, rest all are working perfectly, i have checked all the connections and they all are working just the nrf adaptor is not working.
bro in my transmitter when i connect the +5v volt pin to the power rail the light dosent glow i n the arduino but when i remove it it starts glowing and also the car is not moving
Please check the circuit diagram. Also watch the video carefully and slowly to avoid any mistake in connection . 👍🏻 don’t worry it will work as it worked for me 👏🏻
This is little bit complex project so needs lot of attention and patience. Please check the video again for any missing step. Check for loose connections . Use rechargeable battery . 👍🏻👏🏻
@hash include electronics I've replaced the baterry with a one that has more amperage, and now the project is fully functional it works, thank you and i wish you all the best and good health!! 👍
This is awesome news . Well done and thanks 👍
how much amperage battery bro......How many battery you used bro
Can you please guide me I am facing some problem please reply I am so tence.😢
Please tell me if I use ADXL 345 Gyro than it will work or some changes in code.
great tutorial, much thanks! I have a question, I have combined everything followed the video, however, I have found that the car can run directly without the transmitter part power on, and just run straightly, how to solve that problem?
Please check the video for any missing steps . Also make sure you use only rechargeable battery 👏🏻👍🏻
@@hashincludeelectronics I have the same problem, what's the issue? I have checked all the wiring and everything is correct. Pls help me to solve this problem. With receiver car motors react, but only make sounds, but without receiver car just run forward. I use rechargable battaries 7,2 V
Thanks bro for guiding me .first I make this project but it not work but when I change the battery it work 💯👍🏻👍🏻
Nice to hear that it worked. Good Job 👍
Bro can you help me🙏🙏🙏
How much volt you used in transmitter side bro
Does 9v battery work in the transmitter???
How much volt battery is needed????
Please fast reply it's very argent. In hurry I was purchase ADXL345 not MPU6050. So please tell me there won't be any problem. 🙏🙏🙏🙏 Please.
Please use mpu6050 only 👏🏻👍🏻
OK, Thank you for your answering👍. I waste my money@@hashincludeelectronics
@@SR_gupta5521 please make sure to buy the products which are used in the project and shown in video to avoid issues. Probably You can return the wrong product you bought from wherever if possible . 👍🏻👏🏻
Thanks for the idea i will use it for my final year project
Thanks for checking out the video and all the best for your project 👍🏻
Great tutorial as always. I have a question. If I use a chassis with only two motors do I have to modify the code? I would appreciate your help, if you can tell me which part has to be modified. Thanks.
Thank you very much for checking out the video 👏🏻👍🏻. It will also work with 2 motors . No change in code .
@@hashincludeelectronics Thanks a lot!
Working perfectly Sir!
@@hashincludeelectronics can i use 18650 li on battery instead of these battery?? Or 9 v battery
@@techwith_Aamir yes you can that lion battery . Don’t use 9v non rechargeable battery👍🏻👏🏻
Please tell me if I use 9v HW Battery then it will work?
Also tell how much power will use to run the car. I power is not sufficient then I will use 2 HW battery of 7v .
It will not affect my motor driver na because 14v power is there.
Please tell me.
More than 12 V is not recommended.
Guys I found that people are facing issues with car mostly because they are using those 9v non rechargeable battery . These batteries do not provide enough current for motors to rotate . So I would suggest to use good rechargeable batteries . Or if you are planning to still use 9v battery then use 3-4 such batteries in parallel together. Cheers 👍🏻
^^ this message has saved my life THANKS a lott
It will be nice if you suggest us some GOOD RECHARGABLE BATTERIES which will be perfect for this project (please share an amazon link)
@@TheGuy47YT good to hear that 👍🏻
@@TheGuy47YT I generally use LIPO batteries and also I have shared links to it in some of the projects . Will check and share in this project as well .
How much amp is required bro
You've given 2 codes for receiver, which one to upload?
I am using arduino on both Transmiteer and receiver side i used 3.7 voltage battery ( 3 batterys) im getting 11.8 v by it and i connected it to motor driver and all connections properly the car is moving in circles when i disconnected battery from Transmiteer then also it is moving in circles
May be there is a loose connection. Please check again 👍🏻👏🏻
Bro my car is working properly when I connect it to my laptop and pass the demo value in serial monitor but not working when battery is connected what should I do
I have replied on other comment .
brother while uploading the code of transmiteer i am getting the error :-
Arduino: 1.8.19 (Windows 10), Board: "Arduino Nano, ATmega328P"
Sketch uses 17392 bytes (56%) of program storage space. Maximum is 30720 bytes.
