Sign up at ELECTRONOOBS.io: electronoobs.io/ Follow me on FACEBOOK for more: facebook.com/Electronoobs help me on Patreon: www.patreon.com/ELECTRONOOBS
I saw that and thought "did I just see magic smoke?" and watched it again a couple of times and died laughing! I dropped down here to make a comment and sadly you beat me to it by a year. LOL!
The Ground/Earth should be bonded directly to the Case with a Shake proof star washer and to the supply ground . Do not rely on the screws on the supply brick to ground the case as they are going through a painted surface .
You and Greatscott! talk almost the same way to my hear. I mistake you guys sometimes. I love you guys so much. you guys are doing a great job. I've learnt so much from you guys
hello, I see that in your video description, it is Banggood link, they are not going to sell the RD series power supplies any more after clear their warehouse stock,if you like, you can use our RD aliexpress official store
At 2:58 are you sure that you labelled correct dimensions 😛 I mean it should be 40mm in height and 50mm in width !!😜 Even the best of us can make mistakes 😂. I love your videos and watch everything very carefully.🥰👍👍
@@Utube2Itube do you click the wrong file link, you can try this three link to download the PC software: A: Main download llink : drive.google.com/open?id=17V-JWHvqMF-NuWSznEiJ4RKrnn_Pkt5v B: Mediafire:www.mediafire.com/folder/ssjf3s35ev68v/RD6006 C: Back up download link : www.ruidengkeji.com/rdupdate/software/RidenPower/RidenPowerSupply_V1.0.0.6.rar
I bought one too. But I am not happy to see it’s only disconnect one wire with the main switch. I will replace this switch with a 4 wire switch. Here in Germany you can have live and neutral switched.
17:00 The drop in efficiency is at 4 amps, not at 5 amps. They are selling a set here with a 70V power supply, I guess the efficiency would be 1-2% lower than the 48V curve.
The psu seemed like it's weak point, also it racked up the price quite a bit, so I used a good quality scavenged atx psu instead, with a $7 65v 400w boost converter, drilled a few extra holes in the casing, and I gotta say it works great, there's no significant ripple even when running at full power, and it's pretty much on point.. It's nothing like the real deal or nowhere near any linear supply, but for the price it's truly great
this whould have been awesome to use for a server power supply to power RC hobby battery chargers except for its very low amp rating. too bad. I need something capable of 70A or more to keep up with my Icharger 308duo and HP HSTNS-P11 power supply.
After entering the MENU, to go BACK or ESCAPE, press the Potentiometer Knob! I thought it would be good to mention here since it wasn't mentioned in the video, and I had to read the manual to find out how to get out :-P
Can you please link the tutorial for the mini power supply you showed at the 12 seconds? I am very interested in putting one together. Great video review 👍🏽
Hi sir, Please can you suggest me about RIDEN RD6012. Is it suitable for mobile servicing shop ? can i use it for sort killer for mobile motherboard ? please write me details . I will be helpful . with best regards , khan.
I´ve ordered this psu from a seller on E-Bay 2 times, but I´ve never received it to this day... I got my money back, allright, but I just wanted that goddam´n powersupply... One of these days... ;)
@@ELECTRONOOBS No, it was´nt cause of the virus. ...It was very strange. It was returned to the seller, he sent it again, and it came back. I got my money back, så I chose another seller. ...With the same result!!! ...So i put it on ice for a while... But I REALLY would like that PSU. :) ...Sometime in the future. ;)
they really are a nice PSU for the Price!! I really thought i would have seen you do a review on this earlier.. its been out a good while now!! i dont remember anyone pointing out that it needs connects a router 1st before your phone(kinda obvious but something ya would over look) but its been a long time since iv seen a review on this one!! it really is worth the money but maybe a bit to complicated for my needs.. Now Why do you have a banana in your shot always??
@@ELECTRONOOBS maybe complicated was a bit harsh! but as a first PSU it wouldn't my choice!! it would(or might even be) be something i would build up to as i gain more knowledge. like a little gift to myself.. i think i might have asked about the banana before!!
Why do you have a banana always lying around on your workbench. By the way, I am really impressed by the quality of your videos and the depth you go into. You are 200times better then greatscot. Really bro, you are the inspiration for me to do engineering in electronics.
I have the rd6006p since today and I hear a faint high pitch sound when I turn on the voltage output. The sound becomes less when I increase the output voltage and from 35 volts the sound is gone. Do others have this too? Or is this a defect?
