Installed the LOUDEST Titanium Exhaust on my 996 Turbo!
Вставка
- Опубліковано 27 бер 2023
- My Porsche 911 Turbo gets a much needed aftermarket X-Pipe exhaust. How loud is too loud? Asking for a friend....
Top Speed Exhaust: topspeedauto.com/porsche-996-...
Merch - www.boostedapexdesigns.com every $5 gets you entered to win a new Milwaukee 3/8 high speed impact kit. (giveaway ends 4/30/23)
Instagram - / matt13ross
Patreon - / boostedapex (early access to videos!)
Channel Perks: / @matt13ross
Sound/Music for videos: share.epidemicsound.com/dge6e8
Porsche Parts: Site contains affiliate links for which I may be compensated
HPS 5.0 Brake Pads: amzn.to/41PhG5N amzn.to/3EOfiSy
IPD Comp Plenum: amzn.to/3m1pWyM ebay.us/3thcOg
74mm Throttle Body: amzn.to/3m0HGuw ebay.us/T8VmrF
Atoto Wireless Carplay Stereo: amzn.to/3EtocoE
Stereo Wiring harness: amzn.to/3RxeR4l
Dash kit: amzn.to/3HzTJ8S
Alcantara Shift Boot: ebay.us/mLjsAB
LED Signal Relay: amzn.to/3EYun4t
License Plate LEDs: amzn.to/3V1fYdj
ABS Plastic Sheets: amzn.to/3UYpCNw
Fog Light LEDs: amzn.to/3E8AMbN
Turn Signal LEDs: amzn.to/3O8YMA0
High Temp Vacuum Hose Kit: amzn.to/3MHnpDi
Fuel Injection Hose Clamps: amzn.to/3CN9Bmp
Radium Fuel Pump Kit: amzn.to/3MiRRUb ebay.us/uZAFOj
Big thanks to Rennline for supplying awesome parts too!
2 Piece Rotors:www.rennline.com/2-piece-roto...
SS Brake Lines: www.rennline.com/renn-lines-s...
Short Shift Kit:
www.rennline.com/gt3-short-sh...
Motor Mounts:
www.rennline.com/rennline-tun...
Carbon Fiber Arm Rests:
www.rennline.com/996-porsche-...
Carbon Fiber Door Sills:
www.rennline.com/carbon-fiber...
Shift Knob:
www.rennline.com/rennline-alu...
e-sku-p71-60-59/
Transmission Mounts: www.rennline.com/urethane-tra...
Garage Upgrades:
Retractable Pressure Washer: amzn.to/3EgZmH1
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Quick Jacks: amzn.to/36gkqBc
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Retractable Air Hose Reel: amzn.to/3D6tZyh
Welding:
AHP 203XI Tig Welder: amzn.to/3zH7Zs4
Yeswelder Plasma Cutter: amzn.to/3Iz6xLt
Yeswelder LYG-Q800D Helmet: amzn.to/3FgB9zO
Klutch Welding Table: amzn.to/3r4qqTK
Tillman Tig Gloves: amzn.to/3f7ErL4
Tig Torch Holder: amzn.to/3qbhWex
Deburr Tool: amzn.to/3tiBLSO
Other Tools / Gear I use:
Vevor Ball Joint Press Kit: amzn.to/3ktsntF
Vevor 3 Ton Floor Jack: amzn.to/3kXkH2S
Husky Toolbox (white/black): amzn.to/2V1p9Av ebay.us/oYNmGv
Tekton Swivel Ratchets: amzn.to/3uLXdNs ebay.us/3MHh5k
S.W.A.G Band Saw Table: amzn.to/3ku3Mkh ebay.us/NiEypw
Hanging Extension Cord Reel: amzn.to/2RebLXQ ebay.us/8Yv1X3
Universal Step Drill Bit Set: amzn.to/3ag12TJ ebay.us/4IjhVr
Magnetic Vice Jaw Inserts: amzn.to/2ZmUXPs
Cordless Tools:
Milwaukee Right Angle Grinder: amzn.to/3BwUgFj ebay.us/bRXqAz
Ryobi 1/2 Impact: amzn.to/2UG03Yg ebay.us/3FvRVy
Ryobi 3/8 Power Ratchet: amzn.to/3yek85O ebay.us/4YviJx
Ryobi 1/4 Impact: amzn.to/2UDRVHD ebay.us/11aLy0
Ryobi Angle Grinder: amzn.to/3gnoCAQ ebay.us/W59ocA
Ryobi Drill: amzn.to/3DhyWV1 ebay.us/rqIhti - Авто та транспорт
Sounds good! Personally, I think the stock exhaust tips filled the bumper in better than what you have at the moment.
