Balancing of rotating masses - Part 1 (Dynamics of Machineries) in tamil

Поділитися
Вставка
  • Опубліковано 14 гру 2024

КОМЕНТАРІ • 138

  • @focusacademylectures
    @focusacademylectures  6 років тому +31

    I ve done a mistake at 21:44 while drawing last line of polygon.
    Corrected diagram is here 👉🏻 ua-cam.com/video/_IfXysOzex0/v-deo.html

    • @mahendranmech8425
      @mahendranmech8425 6 років тому

      Bro porter&proell governor pathi explain pannunga

    • @sabarish1077
      @sabarish1077 6 років тому +1

      Sir very thanks to teach a rotating mass balance , the same question asked for in my university exam thank you so much

    • @itsmyaccount5084
      @itsmyaccount5084 5 років тому +1

      Sir please upload more imp questions of dom

    • @santy2312
      @santy2312 5 років тому

      Super sir, it's very useful for me

    • @sulochanachiranjeevi3281
      @sulochanachiranjeevi3281 4 роки тому +1

      Aama thala paathan yosichitea irundhan enada nu

  • @VasanthaKumar-ph1wf
    @VasanthaKumar-ph1wf 6 років тому +4

    தெய்வமே கடவுளே நன்றிகள் கோடி Supper sir .i will pass tomorrow exam u r blessing.

    • @focusacademylectures
      @focusacademylectures  6 років тому +4

      this is not enough.. prepare many sums based on this procedures

  • @infantkarthik1509
    @infantkarthik1509 5 років тому +13

    Very rare to see Tamil channel nice job bro plz upload more video brother I need engineering maths video plz help me

  • @ganapathysiva6189
    @ganapathysiva6189 3 роки тому +3

    no words to say about your teaching sir...vera level..explanation...thank you so so much sir.thanks a lot...

  • @ranjithkumarravi3851
    @ranjithkumarravi3851 6 років тому +13

    Theivame 😍😍 Intah maariye ela unit Kum potuteengah nah Sub onume ilama poidum😋

  • @sivakumarm2053
    @sivakumarm2053 5 років тому +1

    Super sir👌👌enaku ipodhan dynamics mela interest A varudhu. Rommba easy ya puriyudhu sir neenga learn panum podhu. Rommmmba thanks sir 🙏🙇🙏🙇🙏🙇

  • @d.lakshmanakumarv29
    @d.lakshmanakumarv29 Рік тому +1

    Thank you so much sir😊
    Unga videos pathu dha naa problematics subjects elllam padikren
    Tough aana subjects kooda ippo naa first attemptla cleart paniten
    Finite element analysis
    Kom,dom,dme,dts,hmt, indha mari kashtama subjects ellam fitst attemptla clear panna mudiyadhunu nenachen
    Ippo naa ellam clear paniten because of you sir
    Thank you so much 😊🙏

  • @singintherain4526
    @singintherain4526 5 років тому

    indha madhiri lessons eduthutundha na arears ey vachuruka maaten .....thank u sir 🙏🙏

  • @surajpreetham3107
    @surajpreetham3107 5 років тому +1

    Its a sincere and neat presentation.

  • @cyrilveronick4046
    @cyrilveronick4046 2 роки тому +8

    Bro literally saved my ass today
    Thank you bro❤
    Keep doing the same.
    We are here to support you ❤

  • @thamizhkvp17
    @thamizhkvp17 5 років тому

    Sir neenga romba nala edukiringa..
    Nala puriuthu...innum neraya
    AU mech subjects videos podunga..

  • @vijaytech9886
    @vijaytech9886 6 років тому +14

    Super sir . please all unitum explain pannunga .ungaluku punniyama pogum.

  • @arunarjun3237
    @arunarjun3237 5 років тому

    Bro romba nandri unga naala xam la indha qstn vandhu pass aana romba nandri ❤️👌

  • @deva2423
    @deva2423 6 років тому +6

    super sir i kindly requesting you to plzz yellaa unitum sollithaga sir

  • @kaiser2400
    @kaiser2400 6 років тому +2

    Great explaining ... great thanks to you

  • @thariqanwar.m.m
    @thariqanwar.m.m 2 роки тому

    Bro please upload thermal engineering 2 problems ur explanation is very clear I ever see in UA-cam