I have two notes. You can download the app for IOS as well (I have it). I like RD6006w. The only disadvantage is to be switching power supply not a linear one. For less than 200$ you can have high-quality linear lab supply (not soo powerful, but usually you will be fine with 20v 2-5A). I do not get why they put thermocouple inside when it is for outside use?!
Got mine for 40USD on banggood. when they sell it low like that, does that mean we can expect a new model soon? I want one with 80-100V so I can use it for ebike and scooter charging. I did see in the changelog from the android app that support for "RD6012" was added. A 120V model maybe?
I suggest that you look for a different kind of supply for higher voltages, rather than a lab/bench PSU. A purpose-built battery charging unit would likely be much more economical.
Why is it that you need to connect the USB to use it with the PC? Why can you not just use WIFI? I heard, in another review, that the WIFI feature does not work for the PC and that makes ZERO sense to me. Does anyone know a logical reason for this?
Presumably this is a software implementation issue (i.e., the PC software is not mature). I would look to open-source alternatives for controlling this PSU. It's a popular series of PSUs so there is likely to be more development on the open source side than from the vendor as time goes on. Here's a github repo to check out for starters: github.com/rfinnie/rdserialtool
The thing that I dislike is that I want to buy a PSU like this, but for it to run you need another PSU that supplies 60V to it first. Why can't I connect it directly to a normal 230V wall plug? Its kinda an awkard product, if you want to start out and don't have a PSU already.
If anyone interested, you can find my custom firmware for RD6006. If you have any ideas, wishes, what to change or add in to the firmware, or found bugs, just let me know. www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/225/ monitor.net.ru/forum/threads/651114/page-6
Hello friend. I am worried by Spain CoVID 19 status. Please be careful and stay indoor and don't open any parcel without heat treating. Exposing to heat gun can kill all viruses.
If you are spending almost 100$ then why don't you buy a supply from a reputable brand? You will have better resell value and wont kill your projects or burn your house down.
For comparison's sake, which "reputable brand" has comparable specifications and features for less than $100 USD? There are lots of bench PSUs for less, but I don't know how many of them are from "reputable" brands with any resale value to speak of. I'd be glad to buy a brand name PSU to match (for example) my oscilloscope, but there's no way it's coming in at that price point.
WiFi card is useless without an actual app or program that’s actually working without the virus warning. The app they have online doesn’t work well at all. The program for PCs has been taken down on all mirror sites.
Best firmware for 6000 series is on EEVblog. Google *UniSoft RuiDeng Riden RD6006 DC power supply* for forum. Below is the Change log. You can always return to stock firmware at anytime. In case of any problems while update, keep pressed [ENTER] while power on device, to run device in BOOT mode. RD60062_V1.32.x.bin - my custom firmware. (where x - is the build number (sub-version)) RD60062_V1.32.bin - original (stock) firmware. If you want to return to stock firmware, recommend to set default setting To do this: keep pressed button [0] while power on device. --------- History: --------- --- RD60062_V1.28.1.bin --- * Initial version * Optimized, get rid of HAL Libraries... switched to LL --- RD60062_V1.28.2.bin --- + The menu was complete remade, now I can easy add new items. + [SHIFT] + [Left/Right] - switches the current layout (without save in settings) (if need to set layout after power on, then can do it over settings menu, as before). + For 'layout 1', can be enabled/disabled items. + Added OPP (Over Power Protection). + [SHIFT] + [MEM] - used to setup OPP + OVP, OCP, OPP - now can be disabled by setting it to 0 + When entering OVP, OCP, OPP, SHIFT button will be highlighted as well (to visually distinguish input: V-SET from OVP, I-SET from OCP). + The RIGHT button now works as a Backspace when typing. + When turned on the internal fan (the one that is on the module itself), icon will be displayed. --- RD60062_V1.28.3.bin --- + Added setting for current cutoff in battery charger mode. + Added setting for batt temp. cutoff in battery charger mode. + Added Battery Charger Layout + Added Setting to skip keypad lock when connect with software. + [MEM] + [.] - now used to reset Wh, Ah --- RD60062_V1.32.1.bin --- * Updated to version V1.32 * Bug fixes --- RD60062_V1.32.2.bin --- * Bug fixes + Option "Digits Style", can select style for large digits (32x64, 12x24, 7-Seg) + Decreased minimum battery voltage