No one should use this in stock config. Period.
Вставка
- Опубліковано 7 сер 2024
- I decided to fully mod this keyboard after using it for a month | Keychron Q1 ft Black Cherry MX HG
Hello guys. First and foremost, I want to thank you all for the massive support this channel has been getting! You guys have been great and I thank God for all your guys' love for the work on this channel. At the moment, this channel has just surpassed 1000 subs. Yes i know, its crazy ! This milestone couldnt be achieved without the support from u guys !! And right now im super pumped to provide u guys a good and quality content. Thank u so much and I LOVE U ALL !! 😇
--------------------
Keyboard Spec :
* Keychron Q1
* Cherry MX Black Hyperglide w/ 205g0 + 105g0 + Kelowna Film
* Stock Stabs w/ Permatex + 205g0 + Epsi Mod
* Plate Foam + 1mm Silicone Sheets + Polyfill + PE Switch Pads
Tempest/Tape Mod
* WOB PBT (Cherry Profile)
* Correction, WOB PBT, not BOW PBT. Sorry :)
Mods:
1. IXPE Switch pad
2. Tempest / Tape mod
3. Force break mod
4. Silicone sheet dampener
--------------------
Timecodes:
0:00 - Stock typing test
1:00 - Cablemod Premium Keyboard Cable
2:00 - Intro
2:46 - Overview
3:22 - Item needed
3:36 - Assembly start
4:56 - Switch removal
5:22 - PE Switch Pad installation
6:02 - Switch installation
6:33 - Tempest / Tape Mod
6:55 - Case foam / dampener
7:57 - Force Break Mod
8:27 - Board assemble
9:15 - Keycaps installation
10:00 - Typing test
11:17 - Side by side comparison
11:55 - Outro
--------------------
Sponsor's: CableMod
store.cablemod.com/configurat...
--------------------
Affiliates
* CableMod Custom Cable - store.cablemod.com?ref=55824
* CableMod Custom Keyboard Cable - store.cablemod.com/configurat...
* CableMod Ready Made Keyboard Cable - store.cablemod.com/cablemod-k... - Наука та технологія
Wahhhhhhhhhhhhh! ❤️✨
🖤🖤
For being a smaller creator, this was an amazing video, well edited, and good quality. This also helped me decide some mods for my Keychron I just bought!
Hey thanks man for the kind words !!
Glad that this video did help u in modding your keyboard :)
The Q1 is really a great keyboard in its price range
Well, that's just keyb tubers in a nutshell. Low sub counts but very high quality content.
@@ramiru3264 heyy thanks bro for the compliments. Im flattered 😁😁
Just got my Q1 about two weeks ago. So happy to see a fully process video about modding! Gonna try this too, thank you for making this amazing video!
No worries, the pleasure is all mine.
And thanks for dropping by 🖤😀
@@IzuanHezri May I ask is it safe to not using any standoff screws? Thank you.
@@dan1mmm its quite safe actually. So far, ive never encounter any issue with that configuration.
The quality of your video is really impressive! Sound, lighting, Overlays! You got it all! Keep up the good work.On a side note, I prefer narration over written text.
Love the production quality. Subscribed!
Hey thanks man !! Really appreciated the gesture !!
Ah yes the algorithm has hit my recommendations and thank God it did. I've been looking for videos on the Q1 and this is such a calm, straight forward, video that covers what anyone would want to see in a video like this. Your editing is great and makes the video flow so well. Definitely can't wait for more and that's an easy subscribe. Keel it up
Hey thanks for kind words bro and the subs !! Really appreciate that 😁 🙏🏼🙏🏼
@@IzuanHezri Didn't think I'd come back here but just got a q1 recently and was wondering where you got your silicon sheet as I'm looking to reduce the ping in the lower case. I've heard silicon mutes the board compared to say poly fill or sound deadening material s, is this true or is the silicon to thin?
Very amazing video composition, Good job !!!
Hey thanks man !!
Thank you so much for this - the silicone pad is what I was looking for. Everyone else was using sound mat but ... Love this sound - can't wait to get my q1 together. (2nd build )
Right back at u bro !
Cant go wrong with Q1 :). Mind sharing whats your first build?
And thanks man for dropping by
First build was a KBD67 Lite R3
Great Video Lad , your video quality is way over the top , keep it up my man
Hey thanks man !!
