Key Fobs/Wristlets using Faux Leather

Hey everybody,
For this tutorial, I will be showing you how to put together a key wristlet/key fob holder.
For this project, you will need
-Faux leather (can be purchased anywhere, Amazon, Michaels, Hobby Lobby, Joann’s, Etsy, etc)
-Key fob hardware (I purchased mine from Amazon, it came with the tool): www.amazon.com...
-Cutting machine or scissors
-Heatbond if you want to attach faux sheets together
I hope you enjoy this video. Thank you for watching.
Follow my Instagram/Facebook page:
@upatmidnightcustomdesignsllc
Check out my website:
www.upatmidnightcustomedesignsllc.com for your custom shopping needs.

[@MadeByTriniLena]

Love the heat & bond sheets because I was thinking of sewing the double sided stripes, great info

[@ShellieGeiger]

This was the best step by step video that I have watched so far and I have watched ALOT. Thank you !!!!!

[@CraftingMadeEasy]

You're welcome

[@MadeByTriniLena]

They look so good

[@davidfuller215]

I always cut leather face down. Seems to cut easier and clearer.

[@MakingwithMarilyn]

Love your laugh and your easy going personality! You make videos enjoyable to watch:)

[@CraftingMadeEasy]

:) Thank you

[@lindagoodman4080]

I always glue the tops together you can't see it once the key fob is in place and it makes it much easier to place the faux leather handle

[@gerrywolfe2549]

Thanks for the tutorial & tips.

[@cherylchaney9220]

Thank you for a great tutorial! I can’t wait to try!

[@rkarmen1000]

Thank you, very useful tutorial

[@debrasiemen6705]

What a great video...I’m excited to try this out. My hubby bought me some faux leather....I love your videos!

[@MadeByTriniLena]

Appreciate this video, I’m trying to add these to my list to sell🧵

[@sylviapineda6717]

love your Music - you make it seem so easy- But will try it with out a Cricut- Buy hand- thank you - Palm Springs, Calif-

[@amberpedersenpedersen1826]

I love you're videos. One thing I found is when you cut the leather fuzzy side up, you don't have so much fuzz on the mat and it adheres to the mat better.

[@BeatitudeSoul]

Thank you! Great vid!

[@princesslane2009]

I noticed another lady brushed on a dab of glue on the ends before adding the findings. I just subscribed!

[@CraftingMadeEasy]

Thank you. I'll try that technique

[@Beautywithapurpose4]

Hi I love how the key fob look. I just started making them. I didn't like how thin the fux leather was. I am going to try the heat bond to bond two together. Thanks for sharing

[@CraftingMadeEasy]

You are so welcome!

[@crafty_mamaw5220]

You can put heat transfer vinyl on the underside also to make it look more finished

[@mariadufault183]

Adorable

[@eboniejackson9712]

Great video

[@glendaj6624]

Love the tutorial. Do you think if I stitch around it will ruin it?

[@CraftingMadeEasy]

I would do a test run. But if its good faux leather it should be ok

[@jovirami1731]

Thank you 😊

[@sisterrose6836]

I like to use Super Glue to line up the Faux Leather before clamping it, so that it doesn't move on me.

[@heathershandcraftedsoaps45]

Love the colors in that faux leather bundle pack! Do you remember, by chance, where you got it?

[@CraftingMadeEasy]

Amazon. Here is the link. www.amazon.com/gp/product/B07YS7LV3B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

[@heathershandcraftedsoaps45]

Thanks so much!

[@choclitsuga]

Mine has a grove that I lay the fob on to make it easier to close

[@sisterrose6836]

I also take off the Ring, so that it doesn't get in the way of clamping it shut. Then I replace it after it is clamped.

[@mamatosh05]

Good idea. Thanks.

[@sisterrose6836]

@@mamatosh05 You're quite welcome!

[@tamaraarhue7707]

I'm about to order these materials. Adding a new item to my business. Thank you for the tutorial. But what type of heat bond is that?

[@CraftingMadeEasy]

You're welcome :). This is what it is called. I brought it from Joann's. HeatnBond Ultra Hold Iron-On Adhesive.

[@lorij7788]

I love my Cricut but I find cutting the strips with my paper cutter is better. Cricut waste so much material. Great video though!

[@giselleesparza7535]

Hi! So basically I just move the blade in Housing A to Housing B? I’m just confused if I need to buy a deeper blade

[@CraftingMadeEasy]

No you would just change the blades, in the same housing area. You could just use your regular blade just select deeper cut.

[@suenicorogers5905]

Ok so I put my hardware in the tool and then press onto the leather

[@CraftingMadeEasy]

Yup. Make sure you press hard.

[@MadeByTriniLena]

How much would you sell these for sis?

[@jssnoopy125]

I used a new mat and my leather is now sticky. How do I get rid of the stickiness off the leather? I have tried cleaning it with a cleaning wipe didn’t work

[@CraftingMadeEasy]

Did you try spraying it with some alcohol?

[@jssnoopy125]

No but I will try that. Thanks

[@CraftingMadeEasy]

@@jssnoopy125 ok. hopefully it works.

[@hkathie87]

This is off topic but do you sell shirts or svg to the one in video

[@CraftingMadeEasy]

Yes I sell shirts and SVG's.

[@hkathie87]

@@CraftingMadeEasy Do you have/sell the svg for your shirt

[@zoeyfrasier3582]

How do I change the rectangle size and length on the mobile app?

[@CraftingMadeEasy]

You click the edit button with the ruler and pencil and type in the size you want.