Best Drywall Tape for you on remodels and repairs
Вставка
- Опубліковано 13 жов 2024
- Best drywall tape for you on remodels and repairs. In today's video I talk about drywall tape that's best for different drywall projects. Paper drywall tape, fiberglass mesh drywall tape and FibaFuse tape. Let me know in the comments which drywall tape you like the best? Thanks so much for watching! -Paul
If you're new to the channel? Please consider Subscribing to see more of my upcoming video's. / @paulpeck
☑️Below in my Drywall and Painting Shop are the tools and products I talked about in this and use in all of my videos: (This link is an Amazon Influencer Affiliate store link where I'll earn a small commission if you make a purchase at no additional cost to you). ▶ www.amazon.com...
~~~~~~~~~~~~~~~~~~
My last four video uploads:
Drywall Pro Trick to Repair Any Size Hole in the Wall
• Drywall Pro Trick to R...
How to Repair and Match Old Texture!
• How to Repair and Matc...
You Probably Never Heard of this AMAZING Drywall Tape!
• You Probably Never Hea...
AMAZING New Drywall Tape Perfect for Patching Your Ceiling!
• AMAZING New Drywall Ta...
~~~~~~~~~~~~~~~~~~
My latest video series:
Here's Part 1- How to Repair Drywall Tape Joints on a Ceiling:
• How to Actually Repair...
Part 2: How to mix Hot Mud and Apply to Ceiling Crack Repairs
• How to mix Hot Mud and...
Part 3: Ugly Drywall Ceiling? You Can Actually Skim Coat It New Again! • Skim Coat Your Ugly Dr...
Part 4: This is a MUST when Repairing Drywall!
• This is a MUST when Re...
Part 5: The Ultimate Texture for Ceilings!
• The Ultimate Texture f...
~~~~~~~~~~~~~~~~~~
Checkout my Live Streams Here:
• Paul Peck DrywallTube ...
~~~~~~~~~~~~~~~~~~
Skim Coat Over a Painted Popcorn Ceiling- Skim Coating Tips and Tricks: • Skim Coat Over a Paint...
How to Skim Coat Ceilings for Beginners Tutorial: • How to Skim Coat Ceili...
How To Skim Coat a Room in 30 minutes!! Skim coat drywall tips and tricks: • Skim Coating a Room in...
*(Part 1)How to skim coat using paint roller trick- Getting rid of Knockdown Texture- • How to skim coat using...
How to Repair and Skim Coat a Wall after Wallpaper Removal Tutorial Playlist: • How to Repair and Skim...
How to Skim Coat Ceilings Step by Step Guide for Beginners: • How to Skim Coat Ceili...
Water damaged ceiling and wall project- Diy drywall repair series: • Water damaged ceiling ...
~~~~~~~~~~~~~~~~~~~~~~
*How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks- • How to skim coat a wal...
#PaulPeck #DrywallTube
Here's some more FibaFuse drywall tape video you not going to want to miss! ua-cam.com/play/PL7Ww-LhWbB0Esnlmt8-N3842WrooTexU_.html
I'm so grateful that I came across your channel. I had lost hope with fixing up my home. I'm low income and I'm a single mother of three daughters. One with autism. The oldest in college. You sir have brought back my enthusiasm for my home. I am mechanically inclined and because of you I now can repair my home myself. Thank you so very very much!!!!! You are truly appreciated!!!!
This is so awesome Roma!🙏 Let me know if you run into any questions along the way. Thanks so much for watching and commenting my friend!😎 -Paul
I just bought fibafuse yesterday for a ceiling repair that I'm working on. 😀💪 All credit goes to your how to videos! Thank you! 🙌
That’s awesome Eliza!👏🏻 I really appreciate your feedback. Let me know how you like the FibaFuse. Thanks so much for watching!😎 -Paul
Thanks! Great advice and love all your videos. Renovating a bathroom and started with the paper tape because the "anti mesh" crowd videos I watched. I got humps and bubbles. Took it off, scraped off all the paper tape, sanded and primed with Kilz. It was only two short seams but still a PITA. Lesson learned. Got the Fiba Fuse and will be using it going forward. It is a tiny bathroom but this is my first real experience with a start to finish drywall job. Mistakes were made but that is how you learn. Hands down you have the best tutorials. They cover the fundamentals and are current. I was racking my brain searching the interwebs about drywall to backer board transition with a corner bead. Your video was extremely helpful. You are a credit to your craft.