Thanka for the kind words and thanks for watching the video 😁🙏🏼
Really appreciate that
Awesome quality brother. Love the build 🔥
Terima kasih brother sentiasa support !! 🙌🙌
Thank you for saving my Q1
Hey thank u 🙏🏼🙏🏼
I always love the vibes of your vids.... people might not like it, but I always love that hint of alu ping in every alu keebs.
Hey thanks for the kind words 🙏🏽
Haha i get u. Alu has that distinct sound profile. In this hobby, its an acquired taste right?
@@IzuanHezri Yeah! Before I hated it but after coming back from plastic boards into alu boards again, that ping actually grew in me 😄
Can’t believe youtube recommended me this so late, grats on getting a sponsor for being this small!
Hey, thanks man !! And welcome aboard !! :)
The production is insane for such a small channel wtf you deserve more subs man! Amazing video
Hey thanks man for dropping by and your kind words. Really appreciate that !! 🙏🏼🙏🏼
Q1 is one of the best keyboards of 2021 at it's price range. Really enjoyed using mine. Sold it off to but a Suit but now I am still missing out the q1
Cant agree more on that. Kudos to keychron to be able to provide such a good keyboard at this price range.
Oh man, that Mr Suit. Really wish i could get my hands on them one day. One fine day 😁
Hey thanks for the view man. Really appreciate that 🙏🏼🙏🏼
Terrific Vid
This was really well made. Enjoyed watching it very much.
Is the poly-plate recommended for dampening that Ping sound from the case? What I mean to ask, if I picked up the brass plate would the results be worse than what you’ve managed to achieve?
Hey bro, thanks for viewing the video and the compliments :) Really appreciate that.
Different types of plate does offer a different typing feel and sound signature. IMO, Yes, the poly plate did dampened the ping sound coming out from the board.
Well, maybe im wrong, or maybe im right. Cos i hadnt had the chance to try the brass plate on this board, otherwise it would give me a solid answer whether it does help with the ping or not :)
If u had the chance to try out the brass plate on this board, please do update me on how it turns out.
Pehh. Makin menggila mantap video abg ni..
Haha terima kasih brother
oh wow the video quality is amazing dude
Hey thanks man !! 🙏🏼🙏🏼🙏🏼
I saw Darth Vader and I immediately pressed the like button. Great video by the way. 😀
Hahaha. I get it. Anyway thanks man !
dang i think you put a lot of work into this!
Haha indeed bro 🙏🏼
this is legendary content from a small creator
Hey thanks man for dropping by and the compliments 🙏🏼🙏🏼
Very impressive video quality!
Hey thanks man !! 🙏🏼🙏🏼
Where did you get your screw driver from and as well as where can i get the Silicone sheet dampener?
Great work! Only sad thing here is that those hyperglides don't sound like hyperglides anymore.
Haha indeed
To me, as long as I still can feel the actuation of black hg, and remove the ping sound, its good enough :)
Anyway, thanks for watching the video
Hi
Nice video. any special or extra screwdriver/tool needed do the modding, re assembly etc ? Does the q1 comes with what’s needed for that?
Thanks!
Hi. Thanks man 🙏🏼
The stuffs that comes with the keyboard only can be use to dissamble the board eg hex screwdriver/ hex allen. U’ll need to buy other tool separately, eg scissors, tape etc etc.
Great mod video! Keyboard sounds so much better!
Does adding tape to the back of the PCB cause issues long term?
Hey thanks man !!
Yes it is safe, no worries. Just make sure that u choose the right tape for the job. Because some of the masking tape did have strong adhesive, this will be a problem in the future,
Painters tape is the best choice imo. It doesnt stick that hard.
Cheers !!
@@IzuanHezri Thank you!
@@TechManG u are most welcome my friend
great video helped me alot
Hey thanks man ! Glad that it helps 😁
Just ordered one and will be doing the same mods. Going to be swapping the stock phantom brown switches for something else. What's the total number of switches? Great vid! Subbed!
Hey thanks for viewing the video. Really appreciate it 😁
Theres a 82 total number of switches on this board. Hope it helps ✌🏼
I can smell the blueberry lung killer through the screen delicious
Be careful tho, dont stand to close to the screen, u might get infected 😆😆
@@IzuanHezri haha but for real you build really nice boards
Where did you buy the silicone dampener?
great job
Hey thanks man !! 🙏🏼🙏🏼
Exactly the same mods I did with my Q1, but I’ll suggest to change the force break mod tape to something thicker. After several weeks, the 3 layers of tape flattened out so much that the top and bottom are in contact.