Global variables use 611 bytes (29%) of dynamic memory, leaving 1437 bytes for local variables. Maximum is 2048 bytes.
Serial port not selected.
Select the port in Arduino IDE before uploading the code
Same problem
And I select the port
The solution is set the bootloader to Atmega 328p old loader
I select t’he port
Wow... Good one bro 👍 Keep Going ✌️
Thank you so much 😀
its completely fake doesnt worked at all, i have working since 1 year, its completely trashhhh.....
Sorry to hear that . However what exact error do you face ? It’s worked for us and will work for you too . Dont worry 👍🏻👏🏻
A. O. A d earcollect2.exe error how to remove this error @@hashincludeelectronics
Sir plss reply
Did you use xt30 connectors or XT60 connectors? I only have a week left for my project I need a response asap if you can 🙏🙏 ( I know its the XT60 now but the connector i got for the motor driver cant fit in the wire hole, can you give me a link to where you bought your connector so it fits in the motor driver hole
Thanks for checking out the video . You can use any simple wires as well to connect battery to car . It does not have to be specific connector . Please use what fits and easy to connect 👍🏻👏🏻
Amazing project dude💖 just wanted to ask there are 3 terminals for motor driver module as 12v gnd and 5v so ive connected battery with 12v and gnd so to take powers for nano should the ground go in the same gnd slot? The 5v is self explanatory but does the gnd slot has connections both from 12v(battery connector) and 5v side?
Thank you very much for checking out the video and nice comment . Yes exactly . You should connect ground from Arduino nano to motor driver as you said 👍🏻👏🏻
Thank you very much
I've connected everything as per the video and all the component lights are ON but still the car is not moving as in no motor has rotated yet... can you think of anything that may be going wrong?
@@speedy8740 did you find the problem brother
Hey mate I wanna know first we will connect transmittor Arduino to the laptop and paste the code and then upload and verify both?
And later on we will connect receiver and paste the code and do the same thing?
After that just give power to the batteries and will it work directly?and which battery to use for receiver?
Yes exactly 👍🏻👏🏻
Hello again! I decided to just use lithium batteries for the project, but when i turn both of them on ( and yes i checked the wiring like 10 times so its absolutely correct as well as loose connections ) I would move the transmitter and the car would not move at all, but for some weird reason, when i touched the NRF module on the reciever, like tapped it, the wheels would move for a second, but the transmitter did nothing, and I did a simple test to see if the transmitter could send a string of code to the reciever and nada, it would say recieved but not the string of code i put in, so i did a more detailed debugging script, and both of them kept having issues like failing to send the string, or failing to recieve in the serial monitor. Do you know what I can do or what is the issue by chance or if i just need new ones
This is one of the complex projects . It has lot of parts where issues can occur. I would suggest to use serial monitor to see the data at every stage m👍🏻👏🏻
hello again sir, to power the nrf adapter do we need to connect the 2 jumpers (in l298n) to +5V and GND or both only in +5V
It should be +5v and GND.
Hello. In what software did you made the circuit diagram? I tried in wowki but i can't find the nrf24l01 module. Neither in thinkercad. Kind regards!
I use fritzing . Sometimes parts are not available so I use images and make circuit diagram 👍🏻👏🏻
hello very good video just wanted to know is there any good cheap alternative to nrf24l01 because nrf doesnt work at all i tried so many times oplease help
It worked for me . So will work for you too . These are already cheap modules . Check for loose connections. There might some small mistake you are doing . Check the video slowly and carefully👍🏻👏🏻
Oh then 2 jumper wires for the battery must only go to the 12V socket? Sorry if I am troubling you
No worries . I would suggest to check the video and connection diagram to avoid any confusion . It’s clearly mentioned in it. 👏🏻👍🏻
if we use arduino uno instead of nano does it work same ??? or do we need some changes in code??
It works the same 👍🏻👏🏻
you have shared a photo of transmitter side on software .which software u have used to stimulate iit.
It is fritzing software 👍🏻👏🏻
hello sir i want to do this project on an actual wheelchair, can i use the same componenets as above apart from battery and motor or do i need to purchase different components, please guide me
Yes you will have to purchase different motors and motor driver which will support wheel chair movement load . You need to do some research on this 👍🏻👏🏻
If i wanna use a 9V battery, I need to do some change or it’s good ? And if I want to buy 3.7 V lithium batteries, how many do you have? Please i need for my final project
Yes you can use 9v battery however make sure it’s rechargeable only . You can use 2 3.7 volts cells 👍🏻👏🏻
@@hashincludeelectronics How much amperage do you recommend for 9v batteries?
