All the consumables and wear and tear parts are really in expensive my friend. I've seen many people getting ripped off by dealers by changing unnecessary expensive parts. If you learn to maintain your motorcycle by performing Oil changes, it is really easy on pocket.(Fuel price is an exception). You can contact me for any help or suggestions. Thank you.
My Himalayan is 4 years old and I have changed the cone set Bearing 5 times. It's ok. Apart from that one problem vehicle is awesome. Puts a smile on my face everytime I throttle 🙂
The BS4 and up variants are much reliable when compared to BS3. I still find Burnt O2 sensors and few problems in motorcycles from my circle. Problems are mitigated but not Eradicated.👍👍
@@ranjithreddy1910 but for the love for your motorcycle you ll just let go off it. That's barely a problem after a point of time right ? Because we get used it and we are ready for it. 😄
@@winstonisghostrider Yeah. It's just a part of the ownership experience. Sir, Where are you from? Feel free to contact me on instagram. I'm available as raja_ranjith_reddy
What will happen if I don't change cone set bearing, is there any harm to me or my bike( Suzuki Access 125) if I don't change cone set as soon as possible ?
Brother maadhi Kuda Sangareddy naa bike hero karizma R Naa bike running lo One time one time Front Tyre And Bank Tyre Front Tyre automatic Light side Going And Same Time Back tyre Right side going so please tell me problem please please
I have done only 4500 kms on my bike and it's new but due to big pot holes many times I had accidentally jumped my bike now the a sound and a feel in handle is coming when there are big bumps I'm confused either the coneset is gone or it is needed to be tightned my bike is brand new and it's my fault if it is broken ☹️ plz reply guys
I've RE stealth black 350 BS6 I've ridden 900km I don't know is it a issue or not still just wanted to confirm when I apply sudden break like fully applied there will be a sound from somewhere around cone set like tuckkk** one single time even when in humps
Get it checked by a reliable mechanic somewhere outside and ask him to identify the problem. Then take it to the showroom and ask them to replace it under warranty.
@@ranjithreddy1910 one last question Today I went to re service mechanic said your forkscups totally gone its cost 2500... This much price difference will be there..?
When he said, Himalayan isnt expensive... my money purse started crying 🤣🤣🤣
All the consumables and wear and tear parts are really in expensive my friend. I've seen many people getting ripped off by dealers by changing unnecessary expensive parts. If you learn to maintain your motorcycle by performing Oil changes, it is really easy on pocket.(Fuel price is an exception).
You can contact me for any help or suggestions. Thank you.
thank you bro was searching for a video like this and you and one another guy were the only ones who posted
Kiraak ra💯🔥 All the best!
Nicely explained.
Good attempt to explain. I liked the video. Very simple language and easy way. Thanks man. Best Wishes 💐
Very nice explanation, anyone can understand easily, thanks brother from Dhule, Maharashtra
Awesome. Thanks man🎉
Thanks for the tips very helpful!
Great video simple to understand thank's!
Very useful information bro keep going
That was helpful 😊. great 👍
Thanq bro... U have explained very clearly
Nice video love from nepal 🇳🇵
Thank you
I have replaced the front wheel bearing but getting creeking sound when i move the bike forward or backward
nailed it bro :)
Nice one bro 👌
My Himalayan is 4 years old and I have changed the cone set Bearing 5 times. It's ok. Apart from that one problem vehicle is awesome. Puts a smile on my face everytime I throttle 🙂
The BS4 and up variants are much reliable when compared to BS3. I still find Burnt O2 sensors and few problems in motorcycles from my circle. Problems are mitigated but not Eradicated.👍👍
@@ranjithreddy1910 but for the love for your motorcycle you ll just let go off it. That's barely a problem after a point of time right ? Because we get used it and we are ready for it. 😄
@@winstonisghostrider Yeah. It's just a part of the ownership experience. Sir, Where are you from? Feel free to contact me on instagram. I'm available as raja_ranjith_reddy
Bro are you using RE bearings or NTN bearings, thank you in advance
Very good details, thanks dear, 🙏
👏👏 nice vlog it's really useful..thank you RRR...😍
Thank you bro grate info.👍
bro really helpful ❤️🍺
Good information Thanks bro ..
Is there any possibility of the cone set making weird vibrating sound? In slow 20 25kmph speeds?
great bro. thanks
What will happen if I don't change cone set bearing, is there any harm to me or my bike( Suzuki Access 125) if I don't change cone set as soon as possible ?
Keep it up
Genius
Brother maadhi Kuda Sangareddy naa bike hero karizma R Naa bike running lo One time one time Front Tyre And Bank Tyre Front Tyre automatic Light side Going And Same Time Back tyre Right side going so please tell me problem please please
Valid information bro, thanks.
Thank you sir
Please subscribe and share
pls let me know where to buy original engine oil
Is it same for interceptor?
Good - 1 bruh need more and do some Volg in telugu because some might not get u nice work and. Keep sharing
I'll do that soon buddy.
Thanks for your suggestion.
Bro in my himalayan, suddenly today I felt that while riding my bike feels like skidding without doing anything only. What can be the problem?
Which location is this bro
I have done only 4500 kms on my bike and it's new but due to big pot holes many times I had accidentally jumped my bike now the a sound and a feel in handle is coming when there are big bumps I'm confused either the coneset is gone or it is needed to be tightned my bike is brand new and it's my fault if it is broken ☹️ plz reply guys
Same problem….. any update ?
what are the symptoms of the riding quality when the bearings are not working properly
nice bro, my new bs 6 is facing right side leaning imbalance problem,
is this can b the same cause of it?
Could be or even forks could be bent. Get it inspected by a technician at RE DEALERSHIP
Good explanation Reddy garu ❤️
Thank you Reddy garu.
@@ranjithreddy1910 bro fz front wheel lo phat phat ani sound vasthondhi kani running lo tarwata raadhu just start chesaka oka 2 mins anthey ..
@@naveenreddym6222 Anni check cheyali bro. Chudakunda em cheppalem.
I've RE stealth black 350 BS6 I've ridden 900km I don't know is it a issue or not still just wanted to confirm when I apply sudden break like fully applied there will be a sound from somewhere around cone set like tuckkk** one single time even when in humps
Get it checked by a reliable mechanic somewhere outside and ask him to identify the problem. Then take it to the showroom and ask them to replace it under warranty.
It might be abs working
Nuvu thopu Anna ninnu evaru apaleru 😂🌞
sometimes it happens ante.
Hi bro nice video....I was using bs4 himalyan can you tell me price of cone set bearings...?
I don't know the exact price for the himalayan. But for the interceptor it is close to 850rs and it should be same for Himalayan
@@ranjithreddy1910 850 for single one...? I had handle issue front coneset
@@Ganesh-ec2gp yeah 850rs for the 2 bearings set.
@@ranjithreddy1910 one last question
Today I went to re service mechanic said your forkscups totally gone its cost 2500... This much price difference will be there..?
Bro ur rear wheel alighnment is wrong.Also check chain tighting.
Atcha2 srry2 ...tamilllaa.....
Telugu and I'm from Telangana.
Aa aaa aa karne se achha hindi me bana lete.