  • @ashwinkumar3044
    @ashwinkumar3044 Місяць тому

    Nice explanation… thank you bro 🎉

  • @suryarajendran2850
    @suryarajendran2850 5 років тому

    Superb bro ....and clearly understand ..thanks for this video

  • @nagarajank4652
    @nagarajank4652 6 років тому +2

    Super sir wonderful explanation but i want more videos about theory of machine

  • @Nzjuju
    @Nzjuju 6 років тому +2

    Semma sir
    Thank you so much 😍😍😘

  • @silversoul6366
    @silversoul6366 6 років тому +2

    Thank you sir !! Very useful

  • @EngineerBharani-sh3tp
    @EngineerBharani-sh3tp Рік тому +1

    Awosome explaining

  • @vijaytelivision2137
    @vijaytelivision2137 2 роки тому +1

    Sir vera level explain

  • @abimanyu0076
    @abimanyu0076 Рік тому +1

    Easy to understand sir 😁 Do well

  • @ponkarthikeyan3926
    @ponkarthikeyan3926 4 роки тому +1

    I need for explanation for below som (couple polygon)
    A shaft carries four rotating masses A,B,C and D which are completely balanced .The masses B,C and D are 50 kg ,80 kg and 70 kg respectively. The masses C and D make angles of 90 & 195 respectively with mass B in the same sense.The masses A,B ,C and D are concentrated at radius 75 mm, 100mm ,50 mm and 90mm respectively. The plane of rotation of masses B and C are 250mm apart .Determined: i) the magnitude of mass A and it's angular position and
    ii) the position of planes A and D

  • @muthukaalai4363
    @muthukaalai4363 2 роки тому +1

    Vera level bro 🔥🔥🔥

  • @naveenkumarr2981
    @naveenkumarr2981 5 років тому

    Super sri I will support yoy

  • @kaleeswaran7607
    @kaleeswaran7607 2 роки тому +1

    It's very very usefull for my studies.thankyou sir ❤️

  • @VenothMbrutalism2071
    @VenothMbrutalism2071 4 роки тому

    Really awesome sir.

  • @rajas2279
    @rajas2279 5 років тому

    Its very usefull sir 😍😍 thxx sir

  • @manyou5702
    @manyou5702 4 роки тому

    It's so easy thanks you so much bro

  • @abishaikhbabu6756
    @abishaikhbabu6756 6 років тому +4

    Sir this video is very useful for me .please upload the other units before 9/11/2018 bcoz I have Dom exam .thank u ❤️

  • @karthick-sp3qj
    @karthick-sp3qj 5 років тому

    Thanks for your valuable video

  • @subathishsubathishj4840
    @subathishsubathishj4840 5 років тому

    Semayoo sema sir....Tqqqqq

  • @rethinasabhapathy3785
    @rethinasabhapathy3785 6 років тому +1

    Tqsm sir.... 🙏🏻🙏🏻🙏🏻🙏🏻

  • @saravanana7073
    @saravanana7073 5 років тому

    Very helpful Sir

  • @HK-fq6vh
    @HK-fq6vh 2 роки тому +10

    Onnume puriyale ulagathile 🥴

  • @cibi5514
    @cibi5514 5 років тому

    Romba nandri🙏

  • @kanishkanish5277
    @kanishkanish5277 Рік тому +2

    Tq

  • @karthiks9306
    @karthiks9306 6 років тому +2

    In point My value ur make a mistake direction of My in positive but u draw in negative

  • @harisnazzar850
    @harisnazzar850 5 років тому

    Thanks brohh💞💞💓

  • @MasTer-ed6ty
    @MasTer-ed6ty 5 років тому +1

    Perfect ...but i have one doubt ...how did u take that My line in left hand side in force polygon

  • @dhivakardhiva3605
    @dhivakardhiva3605 6 років тому +1

    Thank you sir. hmt video podugah sir

    • @focusacademylectures
      @focusacademylectures  6 років тому +1

      dhivakar dhiva hmt enaku theryathae.. topic solu na learn panitu podren

    • @dhivakardhiva3605
      @dhivakardhiva3605 6 років тому +2

      Mechanical Engineering in Tamil hmt 2 unit important problems sir

  • @SenthilKumar-ws9ey
    @SenthilKumar-ws9ey 6 років тому +1

    Superb

  • @skmohanraj4601
    @skmohanraj4601 5 років тому

    super....sir

  • @e.selvasoundrapandian8962
    @e.selvasoundrapandian8962 5 років тому

    Thank you so much sir

  • @Ayiram.K
    @Ayiram.K 2 роки тому +1

    Midway is placed between 3&4
    No midway between 4&1
    Cople polygon we can known the My that is placed between3&4 Not placed between 1&2