@@diogomane5359 2 A 👏🏻👍🏻
Hello, are nrf24l01 transceiver module and Receiver modul same thing. Like can u buy two nrf24l01 module and both can work for sender and reciver??
Yes exactly 👍🏻👏🏻
another question is it mandatory for the batteries to be rechargeable? can non-rechargeable just not work?
Yes please use only rechargeable battery 👍🏻👏🏻
Bro can we use 18650 batter for both transmitter and receiver module
Yes you can 👍🏻👏🏻
Hi bro thanks for your help in my project. And I have an doubt that what type of jumper wire should we buy 10+10+10 or 20+20+20or others
Plss reply bro
You can buy mix of 10 and 20 👍🏻👏🏻
can i use
nrf24l01 wireless module the one without the antena?
How did you created the JST connector in 2s Battery to jumper wires??
How you inserted the jumper wire in the JST connector?
Hi sir, I've done ur project, I've given connections correctly and completed programming too. But it is not working, i thought is there any problem in mpu6050, so I checked the accelerometer with serial monitor using Arduino but at all the three axis it is showing the value 127 continuously what could be the problem pls tell me sir.........
It means the transmitter is not sending data . Check for loose connections. 👍🏻👏🏻
same problem bro no losse connections
@@hashincludeelectronics
@@hashincludeelectronics ok sir thank you so much, but I checked the mpu6050 in serial monitor using Arduino, in that the axis values are not changing it continuously showing the constant value 127 in all the position, so I bought a new one and checked the sensor in serial monitor, in that for the first 5 minutes it was showing the correct axis values and after sometime I faced the same problem in this sensor too........ What could be the problem sir
Reply sir pls
HOW MANY VOLTS BATTERY SHOULD I USE?
IS A 7-12V BATTERY ENOUGH FOR RECEIVER?
Yes it is 👍🏻👏🏻
code not running sir, is there any alternate code
This code should work . There is no need of alternate code . What issue are you facing with code ? 👍🏻👏🏻
@@hashincludeelectronics after upload source code in arduino, no movement in a car. please reply sir ,i am doing mini project please help out of this issue.
@@varun1046re-upload the code and check the connections once again.
@@MyHobbyProjects-mg77 i already tried it twice but not responding
Sir can we solder the wires instead of breadbodding
Yes 👍🏻👏🏻
Hey great tutorial! Is it possible for me to use an HC-05 bluetooth modules insteadof nrf? If so what would change in the code?
You can check my video on Bluetooth car using hc05 module . It will give you idea for your project 👏🏻👍🏻
@@hashincludeelectronics thank you!
Does the car changes speed based on the angle of tilt of our hand..?
Yes it does 👍🏻👏🏻
Hi sir, it is just showing uploading and it is showing error what should i do😢but coding ia right
Try changing USB cable . Try to connect to different usb port . 👍🏻👏🏻
Can i use any other battery like 9v battery for both transmitter and reciver , why should only be lipo rechargeable battery can be used
Yes you can use other batteries but make sure those are rechargeable. Because rechargeable batteries have good power and provides enough current constantly . 👍🏻👏🏻
@@hashincludeelectronics can I connect power supply directly into audrino instead of motor driver
shoul i buy xt 60 male or female connector
If your lipo battery has male connector then buy female connector. Or vice a versa 👍🏻👏🏻
Hey i connected the components as per the diagram and it doest work , i am using recharble 7.4 volt batteries and i dont seem to have any faulty parts.
The motor arent moving at all , i feel like nrf24l01 arent connected ? Can you think of a probled , also i am using only one 9v battery for the transmitter
Please don’t use that 9v non rechargeable battery . It causes issues related to power . Use only rechargeable battery at both transmitter and receiver 👍🏻👏🏻
Hello, if I use a 7.4V 800mah 20c 1s battery in this project, will there be any problems in the project? Can you please be quick?
It will work 👍🏻👏🏻
Also can I use the motors from an old rc car
Yes you can if those are working 👍🏻
Bro is it fine if we can use recheargable lithium battery cus I'm not able to purchase lipo battery in my country? Pls reply
@@GAMINGNJ10 yes you can 👏🏻👍🏻
@@hashincludeelectronics we can use the same pipe out address used in your code right?
@@GAMINGNJ10 yes 👍🏻👏🏻
Which programmer , processor should we select
It should be Arduino nano . You can also take a look at video for this step 👏🏻👍🏻
Hey I have assembled complete like you have done but still it doesn't work I have used work lithium ion cells for car and one for transmitter but it still won't work.any solutions what can be the problem
Check for any loose connections. Also make sure you are using nrf adapter 👍🏻👏🏻
so if we directly copy ur code from description, we dont need to install rf24 library right?
