Dude, you did what I dream of doing. I don't mean by making a great step by step product, but by making it open source for the whole world. Thank you so much for your dedication and hardworking to make this possible. You are truly a inspiration.
This project carried out by you was wonderful, my dream is to be able to execute one like it, with such clean execution, only that in my country it is difficult at this time... congratulations, greetings
That's a great way Build the Filament extruder. Great work. Keep Posting. I have checked the ARTME support and unfortunately i cannot import to my country due to higher Customs Duty, So would like to know the Bill of Materials and parts which you have used to make this. So that i can procure locally and get my Hands on this DIY. Would you care to create a blog/page with Materials, electronics, firmware, etc for fellow DIY enthusiast?
Astonishing! In design and in execution. Just flawless. I couldn't get how that escape-like mechanism works, though (the one that ensures incoming filament is rolled evenly along the spool). Could you give some explanation? Thanks.
@@fu-opent Thanks, the "rotate an move laterally" bit is the part I didn't get. How it works for the leadscrew to reverse direction once either limit has been reached? For sure it has something to do with with the "escape" mechanism (as seen in clocks), but was curious on how you made it and neither of the videos show it clearly (it would be too slow anyways, unless you'd had spent some time on it, rotating it by hand).
I always chat with you through an interpreter. The screw rod reverses mechanically. When it reaches the boundary, the spring pushes off the Y-shaped structure to rotate in the opposite direction。16:06
Nice to meet you, I saw your video of the filament machine, you are a genius, I congratulate you. I wonder if you could make a machine of this style, but only the injection part without the filament part is to make small production plastic parts in an aluminum mold. If you can please tell me how much would it cost?
Vary Clever.. But unless any of us have Engineering & Electrical skills and tons of money for the special tools and work shop, there is no way we can do this even having the plans? Your a very clever man and well done as even just the designing of the parts is hard for most people.. but all that stuff together is beyond most of us. Sadly.
Bravo! Jsi výborný konstruktér a stroj vypadá úžasně! 🙂 A děkuji za sdílení tvého díla!
Восхитительная работа, всё спроектировал, и железо, и электронику и всё это довёл до конца, браво!
am planning for a extruder machine myself and your take on it is by far my favorite so far. great work!
You need more likes mate! This is really well done and so neat and tidy. Good job!
What a wonderful work!! And nicely put together video! Subscribed! Looking forward for more filament making videos😊
Wow! Outstanding design! Please, keep it up and thanks for sharing 👍🏻
好強。
這可能是網路上的最好版本~~~
Dude, you did what I dream of doing. I don't mean by making a great step by step product, but by making it open source for the whole world. Thank you so much for your dedication and hardworking to make this possible. You are truly a inspiration.
您做的非常好加油!👌
Чел, да ты крут! Все спроэктировать да еще чтоб так мало места занимало! 👍👍👍
真很好了。 感谢分享。 Pretty cool. thanks for sharing man.
Carry on!!!!! this was amazing and looking to make my own! a follower and subscriber from here on out!
你是男人中的王子。
这种慷慨使人类的未来成为可能。
you are genius..... Plastic threads are very expensive in my country This amazing machine is very useful
thx for your video...its really inspiring. Good job and congrats.
Greetings from Germany
Awesome project, cool montage, congrats!!
Incredible Build. Your machine looks very Professional. Well Done.
You -are very talented engineer!/Вы очень талантливый инженер! Its a beautiful machine! / Это красивая машина!
Good job syncing each picture to the beat of the music. 😀👍
Genio, Inventor, CONGRATULACIONES..!!
класс! здорово! молодец! результат впечатляет. Дешево и сердито. есть место для совершенствования.
Amazing 👍 awesome work. Thanks for sharing ❤❤❤
Wow 🤩 U are so skillful! Amazing DIY project! I do want to build one myself. Is it open sourced?
Way better than lego in my early days!
Very impressed... this is well thought out project with some wonderful ideas... thank you.
Unbelievable! Awesome. Keep posting...
Awesome work mate 👍
Ryuji: good to know that someone finally doing something about all the plastic on the planet.... Just brings a tear to my eye *sob*
😍 whoow, thanks for sharing your of your amazing experience brother! Beautiful setup of the whole project 🙌🙌🙌
Awesome ! very nice project ! ☺️
Artme and Now This!.. AWSOME!..
It shouldn’t be long now..
Outstanding!Well done
That's fn amazing! Thank you for making this vid and putting sick music in it. Have you included the soundtrack please!
Good job, incredible skill! Do you think it's feasable to make home made shredder to recycle prototypes?
amazing video! super project
Шухляда з кнопочкою в гаражі - тепер моя мрія. Респект.
Elegant design, great video
what a beautiful thing to say, respect!
nice video thanks for sharing!
