Timberking 1400 Mill Upgrades Automation
Вставка
- Опубліковано 5 жов 2024
- Fork Creek Mill - Timberking 1400 Mill Upgrades and Automation
This video consists of the installation of a 12 volt electrical system including a battery, battery holder, control box switches, fuse panel, wiring, solenoids, gears, electrical motor for log turner and a new 27 HP CH752 Kohler engine. Upgrades to the lubrication system included a new aluminum tank and solenoids tied into the clutch switch to turn on the fluid only when the blade is in operation.
Band saws and tractors are inherently dangerous and can be extremely dangerous if not operated properly. YOU, the operator, are responsible for the safe operation of the band saw and tractor. You must carefully read and follow any warnings, safety signs and instructions provided with or located on the band saw or tractor. Do not remove, defeat, deface, or render inoperable any of the safety devices or warnings on the band saw or tractor. All guidelines for proper setup and use provided by the saw blade manufacturer and band saw manufacturer should be followed. Caution should be taken when using power equipment or tools and all recommended safety precautions from the tool or equipment manufacture should be utilized. Thanks
Credit for background music in order of use from UA-cam Video Library;
Intro Backwoods BBQ - Chris Haugen
Solo Acoustic Guitar - Jason Shaw
No Copyright Music Woods Acoustic Folk
Birds in Flight - Dan Lebowitz
Awesome set-up! I'm planning on in near future to add a log turner to my mill too. Was thinking of using the arm with spiked end with double hydraulic cylinders. With the double hydraulic cylinders I can incorporate it as a log dog too. I already have a 12volt hydraulic kit that I have had for a bit. Just got to get the time to figure it out. Thanks for your videos.
I thought about installing one of the 12 volt hydraulic kits it may be the better way to go. It certianly would be easier to use hydraulics for the log dog.
Thank you for the video.
I used cooking oil mix with the diesel and a little paint brush on the blade
I have heard of automatic transmission fluid being added to diesel so the cooking oil should have the same effect at keeping the sap from sticking to the blade. The brush was a good idea.
Like what you did to upgrade your unit
. Do you have a parts lists for the items added to your TK1400? I’m in need of doing something with the log turner as it is nearly impossible to turn the crank with a 24” by 20’ log.
Here is a list of the main components.
AMAZON
MaySpare 12V 500A Winch Solenoid Relay for 8000-15000lb ATV UT Winch Control FOR LOG TURNER WINCH MOTOR
12 Volt Fuse Block, Marine Boat Fuse Block Waterproof 12 Way Automotive Fuse Box with 12 Ground Negative Busbar [100 Amp Max] [LED Indicator] for Car RV Truck Golf Cart
Vgate Lead Acid Battery Terminal Clamps
APIELE 19MM Mushroom Head Push Button Switch Momentary Push Button IP65 Waterproof 12V 24V 36V DC 110V 250V AC 5A SPST (19mm, Red)
MAKERELE Outdoor Junction Box ABS Plastic Waterproof Universal Electrical Project Box Grey Enclosure with Transparent Cover 13.8×9.8×5.9inch（350×250×150mm）
DB Electrical 430-20032 Winch Motor for Ramsey Tulsa Liftmore Pierce Sales 12 Volt/W-9143 /PS534-H, M3300-BB, Black
KanSmart Winch Solenoid Relay Contactor 12V 250A Thumb Truck for ATV UTV Boat 4x4 Vehicles 1500-5000lbs Winch with 6 Protecting Caps - Winch Switch FOR LOG TURNER RAISE WINCH
TUPARKA 50 Pack Cable Gland Waterproof Adjustable 3-16mm Cable Connectors PG7 PG9 PG11 PG13.5 PG16 PG19 Plastic Cable Gland Joints with Gaskets in PP Box
Alex Tech 25ft - 3/8 inch Cord Protector Wire Loom Tubing Cable Sleeve Split Sleeving For USB Cable Power Cord Audio Video Cable - Protect Cat From Chewing Cords - Black
SNS 2W025-N08/DC12V 1/4"NPT Brass Electric Solenoid Valve Normally Closed Water, Air, Diesel
MCMASTER CARR
1497K116 1045 Carbon Steel Keyed Rotary Shaft, Fully Keyed, ¾” Diameter, 9” Long
2737T541 Roller Chain Sprocket for ANSI 35 Chain, 72 Teeth, for 3/4" Shaft Diameter
6280K334 Roller Chain Sprocket for ANSI 35 Chain, 11
Teeth, for 3/4" Shaft Diameter
7265K2 Heavy Duty Roller Chain, ANSI Number 35H, 3/8"
Pitch, 3 Feet Long
7265K224 Connecting Link for ANSI Number 35H Heavy
Duty Roller Chain
6051K15 Roller Chain Breaker for ANSI Chain Numbers 25,
35, 41, 40, 50 and 60
SUMMIT HYDRUALICS
LAFC-04N Hydraulic In-Line Adjustable Variable Flow Control Valve w/ Free Reverse Flow, 1/4″ NPT
How thick do you normally cut your slabs and rounds
It can depend on the log but usually I like to plan for a finished 8/4 slab so I cut them 9/4 or 2 1/4" thick. There are times when a thinner slab of say 1 3/4" or 1 1/2" thick will yield an extra slab of a crotch section so I may proceed that way.
What did you use for the log dog .up and down
I used a 2000# winch with a sprocket attached to it. There is a video for the log dog. ua-cam.com/video/qlceIex2m-M/v-deo.html
Like the 27hp engine. I have the ch 730. If I upgrade, is shaft size the same for electric clutch, pulleys, same muffler etc. thanks. MM
The new motor was a direct replacement which included the muffler, although the muffler exhaust was opposite to the original so added an elbow and turned it vertical. There are several other motors that also match all the way to 32 HP which is what I was going to go for but by the time I was ready to purchase during covid they were all gone so I purchased the CH752 from Timberking. You can find the specifications for all the motors on the Kohler website. There are several reviews on the 27 HP motor where there was an issue with the carburator fouling and needing rebuilding due to the redesign. I have practiced running all my equipment for a short time on a weekly or bi-weekly basis and have had no issues. I did have some surging issues at the start but it turned out the gas hose from the tank was to long and once it was shortened the surging went away. I am happy with it.
My log stops are a hot mess as well. They seem to float and will not stay 90 degrees with the deck.
I welded gussets to the brackets that hold them which helped but the brackets really need to be replaced with thicker metal.
Log stops and log turner are the worst part of my 1400. That said I have to admit turning the water off and on is a pain in the a$$ also.