Also, I want to thank you for all your efforts making the videos, they are helping me make informed decisions on which direction to move into within the printing market. Priceless.
I was surprised on the gloss paper you just touch it with your barehand but then i saw the amount that comes out blank before printing. On our HP using even semigloss we found we needed to wear cotton gloves to load it because we were getting finger prints or full handprints on the prints when the ink laid up over especially visible on darker prints. It prints right from the first 1/4 loaded though we could feed and cut a section. Thats really unteresting yours feels out like a foot before printing. Thats a lot of waste, but its probably all factored in
Can you guide me on what plotter cutter works well with the 26500 latex printer. I don't want to jump at the Roland printer cutters until I have explored this option first?
Question Any idea where I can get printheads cleaning kit for this printer? And the colors on my prints do not look so good, speacilay oranges and reds, any suggestions?
Hi, thanks a lot for putting out these videos, really appreciate it. Our studio at the university has an old HP Z 6800 and we use it primarily for scientific posters for conferences and a lot of signage. We’ve been wanting to expand our capabilities because people are interested in a lot of display graphics for the walls, windows, and outdoor banners. Would you be able to elaborate on how well the 365 latex printer does with photos and detailed scientific diagrams/images? Thanks a lot for your time, appreciate it
Do you get a lot of heater strikes? I saw when you loaded up your Hp prime gloss that you had about a good foot of blank material before the print started.
Not usually on the prime gloss. I typically only have extra out if I just loaded it or if it's a new roll and the first but is dirty. I do always feed 13oz banner out.
Hi, i love your video. just wondering, can we automate the printing? for example, how can we RIP the image and send it to the output queue without touching the software? any idea
Hey. Designer here again. I didnt get a respond from you. U said toemail you my design pricing. What's your email? If u tell me what u need done I can give u a price here. I was offering to do a free design for u to see if we are a good fit.
dnay@timetomakesomething.com. It's hard to say what exactly I need here in the comments. I have about 10 active projects that have design work needed. From simple tracing to full brochure designs.
@@ttms np I can do it all. U can view all the projects I can do on my website. www.tcart.net/TCart/Graphic-Design Scroll down to the green button. I put everything I can do in my google drive link there. drive.google.com/drive/u/0/mobile/folders/109wj6HJjMAe2OZd0dYhYFWRzVWkSrdrM?usp=sharing
Also, I want to thank you for all your efforts making the videos, they are helping me make informed decisions on which direction to move into within the printing market. Priceless.
I was surprised on the gloss paper you just touch it with your barehand but then i saw the amount that comes out blank before printing. On our HP using even semigloss we found we needed to wear cotton gloves to load it because we were getting finger prints or full handprints on the prints when the ink laid up over especially visible on darker prints. It prints right from the first 1/4 loaded though we could feed and cut a section.
Thats really unteresting yours feels out like a foot before printing. Thats a lot of waste, but its probably all factored in
On the 2nd day though he was wounded from battle, the mighty one brought forth stickers to the people!!! And they rejoiced!
And their rejoicing was great.
Your intro reminds me of a mid 90s webinar.
Can you guide me on what plotter cutter works well with the 26500 latex printer. I don't want to jump at the Roland printer cutters until I have explored this option first?
I'd suggest a graphtec
Question
Any idea where I can get printheads cleaning kit for this printer?
And the colors on my prints do not look so good, speacilay oranges and reds, any suggestions?
Hi, thanks a lot for putting out these videos, really appreciate it. Our studio at the university has an old HP Z 6800 and we use it primarily for scientific posters for conferences and a lot of signage. We’ve been wanting to expand our capabilities because people are interested in a lot of display graphics for the walls, windows, and outdoor banners. Would you be able to elaborate on how well the 365 latex printer does with photos and detailed scientific diagrams/images? Thanks a lot for your time, appreciate it
I use it for everything. In the four years and thousands of jobs, I've only had one customer that didn't like the quality. I'd buy it again.
how good is a latex printer at quality photos large print
I think it's fine. I've done a few for customers without complaints.
Do you get a lot of heater strikes? I saw when you loaded up your Hp prime gloss that you had about a good foot of blank material before the print started.
Not usually on the prime gloss. I typically only have extra out if I just loaded it or if it's a new roll and the first but is dirty. I do always feed 13oz banner out.
I am curious about folded posters. How does the latex printed posters react to being creased? Cracking?
I think if you creased them first they'd be fine, but I'll try it the next time I'm printing some.
I'm trying to catch up some vlogs, I was really busy the past few days but I certainly missed some cool things !
Busy is good. Welcome back. Always a fun time here (except when it's not) 🤣
What software do you use to price your stickers? You said you were opening up production manager? Could you attach a link to that? Thanks man !
I made an Excel spreadsheet that you can buy on my website timetomakesomething.com
Production manager is the software that controls the printer.
Hi, i love your video. just wondering, can we automate the printing? for example, how can we RIP the image and send it to the output queue without touching the software? any idea
There is always a way. I know flexi has some automation with HP websites. I haven't played with it at all.
I find myself yawning along with you. Lol 🤭🥱
Sorry 😁
What size roll can a printer like this take?
Mine is 54" but you can get bigger.
does the HP latex printers allow borderless prints?
You can trick it into doing it, but it makes a mess. I do not suggest it at all.
What is your favorite sticker paper?
HP Prime gloss air GP
COOL
Thanks
whats the name of the sticker paper?
HP latex 315
What are those printers called top left
Time stamp? You can see a list of all my stuff here - timetomakesomething.com/tools
What media did you print the posters on?
The brand is Sihl. I believe the number is 3686
How is your wrist?
It's doing better, thanks.
Great video....
Thanks
❤❤❤
Hey. Designer here again.
I didnt get a respond from you.
U said toemail you my design pricing.
What's your email?
If u tell me what u need done I can give u a price here.
I was offering to do a free design for u to see if we are a good fit.
dnay@timetomakesomething.com. It's hard to say what exactly I need here in the comments. I have about 10 active projects that have design work needed. From simple tracing to full brochure designs.
@@ttms np
I can do it all.
U can view all the projects I can do on my website.
www.tcart.net/TCart/Graphic-Design
Scroll down to the green button.
I put everything I can do in my google drive link there.
drive.google.com/drive/u/0/mobile/folders/109wj6HJjMAe2OZd0dYhYFWRzVWkSrdrM?usp=sharing
@@ttms u can shoot me a text anytime during the day for a quick respond.
(646)529-8244
First again baby
Your Trophy is being mailed to you.
George S Honestly, I could just drive to his house and pick it up
🏆 or a DLC 🙂