3 In 1 || Table Saw, Mini Router Table And Jigsaw Table || DIY Multifunction table
Вставка
- Опубліковано 10 жов 2019
- Hello Friends,
Today I Make a 3 In 1 Table Saw, Router Table And Jigsaw Table. This 3 In 1 table Saw Is Very Useful For Woodworking Workshop And Also Space Saving.
Visit My Official Website : mistrymaketool.com/
Facebook Page : / mistrymaketool
Thanks For Watching..
Hit Like & Subscribe Button.. - Навчання та стиль
This kind of build was exactly what I was looking for. Thanks so much for this build and video. Much appreciated!
Thank you for the video. I just built my first tables and I needed a way to add all of these capabilities to one place w/o sacrificing the table for only one.
Все гениальное - просто! Спасибо огромное! Очень полезное видео!!!
Otima ideia reunir e acoplar as máquinas em uma só mesa e dando ótimo resultado para uso doméstico. Parabéns
this is what i lookin for,thanks for sharing, really nice idea, i need this cause my room not large enough to store many work table :)
@124 Spider lol, even im rookie, i always put safety first ex : diy push stick and push tool, and kit for me and safety add on attach to power tools i use, i know he just build simple and multi table but lack of safety
Kereen bro
Gostei bastante .Só a função da Serra circular que aconselho parafusar na mesa também .pq é muito perigosa se chegar a sair do encaixe que foi rebaixado é acidente na certa
Very well designed and executed! Thanks for sharing.
Parabéns muito bom, fantástico.
Exelente proyecto las tres maquinas en un mismo mueble genial muchas felicidades por compartir tu idea saludos desde la CDMX
Greetings from Vienna (EU). One of the best videos to solve my small workshop problem.
Appreciate this tutorial/video, so much time wasted with all different tables - this is the best table - 3 in one and so sleek and small. No large, oversized equipment lying around. Perfect!!! Brilliant job.
Like the unit, well thought out idea. My only questions are:
1. How straight is the cut when lined up with the fence?
2. Would a finger sized hole in each board make it easier to remove than gripping the Saw Blade?
3. Have you considered adapting it to accept a dust removal vacuum system?
Brilliant idea you have designed and solves many problems. 👍🏾👍🏾👍🏾
It is painful to know that he was never here to answer those questions, so he just dumped the video and left.
Yes, a hole in each attachment is recommended, I also would love to see a 45-degree angle to the saw blade. your points are valid and make this unit a level up.
@@artjiblaframes.7190 He seems Indian and doesn't know any good English to answer you. 😜😜
My question is: what happens when we die?
@@7StrokeRoll if you’re REALLY wondering where man goes when he/she dies, I would be obliged to share with you where I found that answer.
Спасибо Ютуб за рекомендацию. Наверное лучший бюджетный вариант.
Buenas noches caballero. Me gustan todos sus proyectos son maravillosos. Dios le siga iluminando ideas para q las comparta con los q no sabemos pero queremos aprender. Felicitaciones.
Hola me podrías ayudar para decirme cómo se va a poder mantener presionado el botón en cada uno de las máquinas por debajo de la mesa es que soy principiante
Wonderful 3 in 1 workshop table Shaw .
Большое спасибо за интересное и полезное видео! Лайк!!!
Esplendido, vi alguns projetos iguais a esse, mais o teu é simples, prático, e facil de fazerpro meu caso que não tenho espaço! Parabéns!
An excellent presentation you made it simple, perfect and very useful. Thanks dear friend.
Molto semplice anche nella realizzazione, veramente un bel progettino per chi non ha grandi pretese.
Bravo !!!
Very simple also in the realization, a really nice project for those who have no great demands.
Good boy !!!
awesome project.. simple and practical... excellent for amateur DIY ppl like me...
it will help me in 99 pc of my work
kudos Misty... thanx... 👍✅
Parabéns pelo vídeo,muito boa essa bancada multi máquina.
Congratulations on the video, this multi machine bench is very good.
Excelente.
Gracias por compartir.
Excelente idéia, ganhado espaço, Deus continua dando sabedoria ao homem. Parabéns pelo vídeo.
Can u provide measurements,tks.
За год поисков наконец нашлось видео, соответствующее по деньгам Беларуси. Спасибо
Awesome 👍. Quick interchangeability and neat!!
