Hydraulic Log Splitter BUILD Part 4 - Wedge Linkage
Вставка
- Опубліковано 24 лис 2022
- Building a hydraulic wood splitter from scratch. Fixing a bought hydraulic cylinder that had a mount welded on crooked. Fabricating the linkage and linkage mount for the wedge height adjustment system. Making pins for both the log loader table and wedge moving cylinders. Welding and bolting up everything and getting the splitter to the point where it's ready for it's first test run. But came short a couple of hydraulic fittings and couldn't hook up every hose needed to make it run. But I'll get there shortly. If (fingers crossed) I get it running properly it still needs a proper tow bar and stand. Also wood rack and conveyor-ish thingy. But all of that next time. Stay tuned!
My log splitter build series: • Log Splitter Build
My other videos: ua-cam.com/users/DonnDIYvideos
Support me on: / donndiy Follow me on: / donndiy
#donndiy #homemade #logsplitter
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter - Авто та транспорт
More fabrication videos on ua-cam.com/users/DonnDIYvideos
Ah the old bucket of random nuts and bolts..we all have them and they save us all from time to time.
Very cool project.
Man.... The thing that I love about all your builds is how well thought out, executed and just STOUT everything is. This splitter is going to last 10 lifetimes... Mini Me is going to pass it down to his grandkids for sure!
Manufacturing companies will build this to last a season or 2, Donn builds to last 10 generations, I love it
@@zzzires5045 I bet he'll keep this thing inside when he isn't using it, or at least covered. I keep both of our splitters inside and the one didn't even have primer or paint on it for the first 15 years of it's life, still was in perfect shape, just surface rust. About 5 years ago (maybe longer) I gave it a make over, cleaned it up good and primed and painted it. Should be good for a while. I think the key to is keeping it out of the elements and UV, so don't leave anything outside if you can help it.
Overkill never fails.
My question is: why build a log splitter when he built an entire wood processor a year ago? That included a log splitter!
This one is to bring onsite directly I guess🤷♂️🤔
Donn is the Best! 👌🏻🎅🏻🇫🇮🇫🇮🇫🇮🔨🔧⚒️
His old lady likes his tool !
Hän ei oo suomalainen
@@konstalehtineva5215 Tiedän, Virosta on, mutta pukki on suomesta!
Так вот чего мне не хватало сегодня вечером! Нового видоса от Donna)))
Лайк однозначно! За труды и за неисчерпаемость идей! 👍
Привет из Перми, РФ. 🤝🤝
You are great engineer.
You are a great engineer congratulations I envy you
Dont know why people troll this guy, he does amazing work
Cool video as always
Excellent job Donn, getting closer to the finished line. Sure is exciting . Thanks for sharing with us. Fred.
Hello 🙋♂️from the Netherlands🇳🇱 .
thanks for the video Donn .
Sincerely, Hollandduck 🇳🇱🦆
Спасибо за твой труд и твои идеи не пропускаю не однаго видео
I'm liking how this looks! It's gonna last about forever, barring some fool with a cutting torch. The lifting wedge is genius; it'll save a ton of work when it's in action. Thanks for sharing!
Coming along very nicely !! Can't wait to see this split some wood !!👍👍👍Very nice fabrication skills !!
At the point of testing and to be continued... damn the hook! 🤣😂 I'll be back to watch!
You got to admit that had to be fun making this splitter! Nicely done.👍👏😤
Well done 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Some mighty fine engineering.
A splitting cross made of Hardox is a good idea. It could last a long time. 😁 Good Job Master. 👋
Been watching the entire build. Damn you are one talented guy!
Your mixed use of abrasive grinders and plasma cutter is mind boggling.
I often wake up at nights to wonder this. Current winning theory is sheer laziness to pull and hook up the burner handle.