The man speaks truth. The only thing I don't use ever is the mesh because of strength. But this is spot on. Listen to this guy
Same here, mesh tape has no use anymore.
I appreciate that Matt!💥👊🏻 Thanks for watching and commenting! -Paul
I loved watching this video. Very informative. I enjoyed watching until the end. Super big channel award goes to you for sure. New friend here & rang the bell.
I really appreciate that Lisa!👍🏻 Thanks so much for watching and subscribing my friend!😎 -Paul
Good tip with the eye protection-I love Fiba Fuse, but I keep forgetting eye protection. Nearly all of my work is ceiling repair, so this is a thing I need to remember...
HI Paul, I switched to the Fibafuse a couple years back. I switch my paper taper this past year to Strait-flex in my corners. I like both better than paper. I acutely had my first fail with Fibafuse. I think it was due to the heat, or lack there of. It blistered when I primed it, only on the ceiling. They have not installed the heat yet, so I run 2 portable heaters while I am there, 1 on an extension cord. So I can only run 1 at night, due to having 1 circuit live in the area. The temp is in the 60's when I am there but dropped into the 40's a night.
I feel like a bit of a fool for not thinking of it myself, but better a smarter fool than just a fool. Your idea for "sloppy rerolling" or "folding over" the mesh drywall tape was brilliant and soooo simple. I fold over regular tape, literally, so I can find the end. But I always have to cut the foldover. The mesh tape is all that much worse. What a great idea to just leave a little slop over the side so you can grab that (like when using blue painters tape). What a great idea.
Thank you for taking the time to educate others. Especially when it is on how to do it **right**. Sorry about them, but the only thing I can think about the people that down vote your videos is that they are jealous. You can give them a million dollars and they will bitch about now having to pay so much tax. Almost every one of your videos is usually helpful to me and I am 20 years experienced in remodeling.
I tend to use hot mud a lot, and never have had an issue with cracking on mesh tape with bucket mud, but now I know mesh is really for hot mud or when seaming cement board. Maybe my stuff cracked after 15 years.
There are more hybrid tapes. Like paper with holes to bed better. I use that over plain paper but it is more expensive. On ALL the crappy tape jobs I have had to scape and retape, they always used paper and bedded too thin. I would guess with not enough mud behind the tape as well. I just know I have to peel it all off and redo what would have been so much easier to do right the first time.
I am the kind of nut that uses Durabond hot mud on the seams. Then hot mud bed the tape after the Durabond hardened. Put another layer on (often hot mud but not always), then hot mud skim coat the wall for the best appearance. Although I do cheat and use bucket mud on skim because it is less hassle. I think hot mud actually sands with less dust though. After priming I will go back and fill whatever small imperfections are left so I have a flawless wall. It is a lot of extra work though.
paul for president! ive learned to use paper tape for corners. interesting. i look forward to learning more with the peck! woop woop
Peck 2020! Haha...😂 Thanks so much for watching and commenting man!💥👊🏻
Found you through Tree Trimmer's live chat. We love channels like yours that teaches us something. Such a great way to learn new things. Thanks so much for sharing!! I'll be checking out more videos for sure.
Right on man!💥👊🏻 I appreciate you stopping by. Thanks so much for watching and commenting! -Paul
Nice vid Paul. Best one I've seen on tapes
Thanks for sharing Paul........gonna try some Fibafuse soon
Hey there Rick!💥👊🏻 I think you’re going to like it for sure! Let me know. Thanks for watching and commenting my friend!😎 -Paul
I grew up doing thin coat plaster and 3 coat plaster so we only use mesh tape. Works great!
aweslome channel paul ,,i did a bit of dry walling in my time but your channel is very in depth and a big help
I'm a drywall finisher and one of the cons with the FibaFuse that many people may not know is that it is bad about cracking in the winter. We almost exclusively finish new construction, and have had houses that aren't climate controlled in the winter crack at the joints with the FibaFuse. It's great in summer months, but not so much in the winter. My theory is that the pre-mix mud taking longer to dry in the winter as opposed to summer is what does it, for whatever reason. We went back to the paper tape bc of the cracking in the winter.
Correct me if I'm wrong but your issue seems like the application temperature is the culprit not the tape.