from 900mV to 300mV --- RD60062_V1.32.3.bin --- + Support WIFI * Bug fixes --- RD60062_V1.32.4.bin --- * Fix TTL Interface --- RD60062_V1.32.5.bin --- + Option "SkipExitIVSet" (prevents exit from edit mode for V-SET and I-SET when press ON/OFF button). * Bug fixes --- RD60062_V1.32.6.bin --- + Option "Standby LED" (Setup the behavior of the power button LED in power off mode (Default-pulsating, 0%-off, etc...). (in modes 0% and 100% power consumption will be less (cause no need software generate PWM and can switch MCU in to the sleep mode) * Bug fixes --- RD60062_V1.32.7.bin --- + In power Off mode now using hardware PWM (except pulsating mode) for Power LED and turning off unnecessary peripherals, to decrease power consumption. + Remade function to enter values. * Bug fixes --- RD60062_V1.32.8.bin --- + Option "Save Mult." to save current multiplier (for current session only, reset after restart) * Increased minimum battery voltage from 300mV to 500mV (Due to some instability) * Bug fixes --- RD60062_V1.32.9.bin --- + Added option "Power State" (Power On, Power Off, LastState). Sets the state after power on (without a battery, LastState will not remember the last state). + Added option "Power Switch" to turn On/Off the primary PSU. (5V standby power supply required). (Note: Adds a 3 second power-on delay). The control output is routed to the PA14 port (pin 4 of the J2 connector). High level - turn on, floating or low level - turn off. Note: the maximum load on the port is 20mA !!! (it is better to use an optocoupler). + Added option "AutoPowerOff" to automatically turn off after a specified time if the output is disabled. + Added option Home:"Status Info" allows you to choose which parameter to display in the status bar (if you need something else, let me know). + Added option Home:"Mem Hint" If enabled, then pressing any number key will display a hint with the current settings in the corresponding memory cell for 1 sec, a second click during this time will apply these settings. + added new parameter "7-Seg v2" to option "Digits Style", where "input", "vset", etc. will also be 7-segment. + Added display of the system temperature to the caption. + Minor improvements --- RD60062_V1.32.10.bin --- + Added option "Screensaver" to decrease brightness (ScrsaverBright) after specified time. (Note: "ScrsaverBright" must be less or equal to "Backlight") Press any key (except ON/OFF) will turn on backlight and restart timer. + Added option "ScrsaverBright" Screensaver Brightness (0-complete turn off backlight, 1-equal to "Backlight"=0, 2-equal to "Backlight"=1, etc) + Added option "ScrsaverActive" Allow activate screensaver if output is in active state. + Removed meaningless icons from the caption. + [Left/Right] - switches the current layout (without save) (no need press SHIFT anymore) - Removed Layout 2 (Layout 3 already shows all values). + Minor improvements --- RD60062_V1.32.11.bin --- + When edit "ScrsaverBright" or "Standby LED" now you can see the real effect... + Added option "Comm Buzzer" make a sound when the software writes new parameter(s). + Option "Mem Hint" now can select the time how long show the message (2, 3, 5 sec) + Added option "ShiftMemTable" Press SHIFT to display the table with settings for all memory slots. + Added new menu group "- Colors -", now you can choose what color (one of 15) to use for the next parameters: Voltage, Current, Power, Input, V-Set, I-Set, OVP, OCP, OPP, Ah, Wh, Temp, BattVoltage, BattInfo (Layout 2). Option "Custom Color" allow to use selected colors (using this option you can enable/disable custom colors in bulk). Option "Test" is just temporary option and will be removed in next release, can be used to see any color and its hex value. List of colors need be adjusted, if you have any ideas just let me know (tell me hex values). Here is the current list of colors: const uint16_t g_colors[16] = { 0, // 0 - Default C_RED, // 1 = 0xF800 C_GREEN, // 2 = 0x07E0 C_BLUE, // 3 = 0x001F C_WHITE, // 4 = 0xFFFF C_YELLOW, // 5 = 0xFFE0 C_MAGENTA, // 6 = 0xF81F C_CYAN, // 7 = 0x07FF // C_LIGHT_BLUE, // 8 = 0x01CF C_GRAY, // 9 = 0x8410 C_BROWN, // 10 = 0xA145 C_ORANGE, // 11 = 0xFD20 C_OLIVE, // 12 = 0x8400 C_TEAL, // 13 = 0x0410 C_PINK, // 14 = 0xFDF9 C_MAROON // 15 = 0x8000 };
--- RD60062_V1.32.12.bin --- * Bug fixes + Some Improvements + New option "Max Power" to limit the power of primary PSU. (came from RD6018). + Fixed Layout 4 + Added more options for Layout 1 (Note: only first 6 will be displayed). + Added function to dump the screen (make screenshots) (real dump from LCD GRAM), but this function a little bit slow, takes around 13-15 sec (need transfer 320*240*2 bytes over UART). + modified French translation (still need to make translations for German, and Chinese.) + Added Russian Language + Font for menu was changed to Terminus + ENTER can be used to exit from menu.