  • @Yhjsdyhj
    @Yhjsdyhj Рік тому

    Deivam sir neenga

  • @vijaytech9886
    @vijaytech9886 6 років тому +2

    Innum 3problem solved pannunga sir I will better

  • @Hariharan-fv3oq
    @Hariharan-fv3oq 4 роки тому +1

    samma sir ilke your videos

  • @KUMARAVELMMECH
    @KUMARAVELMMECH 2 роки тому +1

    Bro ithula 0.009my yeppadi yeduthanga ,konjam puriyura maari sollunga

  • @sivajegan3897
    @sivajegan3897 4 роки тому

    Sir please make video for MACHANIC OF MATERIAL

  • @kaursingh637
    @kaursingh637 5 років тому +1

    PLEASE NAME BOOK ON MACHINE DYNAMICS ==PLEASE GIVE CAPTIONS IN ENGLISH - U R EXCELLENT = PLEASE SPEAK IMPORTANT POINTS IN ENGLISH --THANK U SIR

  • @nagarajank4652
    @nagarajank4652 6 років тому +3

    What is the difference between the balancing of several masses in the same plane and balancing of several masses in different plane sir

    • @focusacademylectures
      @focusacademylectures  6 років тому +1

      slideplayer.com/slide/5806935/19/images/28/A+B+C+D+L+M+Balancing+of+several+masses+rotating+in+different+planes.jpg
      this is the image of diff plane... to balance that we have to find the appropriate plane to add mass...
      for same plane balancing.. there ll be only one plane.. so just finding the mass value to add.. is enough.

  • @shravanm1996
    @shravanm1996 6 років тому

    Thank you sir :)

  • @kaviyarasangnanasekaran7382
    @kaviyarasangnanasekaran7382 3 роки тому +1

    Where is part 2 of this video
    I can't find it anywhere
    great video🤩🤩

  • @kumarankumar9169
    @kumarankumar9169 5 років тому

    Super sir

  • @thamizhselvan3572
    @thamizhselvan3572 6 років тому

    Thank you sir

  • @ruwai777
    @ruwai777 4 роки тому

    supper

  • @karthikeyann513
    @karthikeyann513 2 роки тому

    Sir intha sum la, mx value 0.05 epadi eduthunganu solunga (tabulation)

  • @prasanabalaji2357
    @prasanabalaji2357 6 років тому +1

    Sir at 21.44 u told to draw the line in the same direction as that in angular position of planes diagram but i think you have drawn in opposite direction? Can you clear it sir?

    • @focusacademylectures
      @focusacademylectures  6 років тому

      prasana balaji yea dude... I ve done the correction in next video.. watch that also

    • @prasanabalaji2357
      @prasanabalaji2357 6 років тому

      @@focusacademylectures thank you sir.... Also please upload for proell and hartnell governor

  • @yeshkv8658
    @yeshkv8658 3 роки тому +1

    BRO MAKE HARTNELL PROBLEM PLEASE

  • @subashbose2924
    @subashbose2924 5 років тому

    super

  • @robinr6334
    @robinr6334 5 років тому

    Bro.... question la 1&2 kku mid la tha Mx vanthu chu ana angular diagram la maddu yethukku change aguthu🤔🤔🤔sollunga

  • @suriyaprakash8379
    @suriyaprakash8379 6 років тому +1

    sir analytical method for rotationg mass?????????

  • @jeganathanm3015
    @jeganathanm3015 5 років тому

    Thanks sir

  • @pradeepabarkave6619
    @pradeepabarkave6619 5 років тому

    Anna , ipo angular positions kudukama iruntha epdi proceed panrathu

  • @Venkeyyyy._
    @Venkeyyyy._ 5 років тому

    Bro first couple diagram la entha place la irunthu degree eduthinga

  • @josephgcg
    @josephgcg 6 років тому

    Sir could you please cover the forced vibration and free vibration in Dynamics of machine

  • @sriganthranus478
    @sriganthranus478 2 роки тому

    Sir I have one dovt from y-direction in force polygon. why ? you're taken y-direction in opposite side ??

  • @freedamfighter....5357
    @freedamfighter....5357 6 років тому +1

    Sir. force polygon la D point la irrunthu how to draw a 0 665 plain e

  • @yuvarajm0101
    @yuvarajm0101 4 роки тому

    Scale conversation doubt,any new examples

  • @dbalaji8573
    @dbalaji8573 3 роки тому

    Sir while drawing force polygon namba angular position diagram la patha mass 1 ku aprm mass y thana irukku namba adha thana nxt variyanum? But neenga tabular column la irukaratha varnji irukinga

    • @focusacademylectures
      @focusacademylectures  3 роки тому

      All the forces are arranged in sides of polygon. Entha order la venalum irukalam. Directiom and magnitude correct ah irukanum

    • @dbalaji8573
      @dbalaji8573 3 роки тому +1

      @@focusacademylectures ok sir thank you your way of teaching is nice and thanks for clarifying the doubts also

    • @focusacademylectures
      @focusacademylectures  3 роки тому

      Welcome.

