Ford Focus LED Interior and Exterior - How To Install - 3rd Generation 2010-2016
Вставка
- Опубліковано 7 чер 2024
- Ford Focus LED lights for Interior and Exterior -Whole Installation process of 3rd Generation 2010-2016
Find it here:
Standard: goo.gl/xXFTUi
Premium: goo.gl/K85BWW
This guide is compatible with all 3rd Generation Ford Focus
2010, 2011, 2012, 2013, 2014, 2015, 2016
We cover installation of mirror lights, dome lights, reverse lights, parking lights, etc.
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
Direct Product Link:
Standard: goo.gl/xXFTUi
Premium: goo.gl/K85BWW
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our UA-cam Channel. It's nice to know our customers and friends care!
00:00 - Introduction
01:10 - Front Map LED Installation
03:32 - Rear Dome LED Installation
05:06 - Vanity Mirror LED Installation
07:13 - Foot Well LED Installation
08:26 - Trunk LED Installation
09:32 - Reverse Light LED Installation
12:43 - Parking Light LED Installation
15:31 - Before/After Highlights
15:41 - Outro
⇢ Subscribe: / precisionled
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
#fordfocus #ford #focusford #fordfocus2016 #fordfocus2022 #fordfocusledlights #ledlightsforcar #carledlights #precisionledlights - Авто та транспорт
Thank's you!! only video i found about it.
Thanks for watching!
Perfekt genau das habe ich schon gesucht.
Glad to hear!!
Good job! Helped with my 2012 Focus S!
Glad we could help!
Super professional, nice!
Thanks!
Great video! Thank you.
Thanks for tuning in!
Excellent Presentation
Thank you for the support!
Thank you!
This guy pro ! 👏
Thank you verry Good
Thanks for tuning in!
thanks a lot!
Thanks for watching!
just order mine, I hope I like them.
We hope so too!
muchas gracias!!!!!!!
De nada!
Thanks bro
Thanks for tuning in!
I have some red interior lights at drivers feet and between rear mirror and roof light in my 2011 Focus. Are those lights at foot department same as shown in the video?
What bulb did you use to change the T10? Premium 730 what? I didn't get that last part
Do you have video ford escape 2018?
What kind of leds are the ones in the vanity mirror?
For Focus 3 Titanium 2014, what kind of lights do u have in front?
My 2012 focus se already had led dome lights I didn’t know that they changed it on the newer ones
Hi, do you know where I can order a replacement dome light for a 2016 Ford Focus see hatchback? I looked for the one mentioned here, but can't find it online. Thank you very much in advance.
Thank you very much.
Yes, the dome would be a T10 bulb fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
You have a couple T10 LED bulbs listed on the website. Which one should I pick if I want to replace the courtesy parking light on my Ford Focus?
This would be the best T10 bulb for your parking lights: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Please, be sure to adjust the quantity to 2.
Are you using the same T10 bulb for the parking light and dome lights?
Yes, that is correct, both the parking and dome light would use the same T10 6SMD LED bulb.
Hola tengo una duda.
No perjudica en nada si sele pone mucho led al auto.
Tengo un focus 2012 se
I have a Ford focus tdci 2 generation year 2014 . I can substitute all originally halogen lights and install leds lights ?
Yes, that is absolutely correct. You would want to install one of the kits linked in the description of the video.
do you have an LED kit for the headlights on a 2014 Focus SE? Thanks
Thank you for your interest. Yes, we do have LED headlamps that are compatible with your 2014 Focus, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
Does everything work with the 2014 SE editions color changing? Will they change color when you click the button to do so?
If, by color changing you mean changing from like white to blue to red or something I would figure not considering these are generally a white light bulb if I am not mistaken... However, through various companies that sell light bulbs for vehicles, you can get light bulbs that are say blue or red LEDs in them and would then turn your interior for instance a blue color or red color or whatever the light bulb color was...