End up with using some leftover Deskey films!
I see. Okay i'll take note on this. I think i have those leftover somewhere 😁😁
Anyway, thanks for the tips man ! Appreciate that.
So you used one layer of Deskey film? Or 3?
im going to use silicone tape like 3ildcat did
@@Duskr9 Deskey films are already thick. 3 layers of it will be too thick to close the case properly.
I used duct tape which worked fine.
Kalau keyboard tu Ori kilang, sye nak tambah silicone sheet, buat masking tape Dan buat switch pad je dapat ke bunyi macam ni bro? 😀
nice video! so you just installed the standoffs but didn’t screw the plate and pcb tgt? may i know why hahah
Hey thanks !
Haha. No particular reason. Lazy to remove the stand offs.😉
Ive installed and used the stand offs with screw during for previous setup(before the video recording). Thats why the stand offs is there.
What font do you use for the subtitles it looks really clean I'd like to use it
Hey thanks man.
The font typeface - comfortaa
Wow brilliant video! Can I ask why there's more masking tape layers on the bottom, 3, rather than the 2 on the top part?
Hey thanks man !!
Its just that i found the bottom part of the keyboard seems to produce more ping than the top area. Plus, it would give the space bar more definitive sound.
Nothing special bro 😁
@@IzuanHezri I'm a gal, but I underststand yes - have today modified mine to include one more layer of masking tape at the bottom of mine. Thanks!
@@sgist7824 Ahhh sorry then, i just straight away assuming..
Sure no problem. Glad could help :)
@@IzuanHezri 😊
The black keycaps fit great. Where did you get them?
Hey thanks for dropping by :)
I bought them from taobao
item.taobao.com/item.htm?spm=a1z09.2.0.0.67002e8dzLkDxI&id=611073193267&_u=h2ppal0hb049
Big difference wow! Btw bro is it the silicone sheet pre made or you made them urself?
Indeed bro, the tempest and pe did hinder the signature sound of black hg.
I bought them pre cut according to the keyboard size, trimmed and cut them by myself accordingly.
Oh anyway, thanks bro for watching the video :) really appreciate that
@@IzuanHezri No problem bro. Great video also deserved a like haha. Do you mind telling me the size you measured for the sheet as I would also like to order one from the link you included.
@@jaydenjau Hey thanks again man !!!!!!
I bought the 360mm x 150mm variants.
@@IzuanHezri Ahh I see I see. Which tool u recommend to cut the sheet tho? cutter knife?
@@jaydenjau Any sharp knife would do bro. As long as it can cut :). With a ruler. And a belt hole puncher to punch any whole if needed.
how many layers of tape did you use? Good job!
Hello there.
2 layer on top and middle section, 3 layer on the bottom row area.
I bought the ixpe foam from a AliExpress seller payed for for 4packs and only got 2. So pricy films. Real Eagles trading store. I can’t get them in Europe so that’s the only option I think I’ll stick to packing foam in the future getting the film is to much of a hassle
Hello there. Thanks for watching the video.
I understand your frustation there..
instead of silicone mat, have you ever tried anti-slip mat? would it work better?
Hm i havent tried the anti slip mat, maybe if i have them in hand i ought to give them a try 😁
The keyboard is great and all, but where did you got that Vader??? I need one in my life
Hey thanks man for dropping by and all !
THat vader head was a gift from my sister. Im not sure where she bought it. I'll ask her about it. :)
@@IzuanHezri yes! Please let me know :) also, great video. That Q1 sounded great after modding.
May I ask where you purchased the keycaps from?
Hey man thanks for dropping by ✌🏼
I bought them from local keyboard store bro.
Could you share the name of the black keycaps set in the video ?
Its just the generic WOB PBT i buy from a local fb groups. If im not mistaken, the name is "gliging WOB" or "yongqiu WOB" depends on where u from.
is the clear plate fixed to the pcb with brass standoffs? if so how will it flex anymore than the standard steel plate?
Hey thanks for dropping by
Do the PE switch pads make that big of a difference because I’m thinking of modding but the shipping on the sellers of them near me is very expensive.
Well not very but quite expensive
@@benshaener3044 hey thanks for dropping by 😁
Answer, im affraid it does. Due to the nature of pe mods, it changes the signature sound of the keyboard. It adds a "poppy" sound to your board. Im not quite sure the correct terms for it 😆 but lets just agree with that.
