Sump cutting placement for water inlet seems a bit out of place but I could be wrong. Waiting for the motor to run to check it's effectiveness. Also why didn't you cut for the outlet for cleaner look. Are to planning to spray water like rainfall or waterfall. Might look a bit ugly but manageable if you use black pipes. If you plan to put bigger media in the first compartment then it would be okay I guess followed by bioballs, ceramic rings and lastly sponge before the motor pushes the clean water into the tank. 🤔
Bhai apke 1000 videos hai tanks pr fishes pr jo apne setup kiya but marine nahi banaye apne Marine banao aur step by step hume bi sikhao kum paise m marine kaise banaye
Very nice inbuilt sump system, sir apne ek galti kari he akrelic glass ko lagane se pahale sabi glass ko ek bar gum lagate to ache se fit hota ta sabi jaga
Sir aquarium pura glass pesting karne ke bad jab aquarium taiyar ho jaega, to side ka sume filter ke partition ke liye, Jo glass lagaenge to usse aquarium ke base ka glass Jo pasting Kiya hai vah To naiche se cut ho nahi ho jaega, ya to side glass ko base side se thoda sa round Kara de, ya to aap hi bata de sumr filter ka glass install kab Karen please sir ji mujhe kal aquarium banana hai .
Nice sir , but ek baat bataiye ye black sheet ki jagha ham log black glass bhi tho use kr sake hai ! 5 mm ka 400,500 me glass mil jaaega tho itna mangha ye kyu lgae ???
Sir mene ek silver arowana buy kia tha takriban 9inch ka before 1 month but wo abhitak feed nahi le raha hai even I have tried with the live fish ,iska khuch solution hai kay aur wo koi bhi human ko dekh ta hai to chup jata hai and someone told me to use metrogyl 400 and also rock salt ....but as owner I am not satisfied so is there any solution you have what should I do..right now I am feeling very sad regarding this ,I have placed heater at 28 degree and also sponge filter.....pls refer some solution
Sayeed bhai Same type of tank I made 1 year back. I used glass to save the cost. But it's too amazing it's works flawless. Withing one hour water gets filter.. but Just want to confirm with u that where is outlet and why two inlets given at bottom n top I'd didnt understand.
Already the tank is too small bro for fancy goldfish. You could have used an external filter such as canister or sump. For fancy gold's a minimum 3ft tank is required to keep them healthy and happy.
Bhai itni mehgi gappy la raha hu but sab mar rahi hai palanted tank me . Heater bhi lagaya hu 26 per . Hang on filter laga hai or 30% water bhi change kar raha hu 2 days me 😢
@@SyedShah5001 maybe I could be wrong. But I think there should be a cutout for outlet on the other end. Also I’m eager to know how the bottom inlet would work. Waiting for part two.
Down side holes only for reserve water it will reserve water to push water otherside because it will help to push more water towards filter @@kennykenny5273
Fish chala gaya tha aapke ghar ko aap jakar Dekh Kar Le lagao Vaishali parcel Mangamma Chhota Bada a Jaega aap Dekh Ke Lele ko Kabhi let Hai To Parwani video banata na aap vaise hi Jagah hi Dekhkar vaise banate Dekh Kar Achcha Raha to Le lega aapko
Ma sha ALLAH. Excellent work..❤. Good video
thanks 👍🙏
Bhai Is this for marain tank set up❤❤❤
Love from Mysore Karnataka ❤❤❤
thanks and it's not marine tank
Love your videos this concept i really like it thank you for sharing your idea
you welcome always
Bahut behatrin bhaijaan ❤️❤️
shukriya bhai
Looking beautiful super ❤❤❤
Thank you 😊
Syed bhai Kamal ka ieda taa😊
thanks 👍😊
I was searching for this video, Good DIY filter
you welcome always
Sump cutting placement for water inlet seems a bit out of place but I could be wrong. Waiting for the motor to run to check it's effectiveness.
Also why didn't you cut for the outlet for cleaner look. Are to planning to spray water like rainfall or waterfall. Might look a bit ugly but manageable if you use black pipes.
If you plan to put bigger media in the first compartment then it would be okay I guess followed by bioballs, ceramic rings and lastly sponge before the motor pushes the clean water into the tank. 🤔
will update tomorrow
Very best filter 😊
Idea is very nice 👌 👍
thanks 👍🙏
Syed Bhai thoda jaldi jaldi videos dalna iss video ke lie may kalse wait kar raha tha..because apke videos bohath achhe hote hai..
time lagta usko dry karne k liye chodna ye sab
❤😊 all the best
thanks 👍🙏
Bhai apke 1000 videos hai tanks pr fishes pr jo apne setup kiya but marine nahi banaye apne
Marine banao aur step by step hume bi sikhao kum paise m marine kaise banaye
ok soon aiega video
Mashallah very good work good luck 🤞
thanks 😊☺️
Nice filter 👍
Thanks 👍
Great idea bro.. will it work for a 7 feet/ 2 feet/2 feet tank??
