Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject . So blessed You are doing a great job sir ! Respect
Please explain the problem sir....a line AB of 70 mm long has its end A at 10 mm above HP and 15 mm infront of VP . it's FV and TV measures 50 and 60 mm along respectively.draw the projections of line and determine inclination with HP and VP..even I think this is also an important problem useful for the students like us
Sir please give answer for this question A straight line PQ has its end is 20mm above HP and 30 in front of VP. And the end Q is 80mm above the HP and 70mm in front of VP.If the n projector are 60mm a part.Draw the projection of the line and determine its true length and true inclination with reference plane
line AB is in the first quadrant. its ends a and b are 20 mm and 60mm in front of the v.p respectively. the distance between end projection is 75 mm. the line in inclined at 30 degrees to the H.P. and its H.P is 10 mm behind V.P. draw the projection of AB and determine its true length and inclination with V.P. also locate the V.P? i want this problem sir.....
A 40 mm long line AB is positioned in such a way that it is perpendicular to VP and the end B is 10 mm in front of VP and 30 mm above HP. Draw its projections, keeping the line in 1st quadrant. can you please answer this question?
Actually the question is like " A line PQ is inclined at 30° to HP and its top view is inclined at 30°to XY line.The front view of the line is 60mm long .The point P is 30mm from both HP and VP.Draw its projection. Please tell me how to solve.just tell me Sir how to solve this.Thank you
Sir I have one doubt since it is mentioned as the line lies entirely in the first quadrant shouldn't the lines be drawn upwards instead of drawing it downwards???Pls reply🙏🙏🙏🙏
Hi Nisha.... Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
sir plz help in solving this problem the end projectors of line AB are 22mm apart from each other A is 12mm in front of VP and 12 mm above the HP. point B is in front of VP and 40 mm above the HP.locate the HT&VT of line also determine inclination with HP&VP
hey manas, in lecture 02 problem 02 you took front view length =65 as a'b' and now you took the length when we place it parallel to vertical plane, can you please clarify whats the problem
Hi Jainam....Refer to this link for this same problem: ua-cam.com/video/pRIjdbub2GY/v-deo.html And do watch videos for Projection of Lines from this new playlist: ua-cam.com/play/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu.html Complete Engineering Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
i think in the question the length of final front view and top view was given. if its like that then how will u solve the same question. plz do reply upon this query
Sir...we have been given front view and top view in question itself..so why we put arc in last step instead of measuring it and draw it on the locus line
Tqusir for teaching is nice in general method of construction like parabola, ellipse while explaining the projection of lines in computer I need explain in hand written can u sir I could not understand
Kunal.......Thanks for appreciating my work.... All the best in life And do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
what do we mean by hc and dc?? why did u change from da to dc?? btw i am familair with projection of points but my teacher taught giving different name to the elevation points and plan points
hc is the distance of point C from HP where as dc is the distance of point C from VP In drawing i had used a and b instead of c & d...So dont get confused...Amey...watch this video on a PC... Okay i had rectified that error....in the form of an annotation... Just watch that on a PC and you will gauge what i am trying to say.....
Type arc - enter c - enter select a point anywhere on screen as center then select a start point of the arc and move anticlockwise for the finishing point........ Hope this helps u Faizan........... All the best man......
Thanks for appreciating my work. Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html 2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html 3. Projection of Line: OLD: ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html NEW: ua-cam.com/video/pzE0D-Ijxd4/v-deo.html 4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html 5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html 6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html 7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html 8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html 9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html 10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html 11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html 12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html 13. Involute: ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html 14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html 15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html 2. Friction: ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html 3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html 4. Trusses: ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html 5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html 6. Moment of Inertia: ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html 7. Dynamics: ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Hey Shiva.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
Hi George.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
the way u teach is great and terrific. but pls also mention the logic behind the steps followed. how did the thought came into mind?
Yeah ....... U r right....
Watch previous videos
watch concept video , think by yourself
My favourite UA-cam teacher Manas sir tq very much,,
Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject .
So blessed
You are doing a great job sir !
Respect
sir you are god of ed......this is the perfect way of teaching.....and whole world wants this
Engineering Drawing | Engineering Graphics |: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
In your previous lecture Level 2 Problem 2 you took FVL=65mm as a'b', in this lecture you took you took FVL as a'b2' =72 . Please clarify
yaa even i am confused for that
you have helped so many core students
really thanks a lot
Please explain the problem sir....a line AB of 70 mm long has its end A at 10 mm above HP and 15 mm infront of VP . it's FV and TV measures 50 and 60 mm along respectively.draw the projections of line and determine inclination with HP and VP..even I think this is also an important problem useful for the students like us
thank you very much sir... u explained it very well...👍
and watching it step by step truly helps.. thanks again sir..😊
Thanks Prantik for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...