Fold over the mesh tape. Wish I picked that trick up sooner.😁
Haha Scott... Now you know!👍🏻 Thanks so much for watching and commenting my friend! -Paul
Paul, Drywall Jeff from Minnesota !!
Just wanted to contact you regarding Fiba Fuse tape and you were spot on.
Flat taping repair areas is unbelievable, it just disappears but don't see how it can be used on inside corners.
I'm old school like you 25+ years of doing this.
I may buy a new banjo for fiba fuse and keep my old reliable for paper.
Just finished a small commercial project with lots of patching and fiba fuse was amazing...still a learning curve but just an amazing product.
Love all your videos & learning loads , Thank you 🌷🌷
Thx for ur vid Paul. Was watching it at Home Depot 😁. I have a santa fe knockdown and have 3 long cracks in the ceiling. I scraped what I could and then then put screws at the joists. Just put down a coat of primer and will wait a few days to tape and mud with mesh and 45 min mud. Just a little nervous when I go to match the texture. Thx for ur vids sir.
Right on man!💥👊🏻 sounds like you’re doing a great job! Here’s a playlist of skip trowel texture videos. Which is very similar to the Santa Fe texture. ua-cam.com/play/PL7Ww-LhWbB0HN1TIHb-wEZAcqKeRw0ti4.html I hope this helps. Let me know if you run into any questions along the way. Thanks so much for watching and commenting my friend!😎 -Paul
Good reviews on the tape. Safety always. Goggles, the dust mask. You want to be in the game for a long time.
Another awesome video! 👏 great tips 👍
I really appreciate your feedback!💥👊🏻 Thanks so much for watching and commenting!😎 -Dad
Hi bro 👏🏻 Fantastic content as always 🔥
Thanks for this video. I am guessing that the Fibafuse does alright in the auto-taper and banjo?
Right on Ahoda!💥👊🏻 Yes, the FibaFuse works great in the auto tapers and banjo! Thanks so much for watching and commenting! -Paul
Thanks For Sharing Love Your Channel!!
Right on James!💥👊🏻 Thanks so much for watching and commenting my friend!😎 -Paul
we built a few houses recently and one of the subs used fibafuse in the corners and also on the seams. the corners have shown tear marks after a year in a few rooms. the rooms that were paper taped in the corners are fine. that fiber tape shreds apart tooo easily in my opinion for corners.
Always great and informative content brother! Sharing you out tonight
Hey there Ed!💥👊🏻 I really appreciate the share and you stopping brother!😎 -Paul
Paper for corners. I was checking out the fibafuse tape and was surprised how easily it pulls apart, not much stronger than a paper towel. I wonder what the shear strength is between the 3 types of tape. My money would be on paper.
I bought an old house in the sticks. And I'm learning some things the Hard way. Like WHY the previous owner covered All the walls & ceiling with Texture! This place is a mess. I'm stuck here, so I gotta do whatever I can. Little by little.
I am starting with this bathroom ceiling, and hopefully will conquer this technique.
Thanks for your tutorial.
Please reply to my other inquiries about How to deal with the small holes :/
Paul great videos where do you get the 20-30 grit sand you used in the skip trowel ceiling? I see you are in Florida I am as well. Thanks
Hey Paul awesome video 💜
Hey Angel!💥👊🏻 I really appreciate that man! Thanks so much for watching and commenting my friend!😎 -Paul
Remember to crease the paper tape as you go. Do not roll out the length then crease it, it will curve. I always apply the mud in the corner, place the uncreased tape into the corner and use the mud knife to push the crease into the corner and you won't get any ripples
Hey there Andrew!💥👊🏻 Great tip!🔥 Thanks for that!😎 -Paul
Nice, I got to try the fibafuse. Still a bit pricey and I'm old school too, I know the paper tape works. Don't want to go around in a couple years fixing a bunch of cracks! Great Vid
I paid $4.28 yesterday for the fibafuse. Not too pricey and I live in California. 👍
@@youaremylight2172 Not bad. I will have to take another look. Thanks
Hey there Brent!💥👊🏻 I hear ya. But, I guarantee you’ll love FibaFuse after using it a couple times. It hasn’t ever failed me! Thanks so much for watching and subscribing my friend!😎 -Paul
That was a great deal Eliza!🔥
When using the mesh tape on sheetrock that has a gap, fill in the gap first then immediately lay the mesh tape on top of that then light lay it down with the mud knife and you won't get bubble coming through the mesh,
Another great tip Andrew!🔥 Thanks so much for watching and commenting my friend! -Paul
Mesh tape is made so mud can go through it. Mesh tape fails on a wet surface, the adhesive will not stick and odds are it will detach. Use Fibafuse and you'll throw mesh tape away.