You need to install that library 👏🏻👍🏻
Hey I connected the transmitter to breadboard, the pwr and L light up, is the tx and RX supposed to light up too? How do I know if the transmitter is working without the receiver?
You need to connect receiver to see if you are receiving data correctly . 👍🏻👏🏻
how did you copy mpu6050 and i2cdev at the same time?
Please check the video for the exact steps 👍🏻👏🏻
I need to ask that how much time does it take to upload the code on transmitter. Because my system is just showing me uploading from last 20 mins. Please Help me in this.
It should be quick . Not more than 1-2 minutes 👍🏻👏🏻
@hashincludeelectronics I'm facing a issue while uploading the code "I2Cdev.h and other libraries not being found" what should I do I did download all the files
Can you help me install that file
should i take 11.1v or 7.4 for transmitter
Better to take 7.4 👍🏻👏🏻
wow this is cool broo XD! daaamn
Thank you for checking out video 👍
Please tell me 9v HW battery is enough for motor driver to run the car. It's very urgent please understand my feelings.
Please reply me fast. Please Please🙏🙏🙏🙏🙏🙏🙏.
If it’s rechargeable then we are ok 👍🏻👏🏻
hi sir, i did every thing in the video but the car is not moving, i ordered nrf24101 only with out the +, is it okay or it should be the nrf24101+ , please answer me
I would suggest to use nrf+ with adapter 👌🏻👍🏻
Hi,
How did you power arduino nano in the car? Is it from the 12v?
Nope . It’s through 5v from L298N driver . Please check the video and diagram 👍🏻
Bro I gave 7.4 volt power supply for car does this cause the car not to move, because my car not moving
Please charge the battery fully . Also check the video slowly and carefully for any missing step 👍🏻👏🏻
Is it okay to use 3s battery in transmitter instead of 2s?
Yes you can 👍🏻👏🏻
is it okay to use arduino UNO in place of nano for the reciever that is in the car?
Yes you can 👍🏻👏🏻
@@hashincludeelectronics any other battery options??
Hi brother, is it okay to give power to transmitter through laptop using the cable of Nano Board??
You need to provide 7-12 V to transmitter . 👍🏻👏🏻
I'm using Arduino Uno in place of Arduino nano.
In transmitter circuit can I give 12V DC power via 12V adaptor at external supply port of Arduino Uno in place of V in pin ??
Yes you can 👍
Can I use 12 v adapter for reciver for checking
Yes you can 👍🏻
Cann we use other type of power supply or batteries in place of Lipo 2s or 3s battery ?
Yes you can . But please use only rechargeable battery 👍🏻
@@hashincludeelectronics like which type of rechargeable battery?
@@ronakpatel1026 check for LiOn batteries
@@hashincludeelectronics is 12V 2200 mah LiOn batteries are perfect for it ?
You are great bro👊☺️
👍🏻
can i use NRF24L01+PA+LNA WITH ANTEENA(1100M) isntead of nrf24l01+ module?
If module is same then yes you can use it 👍🏻👏🏻
Let me ask, I installed and have all the libraries but my circuit only lights up and doesn't work like the video tutorial, what should I do? Please help me.
Please double check your connections . Also take a look at video again slowly and carefully for any missing step 👍🏻👏🏻
Hey is a great tutorial, by the way can u please solve this issue while uploading the code for receiver it's showing error as exit status-1
how can i solve this pls tell me..
Please check the video for the code upload step 👍🏻👏🏻
do we need to install the 1.3.4 rf 24? or newest is fine??
Newest should be good 👏🏻
what amperage is required for the TRANSMITER because i am using 3 li-on battery for reciver
That should be sufficient 👏🏻
Can we make thins without rf adapters
You can make it but I don’t recommend it. This adapter solves many power related issues with these nrf modules. Please use this adapter to avoid issues. If you make project without adapter then sorry to say but it will be difficult for me to help you solve any issue while making this project 👍🏻
Can I use Arduino nano and Arduino Uno, because I don't have two Arduino nano
Yes you can 👍🏻👏🏻
Do I need to use logic level converter for it?
No. 👏🏻👍🏻
@@hashincludeelectronics for checking transmitter and receiver nrf24, I checked it with simple transmitter and receiver codes , for 0 print hello, for 1 print hi...
But for both inputs 0 or 1 I receive hello only.
What's the issue?
Is it the nrf issue?
As my car is not working with ur provideed code
Can u tell me the name of the wires that you used for connection..
Is that was copper?
If it is then tell me the complete name of the wire..
It’s called jumper wires .
Can I use Arduino uno instead of Arduino nano???