Manas Patnaik yes sir.. i have already shared the link...👌👌👍
It's Best channel to learn engineering drawing and engineering mechanics .. Thanx sir 😊
Thank you so much sir
Aapne mere lines ke baare me sab doubts clear Kar diye
Thank you thank you sooooo much
But sir mujhe projection of solids me abhi bhi pata nahi chal raha so plz sir Kya aap hindi me projections of solids ke video bana sakte Hain ?
Tq sir.... Your lectures are never old!!!❤
you are like a god for us. as u know the way of teaching in collage..
Sir please give answer for this question
A straight line PQ has its end is 20mm above HP and 30 in front of VP. And the end Q is 80mm above the HP and 70mm in front of VP.If the n projector are 60mm a part.Draw the projection of the line and determine its true length and true inclination with reference plane
What about the line being fully in first quadrant, explain please.
line AB is in the first quadrant. its ends a and b are 20 mm and 60mm in front of the v.p respectively. the distance between end projection is 75 mm. the line in inclined at 30 degrees to the H.P. and its H.P is 10 mm behind V.P. draw the projection of AB and determine its true length and inclination with V.P. also locate the V.P? i want this problem sir.....
Amazing content, you are 100 times better than my IIT Bombay Professor 😇
Thank you very much sir for your great explanation in short period
Thank you sir you solved my doubt and better than on board teaching
A 40 mm long line AB is positioned in such a way that it is perpendicular to VP and the end B is 10 mm in front of VP and 30 mm above HP. Draw its projections, keeping the line in 1st quadrant. can you please answer this question?
Plzzz reply to my doubt sir
Instead of taking arc of a'b2' cant we make a line from a' of lenght 72 which intersects at locus of b1'
U explaining skills is excellent👏👏👏
Actually the question is like " A line PQ is inclined at 30° to HP and its top view is inclined at 30°to XY line.The front view of the line is 60mm long .The point P is 30mm from both HP and VP.Draw its projection. Please tell me how to solve.just tell me Sir how to solve this.Thank you
Sir I have one doubt since it is mentioned as the line lies entirely in the first quadrant shouldn't the lines be drawn upwards instead of drawing it downwards???Pls reply🙏🙏🙏🙏
Why do you take FVL horizontally?Same for TVL.
TVL and FVL are the lengths of final view length?
Tq so so much sir.....
U made my semester much better...
Luv u sir
In the question they have given pts c and D but u have taken your own pts b2' and all can we do tat in xam
What to do in this same problem if they give assume point c at suitable distance from the RPs
Can we take any distance
thankyou very much sir ..it's going to work a lot
Hi Nisha....
Thanks for your appreciation...
All the best....
And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....
thanks
Superior explanation and well description of all views
How about when the point D is in the 3rd quadrant
sir plz help in solving this problem
the end projectors of line AB are 22mm apart from each other A is 12mm in front of VP and 12 mm above the HP. point B is in front of VP and 40 mm above the HP.locate the HT&VT of line also determine inclination with HP&VP
hey manas, in lecture 02 problem 02 you took front view length =65 as a'b' and now you took the length when we place it parallel to vertical plane, can you please clarify whats the problem
Hi Jainam....Refer to this link for this same problem: ua-cam.com/video/pRIjdbub2GY/v-deo.html
And do watch videos for Projection of Lines from this new playlist: ua-cam.com/play/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu.html
Complete Engineering Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
i think in the question the length of final front view and top view was given. if its like that then how will u solve the same question. plz do reply upon this query
Sir...we have been given front view and top view in question itself..so why we put arc in last step instead of measuring it and draw it on the locus line
distance between the end of projection is 40 mm an true lenth is 80mm ??? what is it meaning???
Tqusir for teaching is nice in general method of construction like parabola, ellipse while explaining the projection of lines in computer I need explain in hand written can u sir I could not understand
Thank you manas sir..☺
+Vivek K
Thanks vivek....😀
Sir y we need to rake the horizontal distances
Is this the angles mandatory to represent sir?
Sir how many models we have in the projection of lines
Nice explaination sir
ty bro it helps and ur explaining it very that fits in mind directly .....
Kunal.......Thanks for appreciating my work....