Can’t argue with that Kris!👍🏻 FibaFuse rocks!🔥
@@krisone63 mud goes through mesh yes, but ever notice air bubble coming through on the gaps. This trick is for gapped areas only. And fibafuse is super good and easy to use and very easy to remove on repairs. Just mentioning to people who still have a full roll of mesh. Lol. I've always had a hard time removing mesh tape on a repair. That stuff just give me a hard time every repair job so I know it works too.
Hi Paul , is Fibafuse ok for repairing cracks on plaster walls ?
Nice vid man
I really appreciate that man!💥👊🏻
Great advice always:)
Hey there Barbara!💥👊🏻 I really appreciate your support! Thanks so much for watching and commenting my friend!😎 -Paul
I tried the fibrefuse for the first time and didn't like it. When i laid the hot mud on the joint and tried to lay it i didn't really see it aborarding the mud. I found it left a bulge. I thought it would sit flater on the drywall and ended up pulling it off and going back to the mesh tape.
Paul, you mentioned cracking seams if you use regular fiberglass tape and regular premix compound. If you have a crack under that scenario, how do you approach that repair?
So I’m assuming I should use paper tape for my unfinished basement not mesh tape
FIBA fuse is great thanks for bringing it to my attention..when people flat tape what's the point of flat taping I know you do it than caulk the corner from ceiling to the wall but cant you just caulk it without flat taping??
i watched your vids for skim coating popcorn ceiling but i have a textured ceiling in a 70s era house where they used plaster to texture.. the ridges are quite dense could the same technique still be used because it seems the trowel would skip the surface quite a bit. appreciate the reply if possible!
Yes, just don’t thin down the joint compound. Keep it thick. Then apply light pressure when smoothing out the skim coat.👍🏻 I hope this helps. Thanks so much for watching and commenting!😎 -Paul
Smashed the like button!
Paul, what would you say to someone who has tried both types of tape for cracks at the corners of doors that seemed to have recracked later? Is that a bad repair or house possibly still settling?
Hello Mr Paul!!! New friend!!!! From blood x live happy Friday
Thanks!😀
I removed an archway wall to open up two rooms, leaving a gap in the drywall in the wall and ceiling. Have you done a video showing how to best fill the ceiling gap so it's a smooth transition where is not obvious a wall was once there?
Heyy great video, very informative with info I’ll need in the future. New fam here 🔔
Might sound like dumb question. What is hot mud?
Hay Paul i did a repair in my wall 2 mouth ago and use mesh tape and all purpose mud and it cracked all ready how do i fix
it now do i remove old tape and mud ....and what hot mud do i need. thank you
Why does it crack with regular mud ?
Thanks for sharing Godbless
Thanks so much for watching and subscribing my friend!💥👊🏻 -Paul
I checked out the fibafuse in store today. Holy hell, INSTANT itchy hands. I guess I'm sensitive to that stuff... Disappointing, it looks like good stuff
New fam here
That’s awesome Ruby!👍🏻 Thanks so much for watching and subscribing my friend!😎 -Paul
😎🛠️😎🛠️😎
was my 1st question to hard for you to answer ???????????
👍👍👍👍👍👍👍
Great I did not know this existed. Good bye paper tape.
I hate fibafuse my skin is reactive to the shit I weather just use regular mesh
Hi how u doing Dropping a like and a follow I'm for RUNNY'S channel ❤👈
Awesome!💥👊🏻 Thanks so much for watching and subscribing my friend!😎 -Paul
🏃♂️🏃♀️🔥🔥💪💪
Right on Jeremy!👊🏻😎
#DrywallTube
#Drywallatube
I appreciate that Jim!💥👊🏻 Thanks so much for watching and hash tagging!😎 -Paul
@@PaulPeck You're welcome, Paul. I sent a link to your channel and a couple of your videos to a contractor who needs to improve their drywall and painting skills.
#DrywallTube