How to use Starbond CA Glue in your woodworking Projects | Tips, Methods, and Techniques

In this video we are sharing the ways we use Starbond CA glue in both a practical and creative way. We're going to share the techniques and little tips to help you get the best results from the projects that you make.
𝟭- 𝗙𝗶𝗹𝗹 𝗸𝗻𝗼𝘁 𝗮𝗻𝗱 𝗰𝗿𝗮𝗰𝗸 𝗶𝗻 𝘁𝗵𝗲 𝘄𝗼𝗼𝗱𝘀 𝘂𝘀𝗶𝗻𝗴 𝗦𝘁𝗮𝗿𝗯𝗼𝗻𝗱 𝗦𝘂𝗽𝗲𝗿𝗳𝗮𝘀𝘁 𝗧𝗵𝗶𝗻 𝗖𝗔 𝗴𝗹𝘂𝗲
𝗦𝗧𝗘𝗣 𝟭: Sand the wood first. This will create a natural colored dust from the wood, which can then be used to obtain the best color match possible.
𝗦𝗧𝗘𝗣 𝟮: Apply a small amount of Thin CA glue, which will effortlessly seep into any knots or cracks. This allows for a smooth and easy repair process.
𝗦𝗧𝗘𝗣 𝟯: Take off any excess glue that is left over with a cloth
𝗦𝗧𝗘𝗣 𝟰: Use the CA glue activator to speed up that drying process
𝗦𝗧𝗘𝗣 𝟱: Sand back over everything to get a nice flat finish
𝗔𝗱𝗱𝗶𝘁𝗶𝗼𝗻𝗮𝗹 𝗧𝗶𝗽𝘀: *If you've got a hole in the wood to cover up, use a skewed chisel on either side of the hole, fill it with Starbond CA glue, and it can create the effect of a little knot in the woods and cover up the hole
𝟮 - 𝗦𝘁𝗮𝗰𝗸 𝗖𝘂𝘁𝘁𝗶𝗻𝗴 𝗠𝗲𝘁𝗵𝗼𝗱 𝘂𝘀𝗶𝗻𝗴 𝗠𝗲𝗱𝗶𝘂𝗺 𝗮𝗻𝗱 𝗧𝗵𝗶𝗰𝗸 𝗖𝗔 𝗚𝗹𝘂𝗲
𝗦𝗧𝗘𝗣 𝟭: Put a small amount of Starbond CA glue on each of the four corners of the actual wood.
𝗦𝗧𝗘𝗣 𝟮: Use the accelerant on the other piece of wood
𝗦𝗧𝗘𝗣 𝟯: Stack the different layers of wood together. This will allow you to cut out three items at the simultaneously
𝗦𝗧𝗘𝗣 𝟰: Take it across to your workbench and using the different curved gouges and chisels, add detail and depth to the Robin
𝗦𝗧𝗘𝗣 𝟱: Sand everything over to get it nice and smooth
𝗔𝗱𝗱𝗶𝘁𝗶𝗼𝗻𝗮𝗹 𝗠𝗲𝘁𝗵𝗼𝗱:
- Add Starbond thick CA glue to one piece of the decoration
- Put accelerant to the other part of the decoration
- Stick the different parts together
*𝘜𝘴𝘪𝘯𝘨 𝘵𝘩𝘦 𝘛𝘩𝘪𝘤𝘬 𝘊𝘈 𝘨𝘭𝘶𝘦 𝘸𝘪𝘭𝘭 𝘢𝘭𝘭𝘰𝘸 𝘺𝘰𝘶 𝘵𝘰 𝘩𝘢𝘷𝘦 𝘢 𝘣𝘦𝘵𝘵𝘦𝘳 𝘤𝘰𝘯𝘵𝘳𝘰𝘭. 𝘛𝘩𝘦 𝘛𝘩𝘪𝘯 𝘊𝘈 𝘨𝘭𝘶𝘦 𝘪𝘴 𝘭𝘦𝘴𝘴 𝘴𝘶𝘪𝘵𝘢𝘣𝘭𝘦 𝘧𝘰𝘳 𝘵𝘩𝘪𝘴 𝘫𝘰𝘣 𝘢𝘴 𝘪𝘵 𝘧𝘭𝘰𝘸𝘴 𝘮𝘰𝘳𝘦 𝘦𝘢𝘴𝘪𝘭𝘺 𝘢𝘯𝘥 𝘤𝘰𝘶𝘭𝘥 𝘮𝘢𝘬𝘦 𝘮𝘰𝘳𝘦 𝘮𝘦𝘴𝘴 𝘧𝘰𝘳 𝘵𝘩𝘪𝘴 𝘬𝘪𝘯𝘥 𝘰𝘧 𝘱𝘳𝘰𝘫𝘦𝘤𝘵.