If it's behind the bumper....who cares? No one sees it.
He’s not done. He’s going to get tips. No one would just leave it that way.
@@stellanti I'd like to think so. That looks garbage as it is!
Not done, still need to decide on tips.
@@matt13ross What about the 'normal' OEM 996 TT/GT2 tips, they are oval but follow the outline of the hole in the bumper.
Next Video: Tail Light Tint Removal and mad skids with the E36! Keep up the great work!
The titanium exhaust sounds good! Love that you can hear those turbos! Now you need to get some decent exhaust tips :)
That's the plan!
I LOVE ITTTTT! The turbo noises all the time is beautiful! exactly what i was specting from a exhaust like that. now it sounds as it should be
cant wait for the next video driving it finally, racecar sounds
Matt, your tenacity is something but wow are you making progress with the Turbo!!!! Congratulations for sure!!!
I’m dying to know what is wrong with that window. Another good video and more progress sounds great 👍👍👍
Next video!
Love your videos especially the Porsche ones. Exhaust sounds awesome. Turbo noise sounds good.
The car looks and sounds fantastic! Well done! You are nearly done with this amazing project! Well done! What a great car!
Sounds amazing! I would definitely recommend getting some oval tips since i also dislike the "fake" double look tips.
Sounds amazing I need one for my 996tt. Can’t wait to hear the drive and drone verdict
@Matt13Ross It sounds heavenly! It sounds glorious! Well done! 🤩👏👏👏👏👏
Man your videos are getting better and better. Awesome edits and content always 👌
I appreciate that!
Don't melt your fresh rear bumper with out the tips.
Theres no real better option to factory X50 tips. Just get them polished up nicely and they will look the part
Much needed and sounds great! Don’t forget to pick out some awesome tips
Sounds great!!!! Turbo sounds are top-notch!
Yessirrr was waiting on the exhaust vid and this did not disappoint
Sounds Spicy..Big Improvement!!!🏁👍🏽
Damn, love the exhaust sound. As Speed Racer said, “it sounds beefy Pop”.
Definitely do all the oxygen sensors while they are out. Save the trouble now and figure out what sends a code afterwards.
Funny thing, my turbo’ed Miata with an aftermarket market race cat will get a code when my wife drives it, she doesn’t get the car hot enough to get the cat to work.
The Porsche is really coming together!
New exhaust sounds killer, leagues better then the old one 🤘🏻🤘🏻
You are one happy boy! Great job getting to this stage.
I had no hope for this vehicle. To see it like this now is fantastic.
I vote black oem oval tips! Keep it simple and clean
Yes Matt yes!!! I’ve been waiting for this video
Wow! Definitely sounds better than the fabspeed. Probably best 996 turbo I've heard
Hi Matt, the 996 now sounds as well as looks great!
The stock tips look OK to me, but if you're not happy with them, how about some black oval tips?
Having had a 997 Carrera 4s myself, I'm loving this Porsche content! 👍👍
Thanks! Yea I'm thinking some simple tips.
Way better sound bro. The fab speed sounded kinda idk ricey to me. It just didn’t sound like a normal exotic car. With this new exhaust the sound matches the car. Nice 👍🏼
It sounds amazing now. Love the turbo sound
Does have great turbo noises!
The infamous tick noise. Flow 996tt owner, still keeps me on my toes 😅
Looking and sounding class Matt
Can't wait for the interior video ! Definitely wish this was my car 😅
Massive sound improvement plus saved weight and probs picked up at least 20hp. Win win win
Wins all around!
My god that’s night and day! Went from atrocious to amazing. And those turbos WIND!
Not going to lie, I'm loving this series.
Again excellent choice of music. 👌👍
Sounds great! Sounds a lot less constrained and more aggressive.
Yo that sounds pretty mean! So much better, and I am using tiny headphones that look like they are from 1992. LOL I going to have to put my good headphones on and give her a listen. They always sound better under load though.... Can't wait to hear that.
Awesome vid....as always. I feel like bow it badly needs tips! :)
Those OEM exhaust tips were the optional X50 ones and I agree they're ugly. If you get the stock 996 turbo tips they look much better
Great turbo sound!
Agreed!