Keep it up 👍
He visto miles de vídeo para hacer guías de corte en la mesa de sierra y rauter, muy buenos por cierto, pero está guia es la más fácilnde de hacer, la más cómoda, segura y precisa. Muchas gracias por toda la demostración.
Hola por favor me podrías Cómo se va a poder mantener presionado los botones de cada máquina por debajo de la mesa te pregunto a ti porque vi tu comentario en español y porque seguramente tendrás la respuesta de antemano muchas gracias a
Self drilling screws are awesome!!! 😀😀😀
Simplesmente magnífico muito bom mesmooo, sem lero lero e com uma precisão fantástica e música na medida certa
Também gostei, só faltou mostrar o corte a 45 graus
Namaste your ideas are great and excellent. this is ideal for my small work shop.
Hi bro
Your FENCE idea is one of the Best & super easy I have ever seen...
Hundreds of Likes👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks for sharing
Amazing! Thanks. Godbless.
Estimado excelente tu proyecto, tú serias tan amable de compartir las medidas, desde ya quedo muy agradecido
Impressive..thank you
5 Stars, great Guy! Br from Germany
Very nice. Thanks
Danke für die Idee mit den Führungsschiene! Weiter so...
Very good video, it wasn’t TIL the last seconds that I realised all three tools were using the same table. That’s why I don’t post videos and you clever guys do. Well presented. I will definitely make this as soon as I find a suitable jigsaw and router.
Keep up the good stuff, brothers.
Sir, could you please tell me what are the Routers used for... I see different types of Routers there in the market.. Is it that different types of Routers are required for different jobs... Please let me know.
T&R-Antony.
@@JA-xw9uf for this type of application, where the router will be part of the table and can be removed, it's best if you go with trim router, not a fixed base router or a plunge one. Those last two are too bulky and need to be disassembled from their bases to install them on this plate.
@@jellyg.8961 You're not quite right. I have been using this system of interchangeable mounting plates for several years. As a router I use B..ch POF 1400 ACE or spindle K..ss 1050 FME. The only difference is that my mounting plate is 15mm thick waterproof plywood. All mounted machines (top milling machine, circular saw, jigsaw and plunge milling machine) work perfectly and without the slightest problem. Replacement is very quick and convenient. It is very important to have the upper poles of the mounting plates at the same height after insertion into the table. For fine tuning, I use rectifying screws located in each lane of the replacement plate. It's super!
What the gentleman is showing here is a wonderful affair for all those who work with wood as a hobby and do not want to waste big money on machines that they will not even use to the fullest - let the professionals keep them. This is enough for us for hobby use.
Your comment is probably based on a misunderstanding of the described issue.
Parabéns meu brother, me deu uma boa Idea! Muito bem feito e também muito detalhista! Tem como passar as medidas? Obrigado. DEUS abençoe vc e família
Setuju.....dari indonesia jga minta ukuranya
Muy buena idea y contrucción de la mesa felicidades !!! Saludos desde México !!
Hola buenos días crees que me puedas ayudar por favor para decirme cómo se va a poder mantener presionado el botón para echar andar las máquinas por debajo de la mesa? Soy principiante
Simple and useful, this video exactly what i need, thanks you.
nicely done i’ve made many similar tools minus the removable inser to switch out the tool i usually made one on every job i had to install Millworker on for cutting small parts on mostly scribe strips to match the existing conditions on a job site to give a more professional installation on custom Woodwork my shop built i usually held the power tool in place using metal mending plates or straps i carried in my hardware supply box from job to job that allowed me to not have to use existing holes or drill more into my tools overall it worked for me as a rule i was assigned to 25 or30 job sites a month to install my little bench or table tools only needed to perform for that particular job i made it for many times they were discarded after their use was done of course without the tools attached
Thanks for the idea... Good job. Greeting from Indonesia
Funnily enough I thought about something like this the other day ... and here it is haha! That works! :D
Cantik
I really liked your project!!
BRAVO BRAVO BRAVO
Es sin duda alguna la mejor mesa tres en uno que he visto por ahora, me encantan tus ideas, estoy cogiendo buena nota, muchas gracias
supiste la medidas que uso???
@@ematixwebcorp.4404 no me adapte a una mesa de ordenador que tenía sin usar y la adapte a las medidas de las máquinas.