  • @suriyaprakash8379
    @suriyaprakash8379 6 років тому +2

    sir bt in fore polygon... you draw a m(y) opposite direction to the mass m(y)... why?

    • @focusacademylectures
      @focusacademylectures  6 років тому +1

      achoo yes i did wrong.. i ve corrected that in next video ua-cam.com/video/_IfXysOzex0/v-deo.html

    • @suriyaprakash8379
      @suriyaprakash8379 6 років тому

      ohhh ok tq sir😊... i need reciprocating mass also sir... in both geometric and analytical

    • @focusacademylectures
      @focusacademylectures  6 років тому +1

      Surya Prakash i will try when i ve found time

    • @suriyaprakash8379
      @suriyaprakash8379 6 років тому +1

      tq sir ❣️ for reciprocating mass

  • @amarnathan1820
    @amarnathan1820 5 років тому +1

    More than same send

  • @maheswaran5122
    @maheswaran5122 5 років тому

    force polygon write pannum pothu My kku paralla same direction write pannama why opposit direction la aan write paninga

  • @rockstarramnad9759
    @rockstarramnad9759 6 років тому

    Sir upload DOM all units

  • @mohamedminhaj9219
    @mohamedminhaj9219 14 днів тому

  • @mahendranmech8425
    @mahendranmech8425 6 років тому

    Hello brother,intha video notes PDF description la add pannunga

  • @theunderestimate4006
    @theunderestimate4006 4 роки тому

    10.25, sir how did you take x plane as reference plane sir...how we want to choose RP for a sum sir..it our wish to choose sir...

    • @focusacademylectures
      @focusacademylectures  4 роки тому +2

      We can choose any unknown plane as ref... So it ll be easy to calculate another unknown

  • @jacksonbabu5394
    @jacksonbabu5394 5 років тому

    Sir same plane question how to solve

  • @Tsanjay-cl8dc
    @Tsanjay-cl8dc 2 роки тому +1

    MX mass epadi potigaha

    • @focusacademylectures
      @focusacademylectures  2 роки тому

      Video la explain panirkanae

    • @Tsanjay-cl8dc
      @Tsanjay-cl8dc 2 роки тому

      @@focusacademylectures m ok angle kudukalana epadi angel kandu pudikanum

    • @focusacademylectures
      @focusacademylectures  2 роки тому

      Line parellel to couple polygon draw pani... Angle measure panikanum

    • @Tsanjay-cl8dc
      @Tsanjay-cl8dc 2 роки тому

      @@focusacademylectures angle thevailaiya bro

    • @focusacademylectures
      @focusacademylectures  2 роки тому

      Angle last ah measure panikanum... Draw panrathu parellel to force or couple polygon, then we can measure angle

  • @aeronauticalengineeringaer9590
    @aeronauticalengineeringaer9590 5 років тому

    bro pls upload scanned copy.......

  • @Naveenkumar-ls1bj
    @Naveenkumar-ls1bj 5 років тому

    Hlo bro som unit 3 open coil and closed coiled spring problem video

  • @arjunruparel0851
    @arjunruparel0851 5 років тому

    Sir intha sum download panna link kudunga sir plzzz

  • @mechmech5261
    @mechmech5261 6 років тому

    sir pls complete 5 units
    because exam going to come

  • @dhaskrishnanjayan3439
    @dhaskrishnanjayan3439 4 роки тому

    Going to 9th sem.. due to lock down 5arrs + 3current iruku🥺 any one pls tell idea to pick up all backlogs

  • @a1ledlights744
    @a1ledlights744 4 роки тому

    anna ennagu impartan qqestion venu please

  • @Venkeyyyy._
    @Venkeyyyy._ 5 років тому +1

    Bro 8cm,16cm,28cm ithellam given ah bro😶

  • @KishoreRajan-h6z
    @KishoreRajan-h6z 13 днів тому

    Sir onnuma purila pathi solludriga pathi sollamathiga sir

  • @elango8125
    @elango8125 5 років тому +1

    Oru pundaium purila

  • @vishnuknp4630
    @vishnuknp4630 Рік тому

    😆😡😡😡😡😡

  • @Yhjsdyhj
    @Yhjsdyhj Рік тому +1

    Thank you so much sir

  • @Atchaya78
    @Atchaya78 9 днів тому

    Thank you sir ❤