HOW TO BALANCE SEVERAL MASSES IN DIFFERENT PLANES

When several masses revolve in different planes, they may be transferred to a reference plane , which may be defined as the plane passing through a point on the axis of rotation and perpendicular to it. The effect of transferring a revolving mass (in single plane) to a reference plane is to cause a force of magnitude equal to the centrifugal force of the revolving mass to act in the reference plane, together with a couple of magnitude equal to the product of the force and the distance between the plane of rotation and the reference plane. Two conditions to be satisfied are
The forces in the reference plane must balance, i.e.
the resultant force must be zero.
The couples about the reference plane must balance,
i.e. the resultant couple must be zero

[@brokenEngineerMathAndPhysics]

Man you are so underrated, best explanation ever saved me hours thanks.

[@pixelwoody6493]

Thank you so much sir. You really help me in my MoM test 😭

[@TECHCAD]

Thanks Pixel for appreciating my video...
All the best....

[@kelvinmugambi8447]

actually I can't thank you enough 😍😍😍😍😎😎...this was my best lecture.👏👏👏👏👏👏👏👏👏👏👏

[@TECHCAD]

Thanks a lot Kelvin..
Urs comment make a day....
All the best and God bless u...

[@kelvinmugambi8447]

@@TECHCAD Amen 🙏be blessed too🙏🙏. I wish I had money 😔

[@TECHCAD]

You will have a lot of money one day....... Be focussed on urs career...

[@harshithmadhu9602]

Hats off for detailed explanation

[@TECHCAD]

Thanks Harshit
All the best......

[@yeshwanthk2683]

really wonderful explanation sir, you deserve more ❤

[@TECHCAD]

Thanks Dear for the wonderful comment....
U can share the word of mouth of my work with others.
All the Best.....

[@adityaprakashyadav4716]

Which software have you used to draw the polygon?

[@IRSHATHJK]

Nice explanation thanks

[@TECHCAD]

Thanks Dear..
All the best....

[@dilokashayargaurav8813]

What a amazing explanation good job keep it up god bless you

[@TECHCAD]

Thanks Gaurav for the Great Appreciation....
You can share the word of mouth of my work with others .......
All the Best...

[@lhavaneshkunalan184]

Thanks a lot sir , the explanation was very detailed and understandable ,, ❤

[@TECHCAD]

Thanks kunalan for the appreciation...All the best...

[@MachuluriRamkrishna]

How to draw mx and my in reference plane

[@TECHCAD]

Dear
pls see the video at 12:50 for my in the reference diagram , the line is parallel to d'o'. and for mx the line is again parallel to dotted line irrespective of line lengths, as we are only concerned with angular displacement.
hope it is clear now.
ALL the Best

[@shiraohanah4872]

Thank you! finally i understand

[@swarnakamalmandal7904]

Very helpful &nice explanation❤❤❤❤

[@TECHCAD]

Thanks Mandal...
All the Best...

[@vedavyasa0304]

I find the video useful, thanks😊

[@TECHCAD]

Dear
Glad it was helpful!

[@khantnyi6765]

Sir can you please explain why you don't draw direction arrows of both polygons. And also, angular position of masses direction arrows. This is what I don't understand in the book.

[@TECHCAD]

Dear
As we draw the vector diagrams so direction is required in the both couple and force polygon diagrams. this is the reason arrows are required. i hope it is clear
All the best...

[@balajiraghavndra3886]

Thank you

[@apoorvareddytalapareddy0345]

Thank u 😊 sir

[@riyansheikh7535]

Thanks man 🙏

[@abhishekkashyap6133]

Thnku so much❤

[@anupamsinghmnnitallahabad6226]

nice sir

[@maddalasrisrikanth8340]

How we know in Which Model need to do
Is not mention...? Sir

[@iksharani175]

thanks☺

[@shaikgamingofficial3555]

How to get mass of y plane value?

[@Shallotgaming2002]

Sir why we measure angle in anticlockwise direction

[@TECHCAD]

Dear
Positive angles always measure in anti-clockwise direction.
All the Best....

[@Shallotgaming2002]

@@TECHCAD but sir in our college our teacher is measure angle in clockwise direction why?

[@himanshuvasava2010]

Damn I get full example without getting bored

[@TECHCAD]

Thanks and All the Best......

[@yogeshgiri4361]

Badhiya sir college me nhi padhaya itna achha to

[@TECHCAD]

All the Best Dear...

[@AyomikunOluwasusi-mk6sb]

The scale issue when u wanted to draw the force polygon sir I didn't get it

[@sd1082]

Buy Roller Scale

[@RAYUDU_ROCKY_45_999]

👍👌

[@sahilpingale1484]

At 14:10 can we assume 16m=1cm?

[@TECHCAD]

Yes Dear u can take any scale factor...

[@a.k.aproxi5442]

17:53 how did you make Mx?
other then is everything is awesome !!

[@TECHCAD]

Dear
with the help of roller scale or set square take the line parallel to dotted line on force diagram (which represent the Mx) and draw the exactly parallel line on the space diagram as shown in the video. the length can be any.
Hope u understand....
All the Best...

[@mohitpathak7091]

Space diagram given angle se bnaya gya hai

[@TECHCAD]

Yes As per the given angles..

[@MachuluriRamkrishna]

Hi sir

[@Usman-5322]

😂😂😂 Thanks sir g

[@TECHCAD]

All the best Dear....

[@azolagoodman7401]

Thank you