Yes dude! Finally new exhaust, suspension up next???
Not next but coming, yes.
Matt, try Acetone/ATF 50/50 mix for seized, rusted bolts. It works wonders and its cheap!
The titanium exhaust sounds awesome.
I've heard of that tip before, but haven't tried it yet!
Quick jacks for the win!
Good job, man!
I would look and see about getting some tail lights and some more modern headlights. Car is looking so good and fresh. Those will give it a nice touch
Eventually
That sounds much better!
Great job man, awesome exhaust. Make sure you install the o2 sensors before you take it out on the road, will mess up the fueling.
The post cat O2 sensors don’t affect fueling.
@@matt13ross Yes your right mate, just the pre cats, totally forgot about that, brainfog day lol.😀
Sounds amazing! That's going to drone worse than the old one though.
I'm diggin this build....I just want to see you go full send and drop the motor and rebuild it...I dont know or remember if you said the actual miles on the car but I believe it's worth it....your already in to deep on it...might as well huh...love this build and your vids...keep up the great work...😊
150k I believe
Full engine rebuild requires special tooling for the timing which isn't cheap. To have a shop do the work it's probably going to be $20k for the cost.
Should reset ecu after fitting new exhaust so ecu can re learn long and short term fuel trims. 👍🏻 disconnect battery 10 mins is an easy way.
Sounds great!
Looking good sounding good 👍
sounds mega bro titanium exhaust is defo the way to go
Curious if you considered a Fister exhaust for the car. Really enjoyed the bypass with mine. New subscriber here 👋🏻
Wow. Sounds way better. Has that high pitch porsche scream now.
Sure does!
Sounds so much better Matt cheers for changing that awfull exhaust out 👍
I have the Fabspeed on my M96 engine and it sounds amazing. Must be a Metzger thing. Honestly though when I put the OEM cats back on it ruined the sound. So they might be fine if you straight pipe them. I’m going to DM you on IG to get more info on those 90 O2 adapters. The new exhaust sounds great! Love that turbo sound!
my 996TT also sounds like a vacuum cleaner and drones like hell with that same fabspeed exhaust. I believe its the MaxFlo, right? I wanna go to a catless xpipe
@@Cant_Frag that’s what I did. Check out my channel to see me demonstrate the complete Fabspeed setup on my bored out 4.0 996. Including the x-pipe.
Mine had high flow cats and it didn’t sound good lol
@@matt13ross Bummer, good thing I didn't waste my money on buying those.
@@Cant_Frag I have a 3" catless xpipe setup on my 997.1 turbo. It also has resonators and helmholtz tubes to eliminate the drone. Without cats it will drone unless you have both resonators and helmholtz tubes
You need to change angle on the clamps so they don’t get caught on something. Just a little advice from an old tech.
Yea I noticed that later
Turbo is whistling like a k700 lol, Love it!
That turbo noise is the sickness!!!!!
Nice work.
Oooooooh, sounds well nice !
Much better!!!
Thumbs up from England
Kinda surprised you didn’t put anti seize on the new exhaust bolts lol
Maybe later
Sounds nice!
Love your channel so much man. Appreciate all the effort you put into the shots. But I don’t think the overhead drone shots are adding anything. Could pretty much repurpose the same ones every time. And I know they are a pain in the ass to do. What would be so cool though is a go pro shot of the driver POV. Set it and forget it and let it run and use some footage from that. Would be awesome.
I enjoy doing the drone shots. Honestly when I do POV, no one watches lol.
@@matt13ross makes sense! Especially if you love it. If I had a drone I’d do it too ;) keep up the good work brotha.
Thanks! But you're right, the drone shots are a PITA lol.
Everytime I watch one of these videos I think "that guy has to be from Pittsburgh with that accent" but apparently folks from Maryland sound the same?! Great videos - appreciate the gumption.
I'm from neither lol. Central PA.
@@matt13ross ahhhh I figured it might be PA!
buy the turbo s tips, similar to the c4 but are shorter, that is what i fitted to mine, looks miles better
I'll look into those.
Thanks!
So kind, thank you again!!
Got a Cargraphic exhaust on my 996 Turbo - think it sounds great although not Ti its only SS
I've never heard of that one.
There’s only one exhaust for those cars and that’s a Kline exhaust, sounds great and no drone at all ….. tried many off them.
I have the same exhaust but no cats. Wish I had the cats. Cheers.
