The EB Falcon is back! First mods for this Australian Outback survivor, paddock find Falcon returns!
Вставка
- Опубліковано 6 жов 2024
- Guess who's back? back again! THE one and only EB Faaaalllcon! After making it back from half way across Australia* Today I'm making a start on the resurrection of the paddock find Falcon. Its new parts day, the question is what are my plans? what's the next mods? Tune in to find out!
Will it run and drive 500km? Ford Falcon sat for 15 years! Australian farm paddock find. Part 1
• Will it run and drive ...
PART 2! Will it make the 500km drive? Ford Falcon that sat for 15 years Australian farm paddock find
• PART 2! Will it make t...
Facebook
KlingbergMotorsport
Instagram
/ jarrad_klingberg
*Kimba is technically half way across Australia
Use a heat gun to bring the bumper back to life! Thanyou for the good content 😊
👍👍
Exactly
Auto trans fluid on a rag works wonders on sunfaded falcon plastics, also great for the door handles and window plastics etc, lasts a good couple of years before needed to be redone
Q. Best hobby in the world?
A. Modifying cars.
Great video Jarrad, keen for this underdog transformation.
Hey Jarrad, get some old engine oil on a rag and rub it on the old grey plastic. Used to work a treat on the old UK 🇬🇧 fords in the 90s. See how you go👍
Heating up the bumpers with a heat gun will brighten them up works a treat on unpainted sun faded plastic
Falcon-siick mate!! 🥳🍻
The tyre shine you used on the wheels actually works amazing on faded trim. Just did my Jeep with it and the faded trim came up like new and has held up well so far.
Great video and great car... Keep the vision coming.....
Looks great!. Similar stance to the ED XR8 Sprints. Low and muscular. Love the Falcon Vids! keep them gong.
Car looks absolutely mint bro. Love it!
You can try the heatgun on the bumpers but it doesn't always work and you can end up with tiger stripes on them. Mother's does a good plastic trim restorer. You could always paint the lower half body colour like a Fairmont.
Should try some spacers on the front for sure! Looking good though mate!
That EB looks great with the springs and wheels. Good to see the old paddock basher getting some love
Great video. Use some Osren Reblack on the bumpers, they are intended to be grey and will go stripey if heated up. The clamps on the steering boots are actually correct and OEM, amazingly!
A heat gun held not too close and passed over in a wave motion has been known to revive the look of the plastic bumpers.
Hi Jarrad I use Trim Shine trick exterior gel dressing a product from Autostart Australian. If you would like to try some late me know and I will send you a bottle.
Great video well done. Love the content
Heat gun on the bumpers to bring the oils in the plastic back to the surface.
Mate, great to see a young bloke enjoying an EB! Great cars, and as far as those plastic bumpers and trim, I used to use Armor All Original religiously on my EB XR8 and it always looked like new..even after more than 14 yrs of ownership! Good luck with it, looks the goods mate!
Yeah use a heat torch to bring the bumpers back to original love the EB tho wish I owned one once I got my licence or b4 hand I would still have it in mint condition
Great video mate ,the EB looks damm good👍
Heat gun, on the bumpers softens/melts to renew them.
Amazing the difference it makes when you lower it. Looks good. I've seen clips around where people use heat guns around the bumpers to bring the shine back to plastic. Not sure how good it works?
Given the car looks pretty good Underneath. Maybe it is a good idea to bring the car back to Brand New factory condition like in 1991.
From William.
Bill's Channel - sta
I do have quite a few videos uploaded on there now, too
thankyou
She looks mint! Dw about the rust mate, it’s a falcon; they all rust 😂
I recently picked up an ED xr6 - use it as my daily low and slow cruiser while the xr6t gets parked up for a bit.
get some plastic rejuvenator for the bumpers
Use a heat gun for the bumpers mate.
I reckon 30mm bolt on spacers and the heat gun for the bumper...careful not to melt it though..... I subbed too by the way!
Black 12 slots with the white letters out
The louvre would look great on it
nice intro y funny c 😂
Probably my favorite will it run in Australia rn, kinda like the injector / carb intake its got, would be sick to see you keep that 🤷🏽♂️ if your gonna turbo it at some point, do a budget turbo and make a custom manifold with the stock intake and carb thingy 😂 some Max's peeding rods turbo with a peeding rods gate, no blowoff valve because we drive like real men and a cheeky front mount 🤷🏽♂️ the guards definitely need filling in the front 😂 minty build tho man 👏🏾
I love the suspension design on these compared to the "improved" au-ba-bf, its absolute piss easy to work on and upgrade, if you want it to handle like the best car youv ever driven put SuperPro bushes in all the front it'll only run you about $600-$750, also Ultra low Ultraking shocks goes feels really nice front n rear + front au upper control arms with the t.i.performance balljoint adapters makes it steer heaps better.
get wurth plastic care. its brilliant on plastics. it brought the plastics up on my bike like new.
Luv your work, especially the XE transformation and now the EB, Keep doing up the Falcon's. What do your olds think of the XE 🤠💯❗Is there any more Falcon's on the Horizon 🤔🤔🤔👍
Maybe… 🤐. Olds love it 👌
Use some plastic restorer for the bumper. DO NOT LISTEN TO EVERYONE SAYING USE HEAT IT WILL NOT WORK FOR LONG
Smick as f*ck Jarrod!! I did the king springs and monroe gt shocks changeover on me VE wagoon. Makes a difference didn't go as aggressive as you though we got too many speed humps🤣
Noice
ryobi make a good rattle gun
Autoglym silicon free plastic conditioner