I was thinking about choosing between the Sculpfun-s9 or the Atomstack x7. For obvious reasons, the choice fell on the s9. It is also thanks to your films for which I want to thank. Greetings from Poland. Arthur
@@JTMakesItI have the same problem :) I don’t know which to buy Atomstack A10 pro or Sculpfun s10… I watched Yours films and I am inclined on Sculpfun s10. What do You think about this :) I’m right, or I must watch Yours films again :) Greetings from Poland too :)
@@JTMakesIt I know all are nice machines, and S30 already has the air assist. I'm in an indecision because I really don't know if the price difference between them are worth it. example: A10 pro costs 400, Xtoll D1 460, Xtool D1 pro 500, S30 Pro 470.. I'm gonna see them again and make a list of pros and cons.. LOL
The darker the color, the more light is absorbed. It can also cut red, green and yellow, but the cutting performance is reduced. It can't cut white and transparent because light bounces off or it goes through without significant effect. This is because diode lasses work in visible light spectrum. Co2 lasers use infrared light which is basically heat and it "sticks"to all materials
In the video description you will find a link to a written review of this machine on my website hobbylasercutters.com. there you will find photos of all the test results. If you check other posts on that website, you will find test results of all the lasers I have tested so far. All of them were tested with the same patterns and materials so you can compare them directly.
Ho I haven't. The mdf comes in various qualities. Some doesn't cut at all, not even with CO2 laser, some is as easy to cut as plywood. You need to find your own settings. But I would use 300-600mm/min and full power and as many passes as needed to cut through
It says in the product description: Except for the color, S10 Pro and A10 Pro have exactly the same configuration function and value. You can choose the color and name you like.
Hello I'm looking to start it as a profession but I'm confused Which machine i should buy in minimum cost but maximum potential.. and also guidelines how to use it
For a small business, the Atomstack A10 is a great option. But you can also check my video of the xTool D1. For both machines you have a lot of tutorials and insttuctions on how you use it. I recommend using Lightburn software.
@@videoshub3302 Atomstack A10 is better, but twice more expensive. It depends on what you need. Check hobbylasercutters.com for the reviews of both machines
@@anonymous-wx5xu The shipping cost for sending the used machine from Europe to Philippines would be half the price of the machine. It is not feasible to do so.
I have an Atomstack A5 Pro+ and I want to upgrade to a 10W machine , so many choices, With or Without limit switchs? dunno Any Ideas? I have a computer dedicated , and using Lightburn, So the ability to use and HD card isn't important.
Limit switches are definitely worth it. If machine stops mid work or you stop it for whatever reason, you will be able to recalibrate and start from where it stopped
This would show that the limit switches are not precise enough or the homing procedure is too fast. Usually all machines with limit switches are pretty accurate.
Hello..... I have just bought one but I have problem with matching it with Lightburn. The engraver work area doesn't match with Lightburn work space . And as you tested at the begging of the video the alignment of the engraving ,I have problem with that too the alignment was so bad every time I homing the laser head and start over the same engraving its does not engrave in the same place I think that because of the matching issue ... I hope you help me to solve this problem
Yes the machine hits the mechanical limits because it being added 60 mm to the X axis and 10 mm to Y axis When I start the machine, the coordinates of the laser head are taken by the program as the starting point. Suppose that the coordinates of the laser head when I operate the machine are x = 60 mm and y = 60, but the program considers these coordinates x = 0 and y = 0, so I press the home button and write the following code G92 X0 Y0 so that the program knows that these are the coordinates of the home Then start working. But as soon as I finish engraving a specific design and move to another design, the problem comes back and there is also another problem, which is that when I stop engraving due to a design error or the like and go back to work, the coordinates get complicated again, always adding 60 mm on the X axis and 10 mm on the Y axis and that also happens when I press the home button 60 mm for X and 10 mm For Y so I have to write that code again.
Can someone help me out I cannot get the fire button to work on my new Adam stack. I enable it in lightburn 25% but when I hit the fire but it never works.
How do I get an SD Card for my 7X? There was not one in my shipment and it will not work without one.. I was disappointed after paying over $600 for this machine.. I also found out that there was a charge for using some of the programs that are required to use this machine.. I am very disappointed.. Also there were not glasses included with this machine..
This is strange. Did you buy brand new machine? I think that sd card should be included, but it works with any sd card. You can buy it anywhere for ~3$. It works without sd card, I almost never use it. You can see in the video that it is not inserted. Also LaserGRBL software is completely free, but majority of people use Lightburn because it is much better. And glasses should be included with the machine
@@JTMakesIt No there was not a SD card included, and no glasses.. And yes it was a new machine from Amazon.. I tried to contact Amazon, with less than favorable results.. I have tried to use the machine but get a message about no SD card installed.. Can I use a bought card, or is there programs included on the card from the manufacture? Thank you for your reply.. Your video is very good..