Потенциально небезопасное приложение)) Устройства, которые имеют на борту Wi-Fi модуль должны связываться друг с другом напрямую (point-to-point). Как, например, видеорегистраторы или 3D-принтеры связываются с телефонами. Зачем ему нужен Wi-Fi роутер? Вы вводите пароль от роутера в неизвестное китайское приложение и позволяете ему делать всё, что угодно)))
Sign up at ELECTRONOOBS.io: electronoobs.io/
Follow me on FACEBOOK for more: facebook.com/Electronoobs
help me on Patreon: www.patreon.com/ELECTRONOOBS
Diy vape please
FYI, The Supply Case KIT S06A link is the same as the Riden RD6006 supply link
Out of all of the videos I've seen on this supply you've done well explaining how everything should work, especially the app!
15:25 Ahh classic magic smoke
You have a good eye!
@@ELECTRONOOBS I also watched that in a single frame
i just had to look back when i saw your comment.. NICE!
hahahaahahahahaah came to the comments just because of that!
I saw that and thought "did I just see magic smoke?" and watched it again a couple of times and died laughing! I dropped down here to make a comment and sadly you beat me to it by a year. LOL!
Nice Job! Keep up the good job bro! Keep safe, we're praying for you and whole Spain 🇪🇸. From Philippines
Thank you very much!!!
The Ground/Earth should be bonded directly to the Case with a Shake proof star washer and to the supply ground . Do not rely on the screws on the supply brick to ground the case as they are going through a painted surface .
You and Greatscott! talk almost the same way to my hear. I mistake you guys sometimes. I love you guys so much. you guys are doing a great job. I've learnt so much from you guys
I think they are of the same nationality
It's a nice product. phone and computer application is also very useful.
hello, I see that in your video description, it is Banggood link, they are not going to sell the RD series power supplies any more after clear their warehouse stock,if you like, you can use our RD aliexpress official store
Great video!! If you set you S-400 to a voltage above 61v, you power supply will be capable of the max 60v👍👍👍
I saw EEV blog do a video on this, and he was pleasently surprised.
The best. Short and full of informations I needed. Thanks.
This power supply has some really crazy features !!
So, it doesn't have dual polarity supply? Right?
At 2:58 are you sure that you labelled correct dimensions 😛 I mean it should be 40mm in height and 50mm in width !!😜 Even the best of us can make mistakes 😂. I love your videos and watch everything very carefully.🥰👍👍
LOL. You're right, I think those are backwards!
thank you for your review, if you have any questions, just contact us
I have a question, where is the PC Software gone? 🤷🏼♂️ Its missing in the Google Drive link that is provided in all instruction videos.
@@Utube2Itube do you click the wrong file link, you can try this three link to download the PC software:
A: Main download llink : drive.google.com/open?id=17V-JWHvqMF-NuWSznEiJ4RKrnn_Pkt5v
B: Mediafire:www.mediafire.com/folder/ssjf3s35ev68v/RD6006
C: Back up download link : www.ruidengkeji.com/rdupdate/software/RidenPower/RidenPowerSupply_V1.0.0.6.rar
This is my favorite channel keepup bro and hope Spain will come from this worse satuation soon we pray and take care your self
Wow :O Probably I'll be getting one of those in near future. By the way great video bro!
Nooo está buenísima, quiero una! Excelente review!
THAT IS TRICK. Thank you. Spain is in my prayers.
Great video!! I am already decided to buy the power supply...
Take your like good man, your video helped me meet and set up my Rd6006
I bought one too. But I am not happy to see it’s only disconnect one wire with the main switch.