So does everything installed in this video work in the 2016 ford focus se 201A edition?
Yes, everything shown in the video is compatible with your 2016 Focus SE 201A. You can find a direct product link in the description of the video.
Which option kit did you use? Crystal white or cool white?
We used the 6000K Crystal White color for this video.
Do these bulbs dim like the incandescent ones do or is it different?
Yes, our LEDs are indeed designed to dim. They will act exactly as your halogens do.
Hello Friend. Can you make a video tracing the halogen lamps of the Focus mk3 (2015 Brazil) sunshade and replacing them with led please? Thanks !
If we can find the same model out here in LA we definitely will! Thanks for tuning in!
Hello Friend. Mine is a Focus 2015 SE Hatch, however the sun shade uses another led model here in Brazil. And I don't think this LED model comes from the factory with a yellow halogen lamp.
Thanks for this. Seems like the dome lights for the 2014 titanium are different. No twist out bulb, looks like a circuit board? Any ideas how to change them?
It sounds as though your are explaining a stock LED light, which you cannot swap as it is soldered to a chip and board.
PrecisionLED - thanks, appreciate the reply
Yeah the stock ambient lighting on the Titanium is not replaceable but the rest are the same as in the video
Unfortunately not true. The Titaniums had interior LED’s stock from the factory that were soldered to their circuit boards. Referring to the dome and map lights here, NOT the accent lights. The lights they are selling here will only work if your car did not come with LED’s from the factory. S and SE’s came with incandescent bulbs that are swappable. And regardless of your trim, if you have a moonroof, you likely have the stock LEDs that can not be changed out here.
what did you do for the high beam lights? did you keep amber as the color?
Yes, we do keep the high beams halogen, as upgrading the highs to LED is not very popular.
is this similar for a mk3 with the bi-xenon upgrade? the turning lights still appear to be halogens
may know where can get the tools any recommendation ???
Of course, you can find the tools here: www.precisionled.com/professional-trim-tool-set-3.html
Hola. que precio tiene esta bombilla t10 led?, gracias
Here is a direct link to the T10 with pricing details: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
whats the difference between the standard and premium option?
The new Premium 360 LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 360 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 360 LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior LEDs are backed by our lifetime warranty.
Is there a set for a ford focus st 2018
Here is the correct kit for your 2018: precisionled.com/ford-focus-hatch-premium-led-interior-package-2012-present.html
How do you take off the license plate bulb to replace with LED?
The license plate bulbs are stock LED, which you cannot replace as they are soldered to a chip and board.
What about turn signals and the break light?
We actually do not advertise turn signal LEDs as they would hyper flash when ignited.
Hola, te hago una consulta. Se cambio la luz de baúl y las luces de cortesia de los espejos laterales por led, pero cuando se entienden, titila intermitente.
Que puede ser?
Hi, you need to install Canbus LED in order to avoid flickering. All of our bulbs are Canbus equipped for this very reason. Here is a link to the trunk/vanity bulb we used for your convenience:
precisionled.com/premium-t10-canbus-6smd-5730-led.html
@@PrecisionLED muchas gracias!
the lights for the front don't cause any "light out" errors?
No, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.
PrecisionLED thanks.
My 2012 Ford Focus doesn't have the twist for the bulb like on this one so I do not know how to remove it
Which Trim Level do you have?
+PrecisionLED SE
+PrecisionLED hey do can yall guys make a video on the 2013 ford fusion titanium?
Erick Orizaba pojsvhxr
What's the specific size of foot well led?
The footwell would use the T10 LED fitment.
I know it says 2012-2016 but will it work for 17 ST?
Yes, the kits linked in the description are also compatible with your 2017 ST.
Do your kits come with one dome light or 2?
Our Focus comes with a single dome LED. However, if your vehicle has 2 dome lights, you can absolutely purchase a second.
+PrecisionLED what about the parking lights?