U can use the pe foam instead of pe switch pads just to get a taste of how it sounds like. Its easier to find and its dirt cheap ✌🏼
Hope it helps bro.
@@IzuanHezri thanks dude, I’ll try it
Which is better 1mm or 0.5mm silicone sheet. Will there be more flex if i use the 0.5mm ?
Hey thanks for dropping by 😁
0.5mm will definitely give u more flex. In terms of which is better, thats all come down to personal preferences. Hope it helps bro 🙏🏼
Where is the yellow Enter key from?
I took it from another set of keycaps. Cant remember exactly tho on which sets does it belong to. 😁
Anyway, thanks for dropping by 🖤
anything you would do differently now?
Hey thanks for dropping by 🙏🏼
Actually mu current setup for this board has changed. Going for the deep sounding signature. And ive uploaded a new setup for this. Please check it out on my channel. ✌🏼🙏🏼
Where do you got that keycaps?
Bought them from kbdfans.
Anyway, thanks for watching the video ✌🏼
I’m using stock because of budget lol. Plan to mod it later
Haha understand. Modding this board will took it to another level.
After mod serious bunyi macam stock akko green matcha switch + dampening foam
Serius? Hahaha.
Not a good sign tu.
Anyway, thanks bro tengok video yg tak seberapa ni. 🙏🏼🙏🏼
The keycaps
0:12 must be pretty cold where u live 😅
Lmao 🤣🤣
What is the maximum thickness of case foam can Q1 accommodate?
I reckon it would be around 1mm for full flex ✌🏼✌🏼
@@IzuanHezri Yeah, I used 1mm silicone sheet and about 6mm polyfill used on comforters, still has flex.
@@xSeanok yea bro. That was about the same config as im using right now without sacrifing the flex. Added the polyfill for extra sound dampening 😁✌🏼✌🏼
Do you use this for gaming? if so, does it lag like the gmmk pro?
Hey thanks for viewing the video, really appreciate that :)
TBH, ive never game this past 2-3 years. But if im not mistaken, the only thing that makes the board feels "laggy" is the switch actuation. Whether its a short actuation switch or vice versa. U may want to look for a short switch actuation if u want some fast response esp if u playing competitive game.
And the other thing is whether it is wireless or wired, well this is out of the question since both Q1 and GMMK Pro is wired right.
Hope it helps :)
Thank you so much. Review is really great also, very clean and minimal
@@alphaze5944 thanks man !! 🙏🏼🙏🏼
What is that clear plastic thing?
Hey man thanks for dropping by ✌🏼
I think u mean the silicone sheet
@@IzuanHezri No the clear plate
Woi sedapnya bunyi hnggghhhh
Hahaha. Thank u bro sebab tengok video saya yg tak seberapa ni.
And terima kasih bro support saya :)
Did I see that right? CableMod came out to $111?
Hey thanks for dropping by 🙏🏼
Hahaha yes it is. That original lemo connector alone is usd70. The rest is history 😁
@@IzuanHezri I appreciate the customization for colors, but that's out of budget for just the cable. Thx
you dont need to do all this. especially the tape mod, as it makes it sound cheap. Just replace stock stabs with good stabs (tx , sw knight, stabies) and force break mod
Hey bro. Thanks for dropping your thoughts without understanding the whole situation pf this video. The video is uploaded 2 years ago. Where none of the thing u mentioned is even existed. Tq
And clearly, u doesnt even know how big the tape mod is 2 years back. To the community, its like they have discovered how to extract gold from a rock. And hey bro, welcome to the community.
@@IzuanHezri I think the sound produced from the tape mod makes the board sound cheap. Its just my opinion. I think its good for boards that sound very hollow or don't sound good stock. I'm sure durock v2's existed 2 years ago too. Imo, the best thing you can do for q1 is to replace stabs. The stock stabs even when lubed and balanced aren't very good
Still some ping by like so much better
Hey thanks man for dropping by 🙏🏼🙏🏼😁
Kasi lube sikit bro cun ni..
Thank u for stopping by bro :)
Haha. Hyperglide mmg takleh nak completely hilangkan dia punya scratchyness tu. And bagi sesetengah orang, scracthyness HG tu lah yg buatkan tambah stim tu.
@@IzuanHezri sya punya keychron q1 knob sya kasi lube. Memang suka bunyi thock . Red Switch