I will replace this switch with a 4 wire switch. Here in Germany you can have live and neutral switched.
Nice video, you remind me a lot of the German youtuber great Scott
17:00 The drop in efficiency is at 4 amps, not at 5 amps. They are selling a set here with a 70V power supply, I guess the efficiency would be 1-2% lower than the 48V curve.
Tip: get a SMPS @ 55-60v so you get less power loss and hence heating which will shorten its lifespan.
Great and thorough tutorial!
Could you explain the output load of 15 ohms? The load that I see is 2 groups of 5 ohm resistors in parallel. (15 ohms /3) *2=10 ohms
The psu seemed like it's weak point, also it racked up the price quite a bit, so I used a good quality scavenged atx psu instead, with a $7 65v 400w boost converter, drilled a few extra holes in the casing, and I gotta say it works great, there's no significant ripple even when running at full power, and it's pretty much on point..
It's nothing like the real deal or nowhere near any linear supply, but for the price it's truly great
this whould have been awesome to use for a server power supply to power RC hobby battery chargers except for its very low amp rating. too bad. I need something capable of 70A or more to keep up with my Icharger 308duo and HP HSTNS-P11 power supply.
After entering the MENU, to go BACK or ESCAPE, press the Potentiometer Knob! I thought it would be good to mention here since it wasn't mentioned in the video, and I had to read the manual to find out how to get out :-P
Can you please link the tutorial for the mini power supply you showed at the 12 seconds? I am very interested in putting one together. Great video review 👍🏽
have you got it?
@@gratusrichard1644 na didn’t bother, went with some generic brand off Amazon instead
@@64hapz oh ok. Thanks for the reply bro
Hi sir,
Please can you suggest me about RIDEN RD6012.
Is it suitable for mobile servicing shop ?
can i use it for sort killer for mobile motherboard ?
please write me details .
I will be helpful .
with best regards ,
khan.
Amazing video as always
Hello. What's your opinion about the Miniware power supply vvls RIDEN. Thank you
Love your explanation sir
I feel like a BLE module might also work, and it would be interesting to see this connected via serial too
Very good video
Nice video awesome power supply
The relay is connected between the positive output post and the battery post.
Great tutorial! What is the latest firmware version?
I´ve ordered this psu from a seller on E-Bay 2 times, but I´ve never received it to this day... I got my money back, allright, but I just wanted that goddam´n powersupply... One of these days... ;)
hmm, maybe because of the virus thay have delays...
@@ELECTRONOOBS No, it was´nt cause of the virus. ...It was very strange. It was returned to the seller, he sent it again, and it came back. I got my money back, så I chose another seller. ...With the same result!!! ...So i put it on ice for a while... But I REALLY would like that PSU. :) ...Sometime in the future. ;)
@@Mumme666 is it a customs issue in your country? Perhaps PSUs lacking certain certifications are not allowed to be imported.
they really are a nice PSU for the Price!! I really thought i would have seen you do a review on this earlier.. its been out a good while now!! i dont remember anyone pointing out that it needs connects a router 1st before your phone(kinda obvious but something ya would over look) but its been a long time since iv seen a review on this one!! it really is worth the money but maybe a bit to complicated for my needs.. Now Why do you have a banana in your shot always??
Why complicated? banana 4 scale as always :)
@@ELECTRONOOBS maybe complicated was a bit harsh! but as a first PSU it wouldn't my choice!! it would(or might even be) be something i would build up to as i gain more knowledge. like a little gift to myself.. i think i might have asked about the banana before!!
¿Por qué no has hecho la review en español? ya existen muchas en inglés sobre este equipo.
Android app not available.
Could not find on play store.
iOS version works, but can not control device with iPad.
Can we add csv file for voltage and get custom voltage graph at the output
I have one. It's perfect.
It looks interesting!
Why do you have a banana always lying around on your workbench. By the way, I am really impressed by the quality of your videos and the depth you go into. You are 200times better then greatscot. Really bro, you are the inspiration for me to do engineering in electronics.
Thank you very much for all this good feedback :)
Its for size comparision
@@gamingSlasher Thanks for giving a reply after 3 years 🤣😂
@@fireracerworkshop8251 Suddenly it happens.
Thanx dude great video
The RDPower app needs to be updated for the current version of Android.
I have the rd6006p since today and I hear a faint high pitch sound when I turn on the voltage output. The sound becomes less when I increase the output voltage and from 35 volts the sound is gone. Do others have this too? Or is this a defect?