I have seen people test the rams with air ,, that way if wrong you don't have a oil mess when you have to change something Great work so far ,,
Bud I hate it when you leave me hanging! Looking good!
what a cliffhanger! GJ
Gold hands! Bravo!
Hello Donn good job well done
Great video
This is pure UA-cam gold 🤩🫡
Cheers from Norway 🇳🇴 👍🏻 😀
Kin awesome. Next please.......
Much respect.
19:06 This part may cause some problems: It pushes the splitted wood up which will push the wings of the wedge, if the wings are not strong enough, they may bend because of this or the wood gets jammed under the wings.
Maybe it will work without problems, but in my view it would be more fail-safe if the wood has at least 1-2 cm to expand downwards, so it doesn't get stuck under the wings of the wedge.
Well done 👍
@Mr Koges sir I live in Pakistan, but it's my dream to see Russia and meet you Thanks and Regards for inviting ❤️❤️❤️❤️❤️😍😍😍😍😍😍😍
Sorry for my poor English
esperamos el siguiente video ya q el trabajo es muy bueno y profesional
Всё к чему стремилось человечество развивая свои технологии, это колка дров, молодцы европейцы.
Awesome 👍.
I see like everyone else, Donn works off the corner of his bench where the vise is. Occasionally moving the other "important" stuff out of the way to make room for larger projects.
I was just reading a news article about your President Alar Karis running into Hillary Clinton at a bookstore here in Ontario Canada and then I open UA-cam and see this video.
What a happy coincidence.
Your linkage engineering is fantastic. That splitting wedge looks like it will work amazingly.
Hienoa työtä👍
ALWAYS awesome videos and builds Donn. I've built a few splitters and I think you'll find that you need a 4 inch ram ,minimum. Keep up tge GREAT work
You sound so imperialistic.
Here you can also learn about the material and strength after processing.
Thank you. Have a nice day.
Excelente……..!!!!!!👏👏👏👏👏👏👏👏👏👏👏
Selamat siang bang ,,sukses atas pekerjaannya ,slm dari indonesia
Trying to like the video twice
A Transformer log splitter. Going to take more power pushing them logs into the blade, VS a blade pushing into the log! To split it > Going to need a crane to move it.. Your are a DAM GOOD WELDER 👍 Better than me. I'am a good welder
well done! On the knife, the side wings are too long, a large shoulder is obtained, and if a load falls on one of them, then the vertical knife bends. I did not shorten much on my wood splitter. sorry i use google translator
There is a brand Rayco that makes a really nice unit with the 4 way splitter on it and adjustable height. RAYCO Log Splitter DieselFords
The video is 14 years old.
The way they built it is the best I have seen and as far as I know they still make it the same way and its stout and very strong. Its a beast of a machine.
Unless i missed something, that should be regular steel (the blade), if it is, consider adding a metal strip at the very edge that can be hardened. You could then use one of those coil heaters to heat the edge before dipping it in oil. One of the best blades i had on any spliter was made in this fashion. Not my idea, bought from a fabricator near me. I've run about 40 full sized trees through it, and it still retains a decent edge, haven't had to sharpen it once despite the quite acute angle. It's also considerably less work on the small 3.5 hp Honda with a cheapo pump that came with the og frame.
The blades look like they are Hardox, the replaceable edge of excavator buckets. that stuff can tear through rocks so I doubt wood will give it trouble.
Ash yes, the venerable box of random nuts, bolts and washers. No good shop is complete without one
wow man!!!! good job!!!! congrats
18:35
I too have bunch of random bolts, nuts and washers, but in my case it's bucket filled with them.
very little use of the cnc plasma on this build? I´ve noticed all of the comments on other projects that they miss the angle grinder but the cnc is such a awesome tool! Maybe 50/50 work so people still can se that things can be made with easy tools but also that they really need their own cnc plasma. ;)
sensational 🇧🇷🇧🇷🇧🇷🇧🇷
Im waiting for more good luck, when you repair pto drive in timber trailer?
thank...
