@@iustinian1337 You might be surprised, but AR-15 isn't the name of a specific rifle. It's the name of a system of rifles based on the Colt AR-15 design. The M4A1 is part of this system
most notable on the end plate of the pistol grip (dont know what its called, im from EU and guns are like fairy's to us dont hate) both have the exact same mechanism from what i can see and the m4 gets a gentle push down and the ak got a whack with the hammer.
@@The_Velocibadger it’s a pretty large and conveniently shaped piece of tape for a couple pinholes at the front, also there are no pinholes on the side of the mag well there
@@SavHavoc The safety/selector looks more like the one you can find on adar 2-15s, which would make sense, also i'm not certain if cq-as are getting exported to Russia. edit: It's a BTS-15
From my experience in owning both AK and AR platforms. AR is like legos, snaps together neatly. AK is like arts and crafts, may require modification or persuasion with a blunt object to install
@@stenanderson8342 ну, например, все, что на ласточкин хвост крепится, ставится сразу без подручных инструментов. Цевьё поменять голыми руками сложнее, но тоже можно.
И снова удовольствие для глаз и ушей, прикольная сборка получалась, теперь надо увидеть сборку дикого, как он укорачивает ствол ножовкой и где нибудь крутит синюю изоленту)
I've never even played EFT, just watched some streams, but I appreciate that they didn't just use generic "clickity-clack" noises for weapon manipulations. If you've used both M4s and AKs, you know that they make different noises when the bolt racks, mags come in and out, safety moves, etc.
I just love the fact that they where much more delicate with the component compared to the AK video. In the AK video he hammered down the Scope clamp, but here pressing down is enough.
this just shows the love these people have for guns. now imagine if you would need to do this ingame and actually learn to how to put those guns and attachments together to build your own gun ingame.
It's easy. Just screw the MLOK nut all the way in before installing. Then when you have the accessory lined up with the rail, turn the screw half a turn counterclockwise or until the MLOK nut is fully perpendicular with the MLOK cutout. Then torque screw to spec.
tried to mimic this ingame and got pretty close. Mostly missing the stock, the mount for the flashlight, the riser for the sight and the suppressor. build is not half bad.
If my knowledge is accurate, I feel that according to UA-cam's terms of service, it is not allowed to take movies of the stock being attached and removed from an M4 rifle.
That guy got what he asked for
I did!
And the video isn't 20 minutes long
That’s what I was gonna say! Haha, I sure did see that🤣
Yea
I saw that comment LOL
that guy from previous video must be happy in his live
You bet I am!
@@cagneybillingsley2165 its an AR-15, not a M4A1
@@cagneybillingsley2165 told a joke and made yourself laugh. it must have sounded clever in your head
@@iustinian1337 You might be surprised, but AR-15 isn't the name of a specific rifle. It's the name of a system of rifles based on the Colt AR-15 design. The M4A1 is part of this system
@@iustinian1337nope, it's the standard M16 short version. Also looks like it's thickened barrel (like in M4).
AK: *Uses hammer to shove cap on pistol grip*
AR: *Uses tweezers to carefully put screws in*
now we need scav asmr
Just a dude removing the dust cover and stock from an AKSU and leaving it as is
Disassembling a scav might be against tos
@@Renay90 Thats exactly what i was going to answer haha 😂
@@Renay90 or just him hiding in goshan tearing through canned food and drinks with occasional gunfire in the background
I can see a Scav modding an SKS
I liked the depiction of violence in AK ASMR with using a hammer and depiction of being chill in this one.
same as with the guy wearing white gloves like he's some sort of museum worker, not mechanix
@NotEpoxyResin nice point. didn't noticed that one.
most notable on the end plate of the pistol grip (dont know what its called, im from EU and guns are like fairy's to us dont hate) both have the exact same mechanism from what i can see and the m4 gets a gentle push down and the ak got a whack with the hammer.
@@jpb13 That's called the snack retention plate, it helps to ensure your Skittles and/or M&Ms are secure and don't fall out of the grip.
