Love the vid! However as a DIY VCDS is a little bit expensive for me, ive seen obd2 scanners such as obdeleven which can access modules but that one requires monthly payment.. Any cheaper substitute? Thanks!
Hi ! I would like to know what kind of cables should be used for the front doors to connect the two logos. Should different cables be used for the back? I understood that the tip entering the mode is different from the back
I checked this old video and it seams I made an error. On Passat CC: - for the front doors connect red to 18 and brown to 19. - for the rear doors connect red to 6 and brown to 18. We will do a tutorial for the rear doors very soon.
I have an OBD 11 with the pro plan. Can I use that to code in? The lights if so, how do I do it? I have looked for a while, but cannot figure out how to do it with OBD 11 I have an OBD 11 and these lights I am not able to install due to not knowing how to code them in, please help
I honestly do not know. If there aren't any tutorials out there for this make and model I wouldn't bother. Also some viewers found that this doesn't work on newer Tiguans.
Am încercat să montez același lucru pe un tiguan model 2018, dar nu funcționează în pinii pe care i-ați folosit voi, la mine nu are pini scoși la 18-19. Posibil sa fie diferit.
On Ali Express it says it is compatible with : VW Teramont 2017- VW Touareg 2011-2019 VW CC 2009-2019 VW T-ROC 2014-2019 VW Arteon 2017- VW Phideon 2016-2019 VW Sharan 2012-2019 VW Magotan 2007-2019 VW Passat 2005-2020 VW Golf 2010-2018 VW Sagitar 2006-2017 VW Tiguan 2010-2017 VW EOS 2008-2015 VW Scirocco 2009-2017 VW Jetta 2006-2014 VW Touran 2016-2018 .We did not have the chance to install it ourselves on scirocco so I can't say for sure. Thank you for watching.
Great video. You included all the steps. I’m gonna try it soon on my 357 CC (RH drive).
Thank you for your comment!
@@TheDIYWorkshop2020all done. Thanks for a great tutorial!
Though I found it easier to remove the door panel from the top.
Thank you ! I'm gonna order some and try it soon
Great!
Multă treabă 😊
Great video guys. Where did you get the diagnostic software from ?
You know how it works, you can find a lot of stuff online. I can not recommend our ways :)
Can you do this on the rear doors as well?
Yes you can, but you will have to search for other tutorials on youtube. We haven't had the opotunity yet.
Love the vid! However as a DIY VCDS is a little bit expensive for me, ive seen obd2 scanners such as obdeleven which can access modules but that one requires monthly payment.. Any cheaper substitute? Thanks!
You can find cracked versions of VCDS super cheap. Multi brand diagnostic tools can 't do this.
Hi ! I would like to know what kind of cables should be used for the front doors to connect the two logos. Should different cables be used for the back? I understood that the tip entering the mode is different from the back
O să facem un tutorial și cu activarea pe spate săptămâna asta. Am presupus că ești român după user.
Hello, does It mean all doors need to connect 6 and 18 also and rear doors? Thank you for your answer
I checked this old video and it seams I made an error.
On Passat CC: - for the front doors connect red to 18 and brown to 19.
- for the rear doors connect red to 6 and brown to 18.
We will do a tutorial for the rear doors very soon.
@@TheDIYWorkshop2020waiting for your new videos :)
Bravo, keep it up guys!!!
How can i do it, if i dont have the VCDS? I only have USB versions.
You need a diagnostic tool specially designed for VAG. Sorry
Link to where you bought the lights and wires from ???
You'll find them on Aliexpress
I have an OBD 11 with the pro plan. Can I use that to code in? The lights if so, how do I do it? I have looked for a while, but cannot figure out how to do it with OBD 11 I have an OBD 11 and these lights I am not able to install due to not knowing how to code them in, please help
I really don't know how to do it in OBD11. Try joining an OBD11 Facebook group. Maybe someone there can help you.
hello does it work for passat cc 357 2011?
Before buying the lights check the specs as they should give a list with supported makes and model.
@@TheDIYWorkshop2020 Thank you
@@TheDIYWorkshop2020 I meant whether these harness connectors are the same in the pre-facelift Passat CC?I'll be doing it in a right-hand drive car.
Would this work same for the Volkswagen Scirocco?
I honestly do not know. If there aren't any tutorials out there for this make and model I wouldn't bother. Also some viewers found that this doesn't work on newer Tiguans.
Am încercat să montez același lucru pe un tiguan model 2018, dar nu funcționează în pinii pe care i-ați folosit voi, la mine nu are pini scoși la 18-19. Posibil sa fie diferit.
Foarte posibil. Mulțumesc pt informație. Cineva a întrebat dacă merge la un Sirocco dar chiar nu am încercat.
I did it on front doors ,but on rear side plug is different , how to connect on rear ?
I did the same thing
Check the description . I left a link to the tutorial for the rear doors. Or enter this one ua-cam.com/video/ruFMeoJuPMo/v-deo.html
It's the same think for Scirocco ?
With mk6 golf plateform
On Ali Express it says it is compatible with : VW Teramont 2017- VW Touareg 2011-2019 VW CC 2009-2019 VW T-ROC 2014-2019 VW Arteon 2017- VW Phideon 2016-2019 VW Sharan 2012-2019 VW Magotan 2007-2019 VW Passat 2005-2020 VW Golf 2010-2018 VW Sagitar 2006-2017 VW Tiguan 2010-2017 VW EOS 2008-2015 VW Scirocco 2009-2017 VW Jetta 2006-2014 VW Touran 2016-2018 .We did not have the chance to install it ourselves on scirocco so I can't say for sure. Thank you for watching.
Salutare! Esti din Bucuresti ? As vrea sa montez si eu aceste lumini pe un golf 7 :D
Suntem din Călărași. Sorry! Sunt destui în Buc care te pot ajuta.
Work for a tiguan 2015?
Someone said in a comment that it didn't work on a 2018 Tiguan but we haven't tried it yet. Sorry !