Лень двигатель прогресса😀💪👍
I split 4 chords of wood with a splitting maul during part 1-3.
Gj 👍 respekt
I hate being their going through the box of bolts knowing you've still got matching ones and usually go through it twice before you find what ur after, I have a 6in ram for my own splitter project hope to shove the whole log in one so thanks for inspiration
I was thinking something similar about the "junk" box. What I've done is put the matching nuts (and washers if I have them) on the bolts they fit. That way I only have to find ONE item 😄
@@michiganengineer8621 one item that's seized or fused together 🤣👍
@@crazymtbrider Yeah, if I didn't think to use WD-40 before threading the nut on LMAO. Most of the time I didn't
@Donn DIY you not build on of these before?
Kool
0:10 don't you just love it when that happens? I mean, we're in 2022, and even assuming this wasn't made in this decade, it's still made after the industrial revolution and the concept of jigging exists and they're still not using it. It's like alien technology for them.
👍👍👍👍
I don't know if it would make sense, but have you considered using hard (rigid) hydraulic lines when you finish the build?
👍🤝👏Как всегда!
Just a question out of curiosity. I understand that the cutter part will be moved hydraulically as well. I've worked a machine where the cutter itself is manually risen and lowered. The thing is that it can be basically only risen without using your arms to move the already split wood from under the blade. Have you thought how to address that problem?
Gunna bend. Just saying.
Nice job tho. Always fun making your own stuff. Have you figured out flow rates, cylinder speeds? May want to put orfices in that cylinder to slow it down.
👍👍👍
21:47 So it is an automatic spoiler that comes up when you drive really fast?
Tubli töö nagu ikka! Tahaks juba töös näha. :D
Hey man, how do you deal with metal splinters in your fingers? Does wearing gloves completely prevent them?
3:00 why not use the cnc plasma ?
А что плазморезом не пользуешься?
👏👏👏👍
Any wood splitters i have used had the control's moving in the same direction as the cylinder travel, and the operator stood opposite the lifting arm, so the arm becomes a table. didn't you build a wood conveyor out of an old hay conveyor? maybe that was someone else..lol
This guy is amazing!
I am curious as to why he uses his grinder to do most of the cutting instead of his plasma. Does anyone know?
I'm faster with angle grinder than with programming the cut file on the computer 🤣
@@DonnDIY Hi Donn, I was referring to using your manual Plasma Cutter. YOu are definitely fast with the grinder and very accurate. I thought it might be because the grinder leaves a cleaner surface.
На Самом интересном месте! Нельзя же так! 😟
0:37 с таким люфтом угол проверять((( Странно...Фольгу может стоило проложить?
is that the transsteel 2700 3phase Mig ?
It has been awhile since the youtube algorithms have suggested your videos… didnt you make a log splitter already? Anyone know why he is making a new one?
Ufdah!…hope that wedge is thick enough?! Tried telling a fabricator that once and he said it’s 1/2” T-1 it’ll be fine. Yeah no. He bent it all up.
👏👏👏🧿
Why aren’t you using your CNC cutting machine?
I'm not getting this wedge design yet............
Вы из какой страны? У меня на канале тоже есть подобное сооружение. У Вас очень хорошо получается!
Beef up the axle. Not heavy enough
На самому цікавому місці...
Где ЧПУ плазма?
🦾🦾🦾🦾👏🏻
Unfortunately there are a lot of design flaws in this project....Plus the materials used are inferior..
Kas sa rendid enda keevitus gaasi või kuidas
Ostsin ballooni välja ja käin vahetamas kui tühjaks saab.
@@DonnDIY ja palju ballooni välja ostmine oli ja kui uuesti täita lased palju siis läks
Hetkel hinnad muutunud vist, aga tookord oli balloon väljaostmine üle soti, vahetus/täitmine jääb argoonisegu puhul 80+ euro kanti.
However nice to see! 🔩