And is there any difference in code for both???
Thanks for checking out the video . Yes you can use Arduino Uno . No code change .👍🏻
bro does transmitter needs rechargable battery or not
plss tell
pls reply fastttttt
Yes .
Brother Can i use li-ion Batterys?
Yes you can use that battery 👍🏻👏🏻
hello, I did exactly what you did, but when I upload the codes nothing happens, I don't even hear the sound of the microcontrollers operating, do you have an idea for the origin of the problem?
Please try changing mpu6050 👏🏻👍🏻
Hello
This problem happened to my project too Did you solve it?please tell me fast
Nrf not communating@@هبهعمار-ذ7ظ
@@hashincludeelectronics same problem
my Nrf 24l01 is not giving any singnal to the car plss help ive used nrf adapter and rechargable batteries and also ive checked serial monitor its shows nothing plss help
Please check if there is any loose connection . That might cause issue .
Hello, is it okay to use 2s li-po batt in receiver?
Yes you can use that 👏🏻👍🏻
hey, can i use L293D driver module from electrobot instead of L298N?
No . You need to use only L298N driver only for this project 👏🏻👍🏻
i uploaded the code and both the transmitter and reciever arduino are lighting uo but when i move the transmitter the motor does not move
Please check the video for any missing step 👍🏻👏🏻
Can i use 9volt alkaline battery for both transmitter and receiver?
No. Please use only rechargeable battery 👍🏻👏🏻
@@hashincludeelectronics i have completed the project.Everything is working perfectly but some time both nrf modules didn't Connect?
Very Well explained❤
Thanks for checking out the video 👍🏻
Can you help me plz if your cart works
Can i use 7-12 V 2s batteries for both transmitter and receiver?
Yes you can 👍🏻
hiiii! thanks for the tutorial ! I have a problem: we have assembled everything following the video and the code but only the left side of our car can move but the right side keeps still. And the car is moving even without the transmitter part. Could you please help me ?
Please make sure you use rechargeable batteries only . Also check the connections again 👏🏻👍🏻
Brother same issue with me also can please provide any solution
hey dude, when I try to insert nrf module on the nrf adaptor it turns off, but then why I remove it, it turns back on. This is happening to both the transmitter and the car reciever. I m doing the hand gesture controlled car using nrf24l01+ and mupu6050 and using 9V batteries.
Don't use 9 v battery
Please use rechargeable battery only 👍🏻👏🏻
brother if we not using nrf adapter connecting it directly what is required ....??? please reply
Please use nrf adapter to avoid any issue . 👍🏻
@@hashincludeelectronics ok
can i use 9V Hi-Watt battery for this?
If it provides good 9v power then yes you can use it 👍🏻👏🏻
Can you please tell me the approx budget for this?
You can easily add the individual components cost to get final budget . It actually depends upon from where and how many components you buy 👍🏻
tthe nrf adaptor is not glowing when connected to a power source, rest all are working perfectly, i have checked all the connections and they all are working just the nrf adaptor is not working.
Please check for the connections again 👍🏻👏🏻
Do Nrf24l01+ 2.4grf workes or not?? transceiver module
Yes we have used the same here 👏🏻👍🏻
@@hashincludeelectronics i really need your help right now can u be available at Instagram or Facebook
bro in my transmitter when i connect the +5v volt pin to the power rail the light dosent glow i n the arduino but when i remove it it starts glowing and also the car is not moving
Please check the circuit diagram. Also watch the video carefully and slowly to avoid any mistake in connection . 👍🏻 don’t worry it will work as it worked for me 👏🏻
The device is not working even though the codes in transmitter and receiver is in. is there some kind of trigger to make this work?
This is little bit complex project so needs lot of attention and patience. Please check the video again for any missing step. Check for loose connections . Use rechargeable battery . 👍🏻👏🏻
please tell what to do if not calibrating
In Bluetooth module ,we declare Bluetooth as transmitter and receiver
Using AT commands,what about nrf24l01 ?
It is defined in code itself . We set the mode as listener or writer 👍🏻👏🏻please check the video and code for more details 👍🏻
@@hashincludeelectronics oka thanks 👍
Can i use more than 12 v battery like 22.5 v
No . Please use only 7-12 v rechargeable battery only 👍🏻👏🏻
Is there will be any change in code or anything if i use nrf24l01 antenna wireless module
No change . It will work 👍🏻👏🏻
Can I use any other option for lithium battery
@hashincludeselectronics can I use 9v can battery
@@topptucker8173 you can use LiOn battery 👍🏻👏🏻 it’s cheap as well .
It is around 1000 rs