Big like from Italy
funnily enough, your not supposed to let the car warm up by staying stationary, as it says in the porsche manual, it was the same for my 986, due to it being a flat engine they recommened you warm it up by driving it straight away and keeping the revs below 3k rpm !
Let’s go dude that sounds so dope!! I think you should go for some nice black tips on the exhaust!
I think so too.
You should use Liquid Wrench or some other penetrating oil. WD-40 is water dispersing. Not the right stuff for rusty hardware.
Makes me so nervous because I just had a lot of work done to my 996 including a fabspeed exhaust with headers installed. I pick it up next week.....:yikes:
Maybe you have a newer Fabspeed exhaust?
I picked up an '03 with a titanium muffler-less exhaust, though it seems to have street legal high flow cats and anti-drone tubes on it. The exhaust has its moments but out on the freeway the droning is just so so bad.
Off topic here, but are you still going to order the new 23' ZR2 Colorado? I was a fan of the full size ZR2 mod videos
Possibly but in no rush
Matt. Where did you get your lifts? I have a twin post in one bay but it would be nice to have another
The quick jacks? Available on Amazon: amzn.to/3BZRIR8
Don't forget to mention the DP extensions, and/or running catless is for OFFROAD USE ONLY.
You wouldn't want the EPA to come a knockin' & then hit all your cars with fines/tows/violations while they're there.
It's one thing to defeat emissions systems, it's a BIG no-no to talk about it & share how-tos with others, especially if you make money off it. (Ask all those performance shops that got raided by the EPA)
Yes, this is all just for off road and TESTING purposes!
Matt would you mind sharing some info on how the 180's are connected? How big of an opening between the two ? I'm building one now and wondering the shape and size of the opening between the two.
I think all the piping is 2.25 inches. The website for Top Speed may have better information.
may be an unpopular opinion but I think you should try to find a set of oem turbo twists, think they'd look sweet.
Agreed, or have the current wheels refinished in silver, not digging the Matt (..) black. And next on the list THOSE HEINOUS TAILS they hurt my eyes :(
Tails were not my job. Will be fixed eventually. May change wheel color too. I love the wing though
@@matt13ross I know you already said it in the video, but please pull it forward on the to do list ;)
Wing goes with the front bumper imho and I don't have a problem with either of them. Car doesn't have to be 100% OEM obviously, it's already come a long way from your starting point :)
Liked it after i saw the title
Matt, this upload is just exhausting. It's really starting to come along and look really nice. I'm glad you got that junkie looking intake off it and the new exhaust on. Now, you just need some upgraded turbos, intercoolers, clutch, and a tune. Don't forget the passenger side window regulator and the rest of the interior. Then maybe later on when it's making 700-750whp, you can do an AWD delete and really have something a lot of fun and terrifying. But after all the grief, the boys have given you in the comments it's really starting to come together. Kudos, man, tons and tons of kudos, and congratulations.
I agree with your mods MINUS the AWD delete. I have a RWD V8 car and it’s nice having one that’s a little different with AWD.
had a terrible day in my day job cause of other mechanic that fubar a honda fit... nice to open my pc and see this video! tks
Still think your custom job exhaust for hood stack on the 2.8l is more impressive. 😂
😂 😂 😂 what a great memory!
glad you broke up with the zr2, This content is way more enjoyable to watch.
Agreed
Yesi!!!!!
We need @obsessedgarage to help get a fellow 'Matt' a permanent scissor lift.
Need a bigger garage first!
No more smacking noises, please pick a diff effect otherwise love your vids!
That sounds 10x better and you got some weight shaven off. Every ounce counts.
No Anti-seize on the O2 sensors?
😊just look at it.😊
Did you put this exhaust on without a drop of antiseize on any of the slip joints or bolts?
Yes
@@matt13ross why do you hate yourself? Knowing that engine, the exhaust is going to need to come off soon enough, putting it on dry is how everything seizes up. Just put a layer of copper antiseize on the slip joints and bolts. It’ll smoke a bit at first, but you’ll be able to take the thing apart.
Not a bad idea. I've never had good luck with any sort of product like that on hot exhaust parts though.
@@peterborak3695 I've taken my exhaust off twice since installing it without any antiseize and it hasn't been a problem at all.
muuuuch better !
Can you do a "what's it's cost until now" video?
Once it’s closer to finished.
Sounds the tits. Currently in the process of cutting apart my fabspeed and putting an x pipe in the middle.
Sounds like a proper Porsche now. Great choice.