Good luck and best regards from the Netherlands!
Rob
Good luck
Amazing job 🙏🏻😊
wow, it's amazing, you should have many more likes
Amazing work !
Ti stimo fratello!!! Sei un fottuto genio!!!❤
This project carried out by you was wonderful, my dream is to be able to execute one like it, with such clean execution, only that in my country it is difficult at this time... congratulations, greetings
谢谢。你从哪儿来
@@fu-opent 你好 fu, 我來自委內瑞拉, 我在這乾了幾年,四十左右,願你多有成就
@@semillatech1791 Nice to meet you. I wish you a long and happy life
@@fu-opent the same for you, successes
Excellent job👏👏👏👏👏
真的好強😊
You are master of all trades! Like!
That looks so cool. Can you use this to crush and recycle failed prints and support ?
Excellent Work
I want make it in real 😍😍
Great job bro you have earn subscribe.
Keep up
Great video boy, you are a privileged mind of wisdom, congratulations.
Creative video, thanks for sharing it :)
that's great mate, very good job. are you thinking of making a recycle crushing machine too . all the best.
贵在折腾。。。好有乐趣的DIY。。。
That's a great way Build the Filament extruder. Great work. Keep Posting.
I have checked the ARTME support and unfortunately i cannot import to my country due to higher Customs Duty, So would like to know the Bill of Materials and parts which you have used to make this. So that i can procure locally and get my Hands on this DIY.
Would you care to create a blog/page with Materials, electronics, firmware, etc for fellow DIY enthusiast?
Отличный аппарат! Когда-то то же делал себе экструдер, но из-за наличия дешевого пластика в магазинах, забросил это.
Astonishing! In design and in execution. Just flawless. I couldn't get how that escape-like mechanism works, though (the one that ensures incoming filament is rolled evenly along the spool). Could you give some explanation? Thanks.
You mean the looper? This is a mechanical operation mechanism. A motor at a fixed speed drives the upper screw to rotate and move laterally.
@@fu-opent Thanks, the "rotate an move laterally" bit is the part I didn't get.
How it works for the leadscrew to reverse direction once either limit has been reached?
For sure it has something to do with with the "escape" mechanism (as seen in clocks), but was curious on how you made it and neither of the videos show it clearly (it would be too slow anyways, unless you'd had spent some time on it, rotating it by hand).
I always chat with you through an interpreter. The screw rod reverses mechanically. When it reaches the boundary, the spring pushes off the Y-shaped structure to rotate in the opposite direction。16:06
Super this lecture is very well sir
Amazing work.
excellent work!
Very very NICE !
Интересно было посмотреть на ваш принтер очень занимательная конструкция и решения
великолепное видео. Особенно ценники вначале
This lecture is very nice
Cool ☺️☺️, is OpenSource?
Cool, thanks for Video
Its very nice Maschine , komplimento for You , lg Swiss mechaniker ❤❤❤❤
Very cool thingy!
Nice project. i have a question - can this device do filament from pet bottle?
This is amazing work
Félicitations pour votre création.
Cool idea!
Excelente trabajo,¿es de codigo abierto?¿como conseguir los planos?
Excelente muy bueno
Nice work dude!
How can you take a screw and CNC parts?
Design of parts is opensource?
成日用完ABS飯盒覺得好嘥。好想整一部整膠線賣🤣
you are an inventor!
very nice my friend you are successful human
Travail incroyable, un veritable genie , si tu nous partagé tes fichiers stl , se serait top , merci
Obrigado para seu Trabalho, Você pode compartilhar os arquivos stl que você usou?
thank you buddy!
Спасибо за идею брат! ты гений
Very Very good 👏👏
great work 👍 👍
An ingenious use for the drill bit, great project. Please tell me the name of the software you use for design.
Solidworks
you are magnificent, my brother.
Dang! I want one dude! Super awesome! Subs here.
your design looks abit different than the original, what mods did you add/ edited
WOW MAN! SICK!
Nice to meet you, I saw your video of the filament machine, you are a genius, I congratulate you.
I wonder if you could make a machine of this style, but only the injection part without the filament part is to make small production plastic parts in an aluminum mold.
If you can please tell me how much would it cost?
It's better than a filastruder i give you that, and depending on the exact component choice probably cheaper as well.
You are best😮
congrats bro.
cok mukemmel
Vary Clever.. But unless any of us have Engineering & Electrical skills and tons of money for the special tools and work shop, there is no way we can do this even having the plans? Your a very clever man and well done as even just the designing of the parts is hard for most people.. but all that stuff together is beyond most of us. Sadly.
Very good!
厉害了·
Very nice
Congratulations beautiful, sorry where can I find the project for the 3d print desktop filament extruder
you rock brother!!
sos un maestro chino `