Great project, could share the measurements.
Regards.
Genial!!
Excellent ! Bravo ! 👍
buenisimo ! saludos desde Chile
This content fun and looks so easy when the fact it's not😅
Great video and great skills👍👍👍
Exactly. He made it look easy.
Wowww!!! versatile table
Молодец отличная работа.
Grandiosa Idea gracias por compartir su sabiduría
Great idea, make me inspired to create multifunction of table saw, salam from Indonesia 🙏
Thumb up before watching 😘😘
bahut achchaa idea aur practical solutions instrumentation ka , woodworkers ke liye preranadayak, simple aur behatarin tarika batane ke liye bahut dhnyavad
Parabéns Muito muito bom.
Practical and satisfying to watch! Ty!
Genial idea y muy práctico. Saludos desde España 🇪🇦
👍👍👌👌🙌🙌
Simply perfect 👍👍
Espetacular, vou copiar sua idéia gostei muito.
Very nice demonstration. I will use it and modify it according to my purpose . Thanks mistry
Super, echt klasse, großes Lob!
Sos un genio, me encantó!!!👏👏👏
Brilliant ideas... thanks for sharings...
Must say , very nice job . big like.
TRAVAIL MAGNIFIQUE TRES BONNES IDEES. BELLES PRISES DE VUES FELICITATIONS👍👍👍👏👏👏🙏🙏
🙏 UN BRICOLEUR MARSEILLAIS
Great job! Great idea!
Ha soy colombiano admirador de su sabiduría.
The fence idea with angled metal bars is a novelty. Havent seen that before.
Yes, it´s a great idea and the solution to one of my problems. (-:
Briliant!
@@arienugraha8961 ☺
How
perfect inspiration, thank you
Very very very good!
Thank You very much!
Idéia valiosa. Gratidão
el mejor banco que vi para herramientas manuales mañana mismo empiezo a construirlo gracias
I can say that u are a very good skilled person or a like a professional people. The way u were working with great accuracy. I salute u for that. The only thing that u showing on web page for all different kind of attachment u are hiding all the measurement n sizes, so even if I want to make like that u need the measurement. So cannot make it my self. So what way u are trying to help your followers . That's a big question mark. Your ideas are all great n practical for yourself. So how u are helping your followers they so can benefits otherwise it's useless n only very skilled person who has a big work shop with all the tools can get an idea n he will understand n make use of if but the beginners do have that benefits. He will attempt to try n try till u succeed. I love your idea of your 3 In one work table of router, jig n saw machine. It looks to that I can give an attempt to make but it will a lot of correction to do as in this table all the attachment are separate n the table is one but the gliding part will need attention to function properly .
Thanks alot for your great displays.
Me parece perfecto....saludos.
Number one unique style never seen before thanks
Sooooper fentastic,Simple, acurate,very useful devise. Good idea.
Excelente mesa nos participas las medidas, inicio en la Carpintería y quisiera hacer una tablet como está. Thanks congratulation.
Show adorei, vou replicar👏🏻👏🏻👏🏻
Double your nut and/or apply some blue loctit, it will avoid them to get unscrewed with vibrations.
Nice tutorial, thanks !
parabens otimo serviço. vc e muito inteligente
lovely video excellent and short instructions. loved it.
This Is what really need,thanks for sharing and I hope this videos help others to learn.
Great job.. thanks definitely .. would like to try to make this one.. all the best.. warm greetings from Bandung Indonesia
Gracias muy didáctico ,¡🇨🇱🇨🇱🇨🇱🇨🇱
Thanks for teaching!
Ola amigo excelente trabalho parabéns
Amazing!
sensational idea, success always
वाह भाई! 👍 मान गए।
This is such a good idea. Different than all the other 3 in 1 router/jig/table saw tables.
Show de bola. Parabéns. André
Just what I'm looking for. Measurements?
Well done!! I love the idea to make a multifunctional table. I think I gonna copy 2 things, if I can;)
The only things is, how to make the machines run without holding the button + security buttona as well? Hopefully there is better way then only cable ties.
Tie the button using cable ties and u will run the machine continuously.
Love it! Great idea!
Excellence ,can you give me How size cm for all ?
very nice work
Thank you for your video.
Great DIY project to try.