Is it possible to access the power supply from an internet browser if connected to wifi?
I have two notes. You can download the app for IOS as well (I have it). I like RD6006w. The only disadvantage is to be switching power supply not a linear one. For less than 200$ you can have high-quality linear lab supply (not soo powerful, but usually you will be fine with 20v 2-5A). I do not get why they put thermocouple inside when it is for outside use?!
Depends, for amp design I need 50V at 5A, that's useful.
what version of windows are you using to connect to the computer.
Guys did u notice the smoke at 15.26
That was the resistor bank heating up / LOAD
translate this video for Electronoobs Spain please, congratulations
Pff working on my own 24V 20A supply as we speak ;)
excellent
Got mine for 40USD on banggood. when they sell it low like that, does that mean we can expect a new model soon? I want one with 80-100V so I can use it for ebike and scooter charging. I did see in the changelog from the android app that support for "RD6012" was added. A 120V model maybe?
Damn, it's only a 12A version
I suggest that you look for a different kind of supply for higher voltages, rather than a lab/bench PSU. A purpose-built battery charging unit would likely be much more economical.
Can we use ESP-01 for connect this power supply to wifi?
The supplied wireless module is evidently based on an ESP-8266.
Did anybody see the cable burn at 15:26 ?
I came to the comments to ask this. Is it maybe solder smoke from the resistors?
What Happen on 15:28... burn Up something 😂😂😂
Does this have reverse polarity protection?
Why is it that you need to connect the USB to use it with the PC? Why can you not just use WIFI?
I heard, in another review, that the WIFI feature does not work for the PC and that makes ZERO sense to me. Does anyone know a logical reason for this?
Presumably this is a software implementation issue (i.e., the PC software is not mature). I would look to open-source alternatives for controlling this PSU. It's a popular series of PSUs so there is likely to be more development on the open source side than from the vendor as time goes on. Here's a github repo to check out for starters: github.com/rfinnie/rdserialtool
is there countries with 220v? it's long time since 220 became 230v but china still uses 220v on labels
What was the smoke @ 15:25 ?? 🤔
Edit: I should read comments before commenting myself! Sorry!
What is the purpose of the power controller and supply
The thing that I dislike is that I want to buy a PSU like this, but for it to run you need another PSU that supplies 60V to it first. Why can't I connect it directly to a normal 230V wall plug? Its kinda an awkard product, if you want to start out and don't have a PSU already.
What is the secret behind that banana
scale
15:27...I saw magic smoke
Please make use of Arduino, add CC & CV features
08:26 Front Panel Upside down ;)
True, I've later fliped it!
Where can I find the pc software ???
How copy program in stm32f1 in this product
The case has the wrong link it sends me to the Power sUpply unit.
i am taking server error when ı try to set wifi. Can you help me please
What you can this product with arduino
Three 15 ohm resistors in parallel is 5 ohms. Two of them in series is 10 ohms. You were calling it 15 ohms.
I don’t understand this video. Why didn’t they connect together the actual PSU and controller together? Why sell it in pieces?
In case that you already have a supply home, why buy another one? In this way the controller will be cheaper!
@@ELECTRONOOBS Ah that makes sense. I appreciate the response!
If anyone interested, you can find my custom firmware for RD6006.
If you have any ideas, wishes, what to change or add in to the firmware, or found bugs, just let me know.
www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/225/
monitor.net.ru/forum/threads/651114/page-6
15:25 I saw smoke
Pity that it doesn't have a virtual ground for negative voltage
Aren't the parts a bit expensive? it's almost a $80 PSU.
2nd banggood link is copy of first link, needs to be updated to point at case kit instead of front panel controller.
Thanks. Just updated the link!
15:24 I have seen smoke? lol
Has anyone gotten this to work with the IOS App?
Hm, no earth for the metal housing?
Yes there is. The supply has earth and is screwed in palce on the metal case, so they share earth.
@@ELECTRONOOBS Oh, yes, that should have been obvious. Thank you.
Very few people are watching...
Hello friend. I am worried by Spain CoVID 19 status. Please be careful and stay indoor and don't open any parcel without heat treating. Exposing to heat gun can kill all viruses.
That shit doesn't travel by mail bud it doesn't survive on surfaces for long.....
is true. situation is quite bad. I haven't left home for weeks now...