𝟯 - 𝗖𝗲𝗹𝘁𝗶𝗰 𝘁𝗵𝗲𝗺𝗲𝗱 𝗯𝗼𝘅
𝗦𝗧𝗘𝗣 𝟭: Use the stack cutting method to cut out two items at the same time, saving you both time and money.
𝗦𝗧𝗘𝗣 𝟮: Use the spray accelerant and Starbond Medium CA glue to put the box together.
𝗦𝗧𝗘𝗣 𝟯: Add the glue to the one part of the design
𝗦𝗧𝗘𝗣 𝟰: Spray the accelerant to the other side
𝗦𝗧𝗘𝗣 𝟱: Stick the lid of the box together
𝟰 - 𝗕𝘂𝘁𝘁𝗲𝗿𝗳𝗹𝘆 𝗗𝗲𝘀𝗶𝗴𝗻:
𝗦𝗧𝗘𝗣 𝟭: Use Starbond Medium CA glue
𝗦𝗧𝗘𝗣 𝟮: Cut the outlines of the butterfly using stack Cutting Method.
𝗦𝗧𝗘𝗣 𝟯: Place the item onto a blank piece of paper
𝗦𝗧𝗘𝗣 𝟰: Cover the item using the spray accelerant
𝗦𝗧𝗘𝗣 𝟱: Begin to fill the gaps of the butterfly design using Black CA glue - 𝘵𝘩𝘪𝘴 𝘸𝘪𝘭𝘭 𝘢𝘥𝘥 𝘢𝘯 𝘦𝘹𝘵𝘳𝘢 𝘤𝘰𝘭𝘰𝘳 𝘵𝘰 𝘵𝘩𝘦 𝘥𝘦𝘴𝘪𝘨𝘯
𝗦𝗧𝗘𝗣 𝟲: Sand off any paper that gets stuck to the woods as well as any excess CA glue that is left over from filling the gaps using belt sander
𝗦𝗧𝗘𝗣 𝟳: Go back to your workbench and apply some wood carving skills to your project to add some dimension
𝗦𝗧𝗘𝗣 𝟴: Add separation from the body of the butterfly
𝗦𝗧𝗘𝗣 𝟵: Use the accelerant and the Medium CA glue to stick a fridge magnet to the back of our butterfly
𝗔𝗱𝗱𝗶𝘁𝗶𝗼𝗻𝗮𝗹 𝗧𝗶𝗽𝘀: *𝘈𝘥𝘥 𝘵𝘩𝘦 𝘮𝘢𝘨𝘯𝘦𝘵𝘴 𝘢𝘯𝘥 𝘢𝘯𝘺𝘵𝘩𝘪𝘯𝘨 𝘵𝘩𝘢𝘵 𝘯𝘦𝘦𝘥𝘴 𝘵𝘰 𝘣𝘦 𝘨𝘭𝘶𝘦𝘥 𝘰𝘯𝘵𝘰 𝘵𝘩𝘦 𝘸𝘰𝘰𝘥𝘴 𝘣𝘦𝘧𝘰𝘳𝘦 𝘺𝘰𝘶 𝘶𝘴𝘦 𝘺𝘰𝘶𝘳 𝘧𝘪𝘯𝘪𝘴𝘩
𝟱 - 𝗦𝗨𝗡𝗙𝗟𝗢𝗪𝗘𝗥𝗦
𝗦𝗧𝗘𝗣 𝟭: Use CA glue for that stack cutting method to produce three items at the same time
𝗦𝗧𝗘𝗣 𝟮: Use the Black CA glue to add a little bit of definition between the center of the sunflower and the petals
𝗦𝗧𝗘𝗣 𝟯: Add depth and interest to the design through your hand carving skills
𝗦𝗧𝗘𝗣 𝟰: Add magnet onto the back before adding three coats of shellac of sanding sealer
📣 𝗦𝗣𝗘𝗖𝗜𝗔𝗟 𝗦𝗛𝗢𝗨𝗧-𝗢𝗨𝗧𝗦 𝗔𝗡𝗗 𝗖𝗥𝗢𝗦𝗦 𝗣𝗥𝗢𝗠𝗢𝗧𝗜𝗢𝗡 📣
We want to thank David Thomas for collaborating with us on this video. Please check out and his social media channels and website:
➡ / @dailovespoonsthomas
➡ [e-mail]
➡ www.thelovespo...
Other social media channels👇👇👇
We would really appreciate your support! 🙌
✔️ / starbondadhesives
✔️ / starbondadhesives
✔️ / starbondadhesives
✔️ / starbond_fresh
✔️ www.pinterest....
#superglue #tricks #lifehacks