We will remember Dugan
Didn't know mechanic had a UA-cam channel
chads .02 seconds after unlocking flea
Most chads buy parts from traders to save money.
love how the AK vod was beaten to death while the m4 was majestically put together. Real culture vibes
ak more healthy than m4
The tape on the lower receiver as to not show if it’s actually a colt rifle owned by the US gov is the golden touch
It’s not, pin holes
@@The_Velocibadger it’s a pretty large and conveniently shaped piece of tape for a couple pinholes at the front, also there are no pinholes on the side of the mag well there
This is the Chinese CQ-A
@@SavHavoc The safety/selector looks more like the one you can find on adar 2-15s, which would make sense, also i'm not certain if cq-as are getting exported to Russia.
edit: It's a BTS-15
@@jakubkomala The selector can be easily replaced with another one. CQ-A were exported to Russia. I have one.
Я ожидал абсолютно чего угодно, но АСМР от Таркова это 💀
Дайте ещё
Finally someone did the whole ASMR thing right
aleks! how does it feel to still be goated?
В калаше всё били руками стучали молотком, а тут тихо и аккуратно
From my experience in owning both AK and AR platforms. AR is like legos, snaps together neatly. AK is like arts and crafts, may require modification or persuasion with a blunt object to install
Ну как говорится, "Без молотка и чей-то матери, фиг что сделаешь"
Разбирал калаш и ставил модули голыми руками в боевых в том числе условиях, а тут пока разберешь прибьют уже
@@Alikfox27какие модули например?
@@stenanderson8342 ну, например, все, что на ласточкин хвост крепится, ставится сразу без подручных инструментов. Цевьё поменять голыми руками сложнее, но тоже можно.
ah yes the duality of man
И снова удовольствие для глаз и ушей, прикольная сборка получалась, теперь надо увидеть сборку дикого, как он укорачивает ствол ножовкой и где нибудь крутит синюю изоленту)
they can do a double barrelled shotgun for that one
@TroubleTwo один из самых подходящих вариантов, ещё отлично подойдёт легендарный ТОЗ 6
This was so much gentler then the AK vid
Because its more expansive than AK.
@@kotenara10 depends which ak you're buying
@@kotenara10it's because you don't need to beat the parts out of place like the AK.
Bs the ak is the way
AK is overrated to be honest@@Solidcambo
We need more! That's awesome video series!
crush washer with a suppressor is a bold move
Now we need the scav where he takes apart a gun that's already half taken apart.
I have learned more about guns from Battlestate than most guntubers lol
You are 7 years old is why
@@TheOriginalShoneBoyOnYT ??
@@TheOriginalShoneBoyOnYT If you're going to insult someone, at least know proper grammar.
It’s because half of their content is just ads lol
@@BullsMahunnyis this a pre-generated comment?
I've never even played EFT, just watched some streams, but I appreciate that they didn't just use generic "clickity-clack" noises for weapon manipulations. If you've used both M4s and AKs, you know that they make different noises when the bolt racks, mags come in and out, safety moves, etc.
it would be pretty cool series if they could do every gunsmith task in this format
obviously superior ASMR for the AK. as always, AK comes out on top.
это слишком хорошо. пожалуйста, продолжайте
GOOD! My sleep quality is as wonderful as 'chest, left armpit, head, throat' combined!
If I am not mistaken the base rifle is a BTS-15 by German/Hungarian manufacturer Bavarian Tactical Systems.
Satisfying AF, thank you Battlestate!
Yup, front sight base taper pins are definitely that easy to remove.
this is now by far my favorite content on youtube
Rose gold “eotech”😊😂😂
Was that a fake EOtech?
looks very sus for sure. i never seen a real rosegold eotech, but fakes yes. i hope its just the lighting
@somethingtorelate its either fake or really old. EOtech doesnt put "For military and law enforcement use" on their sights anymore.
It's a fake I've seen em in person
you know you've been in Tarkov for a while when you can correctly name the parts
Or just own AR-15's in the RL
@TheSundayShooter yup, I live in a country with no private gun ownership, but got enough training to recall them so there's that
Попытки "В звук" не прекращаются ...
Теперь нужен тозик для диких
Finally,some good ASMR
WTF??? New EOtech color??? Rose Gold???
Its a fake eotech
FDE
@@jacketfullofmetal that's the joke
hope so tbh
fake eotech from aliexpress, they are all in that rose gold color
Shturmans svds next ?
Weapon disassembling ASMR-style hits. 10/10.