If you are spending almost 100$ then why don't you buy a supply from a reputable brand? You will have better resell value and wont kill your projects or burn your house down.
For comparison's sake, which "reputable brand" has comparable specifications and features for less than $100 USD? There are lots of bench PSUs for less, but I don't know how many of them are from "reputable" brands with any resale value to speak of. I'd be glad to buy a brand name PSU to match (for example) my oscilloscope, but there's no way it's coming in at that price point.
hmmm...Keysight is giving out oscilloscopes...
WiFi card is useless without an actual app or program that’s actually working without the virus warning. The app they have online doesn’t work well at all. The program for PCs has been taken down on all mirror sites.
😊👍👍👍
Best firmware for 6000 series is on EEVblog. Google *UniSoft RuiDeng Riden RD6006 DC power supply* for forum.
Below is the Change log. You can always return to stock firmware at anytime.
In case of any problems while update, keep pressed [ENTER] while power on device, to run device in BOOT mode.
RD60062_V1.32.x.bin - my custom firmware. (where x - is the build number (sub-version))
RD60062_V1.32.bin - original (stock) firmware.
If you want to return to stock firmware, recommend to set default setting
To do this: keep pressed button [0] while power on device.
---------
History:
---------
--- RD60062_V1.28.1.bin ---
* Initial version
* Optimized, get rid of HAL Libraries... switched to LL
--- RD60062_V1.28.2.bin ---
+ The menu was complete remade, now I can easy add new items.
+ [SHIFT] + [Left/Right] - switches the current layout (without save in settings)
(if need to set layout after power on, then can do it over settings menu, as before).
+ For 'layout 1', can be enabled/disabled items.
+ Added OPP (Over Power Protection).
+ [SHIFT] + [MEM] - used to setup OPP
+ OVP, OCP, OPP - now can be disabled by setting it to 0
+ When entering OVP, OCP, OPP, SHIFT button will be highlighted as well
(to visually distinguish input: V-SET from OVP, I-SET from OCP).
+ The RIGHT button now works as a Backspace when typing.
+ When turned on the internal fan (the one that is on the module itself), icon will be displayed.
--- RD60062_V1.28.3.bin ---
+ Added setting for current cutoff in battery charger mode.
+ Added setting for batt temp. cutoff in battery charger mode.
+ Added Battery Charger Layout
+ Added Setting to skip keypad lock when connect with software.
+ [MEM] + [.] - now used to reset Wh, Ah
--- RD60062_V1.32.1.bin ---
* Updated to version V1.32
* Bug fixes
--- RD60062_V1.32.2.bin ---
* Bug fixes
+ Option "Digits Style", can select style for large digits (32x64, 12x24, 7-Seg)
+ Decreased minimum battery voltage from 900mV to 300mV
--- RD60062_V1.32.3.bin ---
+ Support WIFI
* Bug fixes
--- RD60062_V1.32.4.bin ---
* Fix TTL Interface
--- RD60062_V1.32.5.bin ---
+ Option "SkipExitIVSet" (prevents exit from edit mode for V-SET and I-SET when press ON/OFF button).
* Bug fixes
--- RD60062_V1.32.6.bin ---
+ Option "Standby LED" (Setup the behavior of the power button LED in power off mode (Default-pulsating, 0%-off, etc...).
(in modes 0% and 100% power consumption will be less (cause no need software generate PWM and can switch MCU in to the sleep mode)
* Bug fixes
--- RD60062_V1.32.7.bin ---
+ In power Off mode now using hardware PWM (except pulsating mode) for Power LED and turning off unnecessary peripherals,
to decrease power consumption.
+ Remade function to enter values.
* Bug fixes
--- RD60062_V1.32.8.bin ---
+ Option "Save Mult." to save current multiplier (for current session only, reset after restart)
* Increased minimum battery voltage from 300mV to 500mV (Due to some instability)
* Bug fixes
--- RD60062_V1.32.9.bin ---
+ Added option "Power State" (Power On, Power Off, LastState). Sets the state after power on (without a battery, LastState will not remember the last state).
+ Added option "Power Switch" to turn On/Off the primary PSU. (5V standby power supply required). (Note: Adds a 3 second power-on delay).
The control output is routed to the PA14 port (pin 4 of the J2 connector). High level - turn on, floating or low level - turn off.
Note: the maximum load on the port is 20mA !!! (it is better to use an optocoupler).
