Replacing Jaguar V8 Secondary Timing Chain Tensioners

Поділитися
Вставка
  • Опубліковано 4 жов 2024
  • If you own a Jaguar with the first generation of their V8 it is very important to make sure your secondary timing chain tensioners are replaced. If yours are still the original ones, here is how to replace them.
    Buy Living with a Classic Merchandise: teespring.com/...
    Follow the projects on Instagram: / living_with_a_classic
    Support the channel: / livingwithaclassic
    Business contact: livingwithaclassic@gmail.com
    #jaguar #xjr #timingchain

КОМЕНТАРІ • 23

  • @richardgreene3460
    @richardgreene3460 4 місяці тому +2

    A+++ video! Sadly, Jaguar went from a "bullet-proof" engine in the 95-97 XJ6 to this in 1998 (USA)!

  • @williamendres1265
    @williamendres1265 4 місяці тому +1

    Great camera view, thanks for the video!

  • @RudolfMare
    @RudolfMare Місяць тому

    Thanks for the very informative video! Have you done maintenance on the S type R? Thanks for sharing your knowledge!

  • @alexandrecouture2462
    @alexandrecouture2462 4 місяці тому

    I took a small vacation with my XJ40 around 2000km and all went fine, except for one big big problem: I hit a deer on the highway, at 100km/h. It was 11h00am monday. It had made a "poof" sound and then the front right of the car is destroyed, with a lot of ketchup everywhere. I was still 3 hours of road away from home and after a quick inspection, I went back home. i have already bought the parts to rebuild it, but it'll take some time... A bonnet, a fender, a light, flashers, corner of the bumper. Not a great week after that sadly... But, if I was in a small economy car, it could have gone very bad for me.

  • @jeffharrison5265
    @jeffharrison5265 4 місяці тому

    Great work Adam. You should put one of those engines in your S type. How cool would that be!

  • @michelswerissen6544
    @michelswerissen6544 4 місяці тому

    Video approved good work, click.

  • @uhn100
    @uhn100 4 місяці тому

    Another informative video Adam thanks for sharing this with us best regards Andy Allen.

  • @pieterkatsman9790
    @pieterkatsman9790 4 місяці тому +2

    Normally the tensioner upgrade requires 32 new parts because the lower tensioners are most of the time just as bad. They sell very good upgrade parts and you replace everything on the way because it will crack if you remove it or when you put it back together. We do it weekly.

  • @EssexSilvering
    @EssexSilvering 27 днів тому

    I have a 2001 model, not checked the tensioners yet, it has 140,000 miles on the clock, sometimes I get a clanging niose (coming from one side at the bottom some where) on first start up for in the morning for about 2 secs, but this doesn't happen all the time, most mornings it doesn't make the clanging noise, not sure what it is, do you have any idea? ... As mine is a later model, it should have the metal tensioners anyway. My engine sounds really quite once started, like a new engine.

  • @parrotraiser6541
    @parrotraiser6541 4 місяці тому +1

    If you want to exert force on an aluminum component, might a piece of wood be a suitable tool?

    • @LivingWithAClassic
      @LivingWithAClassic  4 місяці тому +1

      If you’re careful you won’t make a mark. It was very light force and it didn’t leave a mark

  • @SylviaSealey-ng9wm
    @SylviaSealey-ng9wm 4 місяці тому

    Hi Adam
    Do you recommend changing the filter in the gearbox on these xk8 or xkrs
    Love the channel keep it up
    Thanks

  • @woody5773
    @woody5773 4 місяці тому

    Hi thanks for the nice video. Do you have or make a video to check and adjust the valve clearance of a xjs v12. Thanks

    • @LivingWithAClassic
      @LivingWithAClassic  3 місяці тому +1

      Sorry I do not but as soon as I have that job come up I promise to film it

  • @Dargam.
    @Dargam. 2 місяці тому

    Adam is there a way to remove the cams without removing the front cover. I have the timing tools. I need to replace the valve stem seals on the same engine using air or rope method.

  • @shauntvr4312
    @shauntvr4312 4 місяці тому

    Hi I love your videos are you going to do a video on the tvr griffith

  • @johndavey72
    @johndavey72 4 місяці тому

    In Adam we trust ........❤

  • @russellwhite7407
    @russellwhite7407 4 місяці тому

    👍🇦🇺

  • @FunWithCars716
    @FunWithCars716 4 місяці тому

    Adam is that the Buick based V8 that Rover originally ran?

  • @alexandrecouture2462
    @alexandrecouture2462 4 місяці тому

    The chains were so much stronger on an AJ6. Sad to see the Ford-ification of some important engine parts.

    • @alext6257
      @alext6257 4 місяці тому

      One of many issues, plastic thermostat housing but worst of all Nikasil cylinder lining, rear wheel hubs failing is another.