@@ThePullnfool you can use empty sd card. Sd card is only needed for offline engraving - running gcode programs from sd card without computer. Otherwise you don't need it. You can even disconnect the display and it will work normally.
@@JTMakesIt Thank you for reply. I´ve tried it with a whiteboard marker and your settings and it doesn´t work. The gold mirror card is just a little bit white at the engraved place. You know how to fix that?
Hi, what would you advise would be a good entry machine for someone serious about using for cutting shapes into plywood/thin wood? Also shapes from metal. Many thanks
I've Just bought one with your coupom. I hope it helps and I like the machine (I've a lot of experience with 3D printers, but I've never used a laser engraver)
The lowest priced Atomstack A10 Pro: hobbylasercutters.com/go/atomstack-a10-pro/ Use coupon code BG66f8d3 to get it for 389$!) Valid only until end of September and for a limited number of orders! The technical review of this machine, where you can find test results of other laser engravers too: hobbylasercutters.com/atomstack-a10-x7-pro/
Hello, the coupon is only for S10pro, I would like to buy an A10pro. Could you have, please, a one valid for A10pro ? Why is today the S10pro like 200usd more expensive than A10pro ? On BG...Many thanks
S10 and A10 are identical. The only difference is in the color of the frame. This is the way Atomstack marks machines differently for each major vendor. The best deal for the S10 here is this : hobbylasercutters.com/go/atomstack-a10-pro/ But you can check other coupons I have here: hobbylasercutters.com/coupons/
Very good review, well done, well thought, over several different materials... Thank you.
I was thinking about choosing between the Sculpfun-s9 or the Atomstack x7. For obvious reasons, the choice fell on the s9. It is also thanks to your films for which I want to thank. Greetings from Poland. Arthur
Thank you for liking the content!
@@JTMakesItI have the same problem :) I don’t know which to buy Atomstack A10 pro or Sculpfun s10… I watched Yours films and I am inclined on Sculpfun s10. What do You think about this :) I’m right, or I must watch Yours films again :) Greetings from Poland too :)
@@adamsotomski3004 I jak się sprawdza scupfun s10?
It can carve copper for pcb?
No, Diode lasers can't mark copper aluminum or brass. You need fiber laser for that. Check my other videos
@@JTMakesIt hello I've comment on your another vid if that fiber laser can engrave the copper
Wow, better and better
Atomstack X20 Pro Diode 20 W Laser is coming shortly :)
what is your recommendation between this model and sculpfun s9? this model hv offline mode though
S9 is less powerful, but better value for money, if you don't need extra features that the A10 has. Both are good engravers in their price range.
@@JTMakesIt hope sculpfun hv upgradable ctrl unit which user can use offline function
Hi do you have the parameters to record the Stanley Cups? Your channel is very good congratulations.
Thanks! You can find all the parameters for various materials on my website. You can find the link in the video description.
can't decide ATOMSTACK A10 PRO or Xtool D1 pro 10w or the
SCULPFUN S30 PRO :(
I have tested them all. Check my other videos
@@JTMakesIt I know all are nice machines, and S30 already has the air assist. I'm in an indecision because I really don't know if the price difference between them are worth it. example: A10 pro costs 400, Xtoll D1 460, Xtool D1 pro 500, S30 Pro 470.. I'm gonna see them again and make a list of pros and cons.. LOL
@@paulonobrega3557 You need to decide which features you want the most.
@@JTMakesIt Just did. I went for the SCULPFUN s30 pro. The air assist with the price won 😀 thanks for the videos
@@paulonobrega3557 good choice! Glad to help :)
May I ask why it can only cut black arcyl? How is transparent arcyl?
The darker the color, the more light is absorbed. It can also cut red, green and yellow, but the cutting performance is reduced. It can't cut white and transparent because light bounces off or it goes through without significant effect. This is because diode lasses work in visible light spectrum. Co2 lasers use infrared light which is basically heat and it "sticks"to all materials
Nice Video again 👍🏼
Can that cut transparent acrylic too?
None of the diode lasers can cut transparent acrylic.
I was thinking of buying one of these machines just worries that it burns the timber do u have any advice
Laser engraving is burning wood? What exactly is your concern?
Do you make a compare sheet for us since you have so many brand laser engraver? It will so great!
In the video description you will find a link to a written review of this machine on my website hobbylasercutters.com. there you will find photos of all the test results. If you check other posts on that website, you will find test results of all the lasers I have tested so far. All of them were tested with the same patterns and materials so you can compare them directly.