+ Added option "AutoPowerOff" to automatically turn off after a specified time if the output is disabled.
+ Added option Home:"Status Info" allows you to choose which parameter to display in the status bar (if you need something else, let me know).
+ Added option Home:"Mem Hint" If enabled, then pressing any number key will display a hint with the current settings in the corresponding memory cell for 1 sec,
a second click during this time will apply these settings.
+ added new parameter "7-Seg v2" to option "Digits Style", where "input", "vset", etc. will also be 7-segment.
+ Added display of the system temperature to the caption.
+ Minor improvements
--- RD60062_V1.32.10.bin ---
+ Added option "Screensaver" to decrease brightness (ScrsaverBright) after specified time. (Note: "ScrsaverBright" must be less or equal to "Backlight")
Press any key (except ON/OFF) will turn on backlight and restart timer.
+ Added option "ScrsaverBright" Screensaver Brightness (0-complete turn off backlight, 1-equal to "Backlight"=0, 2-equal to "Backlight"=1, etc)
+ Added option "ScrsaverActive" Allow activate screensaver if output is in active state.
+ Removed meaningless icons from the caption.
+ [Left/Right] - switches the current layout (without save) (no need press SHIFT anymore)
- Removed Layout 2 (Layout 3 already shows all values).
+ Minor improvements
--- RD60062_V1.32.11.bin ---
+ When edit "ScrsaverBright" or "Standby LED" now you can see the real effect...
+ Added option "Comm Buzzer" make a sound when the software writes new parameter(s).
+ Option "Mem Hint" now can select the time how long show the message (2, 3, 5 sec)
+ Added option "ShiftMemTable" Press SHIFT to display the table with settings for all memory slots.
+ Added new menu group "- Colors -", now you can choose what color (one of 15) to use for the next parameters:
Voltage, Current, Power, Input, V-Set, I-Set, OVP, OCP, OPP, Ah, Wh, Temp, BattVoltage, BattInfo (Layout 2).
Option "Custom Color" allow to use selected colors (using this option you can enable/disable custom colors in bulk).
Option "Test" is just temporary option and will be removed in next release,
can be used to see any color and its hex value.
List of colors need be adjusted, if you have any ideas just let me know (tell me hex values).
Here is the current list of colors:
const uint16_t g_colors[16] = {
0, // 0 - Default
C_RED, // 1 = 0xF800
C_GREEN, // 2 = 0x07E0
C_BLUE, // 3 = 0x001F
C_WHITE, // 4 = 0xFFFF
C_YELLOW, // 5 = 0xFFE0
C_MAGENTA, // 6 = 0xF81F
C_CYAN, // 7 = 0x07FF
//
C_LIGHT_BLUE, // 8 = 0x01CF
C_GRAY, // 9 = 0x8410
C_BROWN, // 10 = 0xA145
C_ORANGE, // 11 = 0xFD20
C_OLIVE, // 12 = 0x8400
C_TEAL, // 13 = 0x0410
C_PINK, // 14 = 0xFDF9
C_MAROON // 15 = 0x8000
};
--- RD60062_V1.32.12.bin ---
* Bug fixes
+ Some Improvements
+ New option "Max Power" to limit the power of primary PSU. (came from RD6018).
+ Fixed Layout 4
+ Added more options for Layout 1 (Note: only first 6 will be displayed).
+ Added function to dump the screen (make screenshots) (real dump from LCD GRAM),
but this function a little bit slow, takes around 13-15 sec (need transfer 320*240*2 bytes over UART).
+ modified French translation (still need to make translations for German, and Chinese.)
+ Added Russian Language
+ Font for menu was changed to Terminus
+ ENTER can be used to exit from menu.
I want it 🙄
This power supplier make diy use Arduino
It sounds like you record your audio in a bathroom
35 euros for the case!!!
Don't you think its a bit too much?
i don't think so. is a full kit.
Goofed up at 8.26 ......... inserted the panel the wrong way...... "upside down"
Потенциально небезопасное приложение))
Устройства, которые имеют на борту Wi-Fi модуль должны связываться друг с другом напрямую (point-to-point). Как, например, видеорегистраторы или 3D-принтеры связываются с телефонами.
Зачем ему нужен Wi-Fi роутер? Вы вводите пароль от роутера в неизвестное китайское приложение и позволяете ему делать всё, что угодно)))