I love how AK guy was using a hammer and this guy is as gentle as possible
Your PMC does all this in 1 second. Total chads.
AAHHH the beauty of customizing your weapons
I just love the fact that they where much more delicate with the component compared to the AK video. In the AK video he hammered down the Scope clamp, but here pressing down is enough.
Сделайте видос со звуком падающей гранаты, хоть где то он будет❤😂
テセウスのM4、凄く好き
Лучший асмр контент на Ютубе лично от Буянова
Норинка в обвесе с Алиэкспресс, то что мы заслужили
i like how the tools for the job changes. ak vs m4
nice touch
That one guy's request has been fulfilled.
Балдёёёёёж, только что такую красотку в ContractWars разглядывал)))
MP5 NEXT MP5 NEXT MP5 NEXT!
this just shows the love these people have for guns. now imagine if you would need to do this ingame and actually learn to how to put those guns and attachments together to build your own gun ingame.
Gun Building Simulator 2025
1:30 If only tightening down those m-lok lugs was this quick and easy.....
It's easy. Just screw the MLOK nut all the way in before installing. Then when you have the accessory lined up with the rail, turn the screw half a turn counterclockwise or until the MLOK nut is fully perpendicular with the MLOK cutout. Then torque screw to spec.
Skill issue
@@Threat_LvL you say that but they aren't even locking the lug into the handguard in the video so....
I like to think this is what mechanic falls asleep listening to
Glad to see I wasn't the only one thinking about that guy getting his wish 😂
Cool videos doing the ASMR stuff. I wish you guys got some non airsoft optics and lasers though
SVD next 🤔
genuinely good disassembly video
Walks out of hideout after all that, gets “(Head, eyes)” almost immediately.
Мда... АСМР определëнно лучше, чем оптимизация...
получил эстетическое голова-глаза)))
I love that these are used and dirty guns. caked on oil and tons of scuffs and scratches.
What's the purpose of the little spring in the right hand pistol grip?
It's the safety detent spring, it basically puts pressure in the safety so it locks into its 2 or 3 separate positions.
MP5 next, please! ❤
Настоящий СБЭУ комар на отдыхе.
Cool vid. Would you guys fix the FPS issue on 0.16 patch now?
Nice. Always enhance your NAFO trophys, kids! 😀
I can't imagine how a PKM would be 😂
"THAT'S NOT HOW IT COMES OUT" - Zach Hazard
crusty rifle, very realistic, I approve
I wonder what parts were used with this M4. I gotta try it out!
Удовольствие
Lies and deception, no third hole, no M4
I love this and i wish maybe us can bring more like this plsss :3
Scav shotgun next?
0:40 какие то ключи как специальные нужны
"Let's see Paul Allen's M4A1."
Я кайфанул, давайте ещё 😢
it's all fun and games until Mechanic asks you to build something for him
Sadly not an actual M4, but we certainly appreciate it
for reall love this kind off content
Good work, Mechanic
AK - hammer and old gloves
M4 - gently moves and white gloves
XD
Another one :D Love it!
I like how they built this M4 with glove and relative care but they used a hammer for the AK lmao
ah yes, the superior platform.
Круто, но что насчет оптимизации?
I saw that mlok insert spinning when you went to install the light. We feel your pain.
Can someone put this on a 10 hour loop so I can sleep to it 😊
Let's be more exotic. The FAL ASMR
I must confess, I don’t think I’ve ever seen anyone remove the bolt retaining pin with a hook before. Always done it and seen it done by hand
"One day, my Son, you will see Tarkov collaboration with Girls Frontline, one day......"
tried to mimic this ingame and got pretty close. Mostly missing the stock, the mount for the flashlight, the riser for the sight and the suppressor. build is not half bad.
No Loctite or toque wrench assembly? Good to go.
Very much appreciated.
Why would you tape the markings? It's pretty clear that it is Norinco CQ-A
Те самые 3 часа в инвентаре перед рейдом
50 shades of "dark earth"
Изучаем, изучаем, с текущей политикой пригодятся через пару лет эти знания
If my knowledge is accurate, I feel that according to UA-cam's terms of service, it is not allowed to take movies of the stock being attached and removed from an M4 rifle.
Сделайте асмр ПЕВКА пожалуйста
atleast they listened to the community