@@JTMakesIt Thank you!!
Hi, can you show us parameter how to cut 3mm clear acrylic !!!
You can't cut clear acrylic with any diode laser. you can only engrave it.
have you tried .25 MDF with it? wondering settings
Ho I haven't. The mdf comes in various qualities. Some doesn't cut at all, not even with CO2 laser, some is as easy to cut as plywood. You need to find your own settings. But I would use 300-600mm/min and full power and as many passes as needed to cut through
What’s the differences between that one and the ATOMSTACK A5 M50 ?
A10 has twice the power
@@JTMakesIt thanks!
Hi...Have you tested in gold 18k parts? thanks
No, sorry I am not that rich 😅 but I don't think gold can be engraved
@@JTMakesIt hehehe ok....Thank you !!!
Are there some diference between A10 and S10 pro? Or are the same?
It says in the product description: Except for the color, S10 Pro and A10 Pro have exactly the same configuration function and value. You can choose the color and name you like.
@@JTMakesIt thanks from Brazil that information.
Hola, he comprado una Atomstack A10 PRO (utilizo Mac) y no sé qué programa debo utilizar y cómo conseguirlo, ¿puede ayudarme? muchas gracias
lightburnsoftware.com/
or
lasergrbl.com/
Between Atomstack a10 pro or Sculpfun 30s pro, which is better? Which gives better results? Thanks
Sculpfun. Check my review of the 20W versions comparison
Hello I'm looking to start it as a profession but I'm confused Which machine i should buy in minimum cost but maximum potential.. and also guidelines how to use it
For a small business, the Atomstack A10 is a great option. But you can also check my video of the xTool D1. For both machines you have a lot of tutorials and insttuctions on how you use it. I recommend using Lightburn software.
@@JTMakesIt Thank you for your reply what can you plz tell me which machine is best Atomstack or Sculpfun s9
@@videoshub3302 Atomstack A10 is better, but twice more expensive. It depends on what you need. Check hobbylasercutters.com for the reviews of both machines
Can I just buy one of your laser engraver?...
Link in description
I mean secondhand, one of your used laser.
@@anonymous-wx5xu I mostly sell them locally because otherwise the shipping cost is very high. Where are you from?
Philippines, I just need a starter that is good, hoping you offer me one.
@@anonymous-wx5xu The shipping cost for sending the used machine from Europe to Philippines would be half the price of the machine. It is not feasible to do so.
I have an Atomstack A5 Pro+ and I want to upgrade to a 10W machine , so many choices, With or Without limit switchs? dunno Any Ideas? I have a computer dedicated , and using Lightburn, So the ability to use and HD card isn't important.
Limit switches are definitely worth it. If machine stops mid work or you stop it for whatever reason, you will be able to recalibrate and start from where it stopped
Ich überlege mir auch diesen Laser zu besorgen, meine Frage mit welcher Software und welchen Driver wird zu ansteuern benützt?
I used Lightburn software. No extra drivers are needed.
If the alignment test showed it was not aligned correctly, how would you adjust it?
This would show that the limit switches are not precise enough or the homing procedure is too fast. Usually all machines with limit switches are pretty accurate.
Hello.....
I have just bought one but I have problem with matching it with Lightburn. The engraver work area doesn't match with Lightburn work space . And as you tested at the begging of the video the alignment of the engraving ,I have problem with that too the alignment was so bad every time I homing the laser head and start over the same engraving its does not engrave in the same place I think that because of the matching issue ... I hope you help me to solve this problem
In Lightburn go to Edit -> Device Settings and set the correct working size of the A10 laser.
Thanks for replying but I already set the correct size of the machine
Width 410.0 mm
Height 400.0 mm
Still same problem
@@mohammadmansour8000 Does the machine hit mechanical limit? describe more on what actually happens and what the machine does.
Yes the machine hits the mechanical limits because it being added 60 mm to the X axis and 10 mm to Y axis
When I start the machine, the coordinates of the laser head are taken by the program as the starting point. Suppose that the coordinates of the laser head when I operate the machine are x = 60 mm and y = 60, but the program considers these coordinates x = 0 and y = 0, so I press the home button and write the following code G92 X0 Y0 so that the program knows that these are the coordinates of the home Then start working. But as soon as I finish engraving a specific design and move to another design, the problem comes back and there is also another problem, which is that when I stop engraving due to a design error or the like and go back to work, the coordinates get complicated again, always adding 60 mm on the X axis and 10 mm on the Y axis and that also happens when I press the home button 60 mm for X and 10 mm For Y so I have to write that code again.