All the best in life
And do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
sir.. it was too useful for me.... thanks a lot
whats the logic behind drawing locus lines and the way u proceed?
Raghav Gupta
watch the lecture on projection of lines reloaded.....
You will understand the reason behidnd making locus lines.....
sir u had exrended fv (72) to downwards and tv (65) to upwards but if do this in reversible way there will be any wrong in the answer
George.....
The method that i had adopted is perfect and the answer is also right...
Go ahead and dont worry
sir how to proceed with the pblm where Alpha and beta given and TL is given How to find front view length and top view length
Thanks sir
why did we draw a'b' and ab
If u explain about angles then it will be helpful sir pls reply .......... please.................
Sir here we tke notations smll c,d or a,b??
Sir I am getting theta = 50 degrees how ?
what do we mean by hc and dc?? why did u change from da to dc?? btw i am familair with projection of points but my teacher taught giving different name to the elevation points and plan points
hc is the distance of point C from HP where as dc is the distance of point C from VP
In drawing i had used a and b instead of c & d...So dont get confused...Amey...watch this video on a PC...
Okay i had rectified that error....in the form of an annotation...
Just watch that on a PC and you will gauge what i am trying to say.....
Very nice question sir
Sir How to find traces??
Should angles be same for every one sir
Watch the introductory video on projection of lines
All the best.
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Tq so much sir..... For giving neat explanation
Sir can u plz explain the midpoint questions
All the best
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Sir some time my drawing angle . Doesn'tmatch your drawing angle so it will go in exam. 2°-3° in drawing paper
Its ok Rohit.....
Thats human error......
Chill
GREAT WORK BRO!
How to ans the angles of alpha &beta ...
Very helpful videos sir.
Thank you sir manais you have been very helpful
Enjoy the videos and all the best
thankyou for this vedio
you have done a great job 👍
How to install AutoCAD 2008 in pc sir
3:12 pr apne ise b2' kyo man liya ...ye final front view length h Na....to ye to b' hogi
jab tak usko rotate nahi karte tab tak use technically final front view nahi keh sakte...
You can refer to that as just front view length..
Manas Patnaik ok thanku so much sir.....your explanation is really too good👌👌>>
Thanks sir
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Best helpful sir
Sir how do you rotate arc 6:06 in autocad.
Type arc - enter
c - enter
select a point anywhere on screen as center
then select a start point of the arc and move anticlockwise for the finishing point........
Hope this helps u Faizan...........
All the best man......
Tq sirr..😊😊😊
It's helps alot fr me
Hi Narayan....
Keep learning and do let your friends know about this channel so that they can also benefit...
All the best....
THANK YOU VERY MUCH SIR . YOUR VIDEOS ARE GREAT. :)
Super sir ,fascinating.
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
How can i draw projection if the line is lying on 2 quadrant
Harsha Pathu it is applicable only for 1st quadrant
Really helpful
Thank you
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Very nice sir super teach wowwwsemmmssaaa
Thanks
Thanku sir very nice lecture
Thank you so much sir🌷
Nice sir but say the logic behind
What is plan length...??
Plan is a civil engineering term.
It means top view. Hence plan length is top view length.
Also keep in mind that elevation means Front view.
So top view length is plan length and front view length is elevation length
Exactly
Thank you sir....
Helix curves please upload it
Will do it soon Varshil
I have my exam today 😀
Thank you sir
Sir thank you very much
All the best bhagat.....
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Engineering Drawing/Graphics (Hindi): ua-cam.com/video/SB83cUaAiCM/v-deo.html
3. Engineering Mechanics / Applied Mechanics: ua-cam.com/video/Z4WN2Z9okfs/v-deo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
5. Theory of Machines: ua-cam.com/video/Co4YlavCpeQ/v-deo.html
6. Machine Drawing: ua-cam.com/video/iFCnFUR9Gdc/v-deo.html
7. Engineering Drawing for Engineering Services Prelims: ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: ua-cam.com/video/0fejUC79LZY/v-deo.html
9. Manas Speaks Series: ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Tq for ur video
Hey Shiva.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Thank you sm sir 😊
thankzz sir
Hi George.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
amazing
thanks a lot
Thanku sir😊🙏
so interesting
Tysm❤
Thank u ....Keep learning and do share it with your friends.........aLL the best
you teaching is no nice sir
Hey you teach good but please loose that FAKE ACCENT man
Sir here we tke notations smll c,d or a,b??
thank you sir
Thankyou sir