The T10 LED bulb type would be used for the parking lights, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
will they fit in 2011 focus
Thank you for your interest. Yes, the installation, and kit linked in the description, is compatible with the 2011 Focus.
What are the bulb size for the 2016 Ford Focus Se Hatchback?
What light specifically are you inquiring about? There is a wide variety of LED fitments for the 2016 Ford Focus Se Hatchback. However, the kit linked in the description of the video would be compatible with your vehicle.
PrecisionLED I am just curious on the size of the bulb or bulb name. Because I tried looking around for a source, but only got a wide variety of bulb name/sizes.
Which light in particular are you referring to (i.e. map, dome, door, etc.)?
PrecisionLED All of them if possible.
where can i order this kind of LED ?
Thank you for your interest. There are direct product links in the description of the video.
How do you change the bulb on the license plate light I have a 2015 focus
The license plate lights would be stock LED, which you cannot swap as it is soldered to a chip and board.
Technically you probably could swap them out, but, that would require a whole new assembly more than likely, with new circuit boards and everything else required... I haven't done any research on this, but I know a lot of things on cars, especially lights, can be replaced with aftermarket versions that are often better quality... Why Ford, and other automakers, can't include better lights with the vehicle from the factory, is beyond me...
I have a 2015 ford focus and it has LED lights changing colors under the driver and passenger front area, how do I turn those off?
We are unsure exactly, as we would have to have the vehicle in hand to answer you definitively. I would think you can just pull the bulb or a fuse. However, before acting on anything, I would recommend contacting your dealership as you would not want to damage anything in your vehicle.
The controls for those are on the overhead console right next to the sunglasses holder. You can turn the brightness up or down(off) and select what color you want the LEDs to be.
como se cambia la luz del espejo retrovisor?
ua-cam.com/video/cCgkOx17LEI/v-deo.html
Hi, do you have color lights?
Unfortunately not, as any color hues in your lights actually decrease your nighttime visibility. We only carry the 6000K and 8000K colors as they are the purest whites with the best nighttime visibility.
@@PrecisionLED thank you
What light bulbs are these called so i can buy them? Please
For headlights
Hi! You should be able to find what you are looking for using this direct link. www.precisionled.com/catalogsearch/result/?q=ford+focus&p=3
Thanks for tuning in!
On our 2013 LW Focus, the bulbs are underneath the circuit board, and can NOT be accessed from on top!
mine is the same way. i have a 2014 Focus SE with the Led handle lights and footwell lights did you manage to get the bulbs out or no please let me know?
Thanks for the advice!
On your website it says that the lights work from 2012-Up. But you say 2010-Up. Which one is correct?
Thank you for your interest. We apologize for the confusion. We are currently cleaning up the website to prevent customers from having to ask these questions. The installation video and package on the website is for the 3rd generation Focus, which is years 2010-present.
+PrecisionLED on the parking light you think its all the same for all fords?
No, that would not necessarially be the case. However, I would say that most Fords do indeed us the T10 bulb for parking lights.
+PrecisionLED oh ok can yall make a video on the 2013-2015 ford fusion on how to change all the lights like on this focus?? I would appreciate it bro...
Thank you for your interest. We will keep an eye out for a Fusion out here in Los Angeles for an installation video. Subscribe for updates!
i did every single light on my 2015 car .
Nice!!
How about 2018
We will keep an eye out for a 2018 out here in Los Angeles for an installation video. However, the installation process should be very similar, if not identical to the video shown.
Front light bulbs cannot be changed without unscrewing whole light? God ford made it more diffucult ...
Lol how is it difficult it’s 2 screws and piece of rubber?😂
It is actually pretty simple if you follow the instructions in the video!
I really don't think this guys english requires subtitles haha..
🤣😂
What about the license plate light wtf
The license plate would use a stock LED, which you cannot replace as they are soldered to a chip and board.
Thank you!
You're welcome! Thank you for watching!