I hope I could describe my problem well and sorry for the long comment
Hey, I bought above one S10 Pro, I am
Having connectivity issues to the unit using my windows laptop. Will you be able to guide me?
You should contact their customer support. They know their machines the most
Can someone help me out I cannot get the fire button to work on my new Adam stack. I enable it in lightburn 25% but when I hit the fire but it never works.
But does the laser work normally?
Yes it does but without the fire button working it’s difficult to line up my work pieces perfectly
@@MrJimpurvis DId you enable the fire laser button? forum.lightburnsoftware.com/t/how-to-enable-fire-button/24950
I wanted x20 atomstack testing vidéo soon admin !
Hopefully I will get it soon.
Me too
I would really appreciate if you could share with us your files with the test pattern. That would help me a lot
Check links in the description, you can download my test pattern from my website.
How do I get an SD Card for my 7X? There was not one in my shipment and it will not work without one.. I was disappointed after paying over $600 for this machine.. I also found out that there was a charge for using some of the programs that are required to use this machine.. I am very disappointed.. Also there were not glasses included with this machine..
This is strange. Did you buy brand new machine? I think that sd card should be included, but it works with any sd card. You can buy it anywhere for ~3$. It works without sd card, I almost never use it. You can see in the video that it is not inserted. Also LaserGRBL software is completely free, but majority of people use Lightburn because it is much better. And glasses should be included with the machine
@@JTMakesIt No there was not a SD card included, and no glasses.. And yes it was a new machine from Amazon.. I tried to contact Amazon, with less than favorable results.. I have tried to use the machine but get a message about no SD card installed.. Can I use a bought card, or is there programs included on the card from the manufacture? Thank you for your reply.. Your video is very good..
@@ThePullnfool you can use empty sd card. Sd card is only needed for offline engraving - running gcode programs from sd card without computer. Otherwise you don't need it. You can even disconnect the display and it will work normally.
How can I engrave 301 metal (reflective) with the Atomstack A10 Pro?
Spray a thin layer of some black paint on the piece which is easy to remove. Then engrave with slow speed (200-400mm/min and full power.
@@JTMakesIt Thank you for reply. I´ve tried it with a whiteboard marker and your settings and it doesn´t work. The gold mirror card is just a little bit white at the engraved place. You know how to fix that?
@@lucr.912 hola...saves tengo la misma duda...al final pudiste grabar en metal trasparente?
From your point of view sculpfun vs x7 atomstack which one is to go for
Sculpfun(299$) has best price performance ratio. A10 Pro is better, but much more expensive (589$)
Has anyone had a problem getting the fire button to operate ? It’s enabled at 25% but it still doesn’t work
Does the laser work normally for engraving? Maybe you need to "enable fire laser button" setting in Lightburn
Hi, what would you advise would be a good entry machine for someone serious about using for cutting shapes into plywood/thin wood? Also shapes from metal. Many thanks
For serious use, the A10 or xTool, if you have lower budget then the Sculpfun S9. None if the lasers can cut metal
@@JTMakesIt Thank you kindly, I actually went ahead and pre-ordered the A20. Fingers crossed!
I've Just bought one with your coupom. I hope it helps and I like the machine (I've a lot of experience with 3D printers, but I've never used a laser engraver)
Thanks! You are going to have a lot of fun with it
i'm not sure that the google link works
Which one?
@@JTMakesIt the one you use :)
@@Babyfasty I don't have any google links in description
@@JTMakesIt oh ok, it's because you tell us to check the description links
@@Babyfasty Fixed it. You said google and I didn't know what did you mean, but the link was for goggles/glasses :)
The lowest priced Atomstack A10 Pro: hobbylasercutters.com/go/atomstack-a10-pro/
Use coupon code BG66f8d3 to get it for 389$!) Valid only until end of September and for a limited number of orders!
The technical review of this machine, where you can find test results of other laser engravers too:
hobbylasercutters.com/atomstack-a10-x7-pro/
@@usa1 These are the same machine with same laser module and frame but a different name for some reason. The S10 is also an identical machine.
@@usa1 s10 is also gray I think and it ships with customs taxes included
Hello, the coupon is only for S10pro, I would like to buy an A10pro. Could you have, please, a one valid for A10pro ? Why is today the S10pro like 200usd more expensive than A10pro ? On BG...Many thanks
S10 and A10 are identical. The only difference is in the color of the frame. This is the way Atomstack marks machines differently for each major vendor. The best deal for the S10 here is this : hobbylasercutters.com/go/atomstack-a10-pro/
But you can check other coupons I have here:
hobbylasercutters.com/coupons/
@@JTMakesIt thanks alături, S10pro is from CN warehouse, A10pronis from EU....that s why I need it. :)