Video Is So Much Helpful 🙏
thanks
Nice video and best filter
thanks 👍🙏
Very nice inbuilt sump system, sir apne ek galti kari he akrelic glass ko lagane se pahale sabi glass ko ek bar gum lagate to ache se fit hota ta sabi jaga
lagaya hai silicon
Silokon tutuyor mu@@SyedShah5001
Beautiful Tank
thanks 👍🙏
Assalam walikum bhai
Kiya power head filter use kr skte h internal sump filter k liye... Aur kaise
no
Nice 👍 good work
Thanks ✌️
Can’t wait for marine tank.
soon
Sir aquarium pura glass pesting karne ke bad jab aquarium taiyar ho jaega, to side ka sume filter ke partition ke liye, Jo glass lagaenge to usse aquarium ke base ka glass Jo pasting Kiya hai vah To naiche se cut ho nahi ho jaega, ya to side glass ko base side se thoda sa round Kara de, ya to aap hi bata de sumr filter ka glass install kab Karen please sir ji mujhe kal aquarium banana hai .
no
Nice sir
thanks 👍🙏
bro muje 24 * 20 * 18 ka aquarium bana he to 6 inc me bana lu kya ya 8 inc me banao
6mm ok
Knowledgeable video❤❤
thanks 👍🙏
Bhai mujhe ek doubt hain
Is mein fish potty kaisa filter mein jayega
nahi jaiega siphon karna padega
Nice sir , but ek baat bataiye ye black sheet ki jagha ham log black glass bhi tho use kr sake hai ! 5 mm ka 400,500 me glass mil jaaega tho itna mangha ye kyu lgae ???
haan karsakte hu lekin cutting glass me aisi nahi aiegi
4MM ki acrylic b 700 tak aajaiegi with cutting
Sir mene ek silver arowana buy kia tha takriban 9inch ka before 1 month but wo abhitak feed nahi le raha hai even I have tried with the live fish ,iska khuch solution hai kay aur wo koi bhi human ko dekh ta hai to chup jata hai and someone told me to use metrogyl 400 and also rock salt ....but as owner I am not satisfied so is there any solution you have what should I do..right now I am feeling very sad regarding this ,I have placed heater at 28 degree and also sponge filter.....pls refer some solution
keep temperature 28 always on heater and add some stress heal liquid and check water flow rate of filter
Will you please provide the address where you did the acrylic cutting?
where you from
@@SyedShah5001 i am from Whitefield Bangalore Bhai
Bhai main apne aquarium main jitna bhi fish laraha hoo sab fish ek ek kar ke marjarahi hai kya karo please reply me
Tank Cycling Karo achhe se atleast 3 days new tank me fishes mat dalo direct
purana pani hona chahiye
@@SyedShah5001 bhai abhi Mera koi apna body rub kar Rahi hai toh main general aid use kar sakta hu
Sayeed bhai Same type of tank I made 1 year back. I used glass to save the cost. But it's too amazing it's works flawless. Withing one hour water gets filter.. but Just want to confirm with u that where is outlet and why two inlets given at bottom n top I'd didnt understand.
2 inlets never lets dry water in motor area
@@SyedShah5001 Sayeed bhai, aap sab itna simplify karke batate ho na apke video me..thank you
im confused.there are too inlets but where is the outlet?
outlet motor aiega with pipe
Sir aap ne isko बनाने में सिलिकॉन कोन सा लिया है
koi b clear silicon gum chalega
Resibond GP 100 सही रहेगा सर
Already the tank is too small bro for fancy goldfish. You could have used an external filter such as canister or sump. For fancy gold's a minimum 3ft tank is required to keep them healthy and happy.
ok
Beech me aapne video kyu blur kiyi?
wife ka face aagaya tha isliye
Bhai itni mehgi gappy la raha hu but sab mar rahi hai palanted tank me . Heater bhi lagaya hu 26 per . Hang on filter laga hai or 30% water bhi change kar raha hu 2 days me 😢
abi Sardi k mousam me mat lo
@@SyedShah5001 or jo mar rahi hai fish us ko kya karu bhai
Nice❤
thanks 👍🙏
❤❤❤❤
thanks
Allah hafiz 💖
Apne ranchu Kharida hain keya??
yes
I think something is wrong with the filter design
Tell me what's wrong we can rectify it
Even I thought of it but the pump will push out the water in the end back to aquarium overall a good video
@@SyedShah5001 maybe I could be wrong. But I think there should be a cutout for outlet on the other end. Also I’m eager to know how the bottom inlet would work. Waiting for part two.
Down side holes only for reserve water it will reserve water to push water otherside because it will help to push more water towards filter @@kennykenny5273
The top hole should be on the other side
Address or contact of the acrylic cutting shop please bro
Check description
Can Oscar survive in the 1feet tank??
no
😃😃😄
thanks
No sound
ok will check it
17000 views mein sirf 475 likes, logo ko working dekhna hai...
🙃🙃🙃👍👍👍👍
thanks 👍🙏
Fish chala gaya tha aapke ghar ko aap jakar Dekh Kar Le lagao Vaishali parcel Mangamma Chhota Bada a Jaega aap Dekh Ke Lele ko Kabhi let Hai To Parwani video banata na aap vaise hi Jagah hi Dekhkar vaise banate Dekh Kar Achcha Raha to Le lega aapko
ok
#stopvivekbindra
👍
Bharat shrilanka ke bad Mein Chhota Gaya Bada gaya hai ki yah vah karo mat Tum Hi video Banakar
ok
Just waste of money, instead of using acrylic, why don't you use glass, black glass, there's no thing like cost effectiveness 😅,
glass me aisi cutting nahi aiegi holes and cost Kam chahiye to 4mm ka 700 tak aajaiegi with cutting
This is very bad idea
ok
Allah hafiz 💖
Allah hafiz 💖
Allah hafiz 💖
shukriya bhai