I’m so looking forward to the one-piece videos! Already got mine w/ power regulators pre-ordered and two down to bare metal doors with ongoing body work/rust repair in the garage. Definitely want to watch you do it, first!
I just picked up an 84 Long Bed my question is with this kit if i already sourced out a short bed and short bed driveshaft instead of cutting my longbed and long bed driveshaft would that short bed and shaft bolt right up as well?
What about the gas tank? I have a 16gal tank in my long bed, will I be able to use that with the existing brackets or do I have to order a new one for a short bed?
I don't think I need to buy a new gas tank is going to be at same place as the old one im doing my short bed conversion now im bout to cut my truck frame
Just got an 87 log bed today. What is the exact length bumper to bumper? It’s at a buddies house. Reason I’m asking is because it might not fit into my garage haha
This kit works on 3/4t trucks as long as you DO NOT have the 8200 GVW on your tag as shown in this pic: images.holley.com/ltsc38773-75_08.jpg If your truck has this GVW tag it will not work because your frame is actually manufactured from THICKER steel than a normal 1/2 or 3/4 ton truck.
Naaa , this is complicated as hell ,, just cut at the end of bed and thats it . Cut bed and then frame about 6 inch and then weld it and you don't have to do all this bs , lve done it before so.. It be easy if you cut with the plasma do lol
Looked for something like this for my dad's old truck about 3 years ago no luck
But now it's do-able love it
Awesome ideas and easy kit to install, I’m still a long bed guy! Thanks David.
Impressive. Well engineered templates just like used building commercial aircraft.
This channel and Dave are the best in the industry🏆
Thanks for the feedback and for watching!
You guys making each for anybody, great job
This is best tech channel in youtube👍👍👍
Thanks for watching!
Just finished mine and I couldn't be happier with the results, or the kit.
Excellent! Thanks for the feedback.
Hey just quick question did you need to replace the drive shaft because of it being shorter
@@alexcamarena7555 you would need to take it too a machine shop that lengthens or shortens drivelines
@@alexcamarena7555 yess you gotta get a different driveshaft
@brothers Ordered my kit and waiting for delivery. Can’t wait to get it
In-Stock and shipping now!
@@BROTHERSTruckPartsTV Received my order today! Very excited! May just make a video with my 10yo son installing it.
@@Alejandrojy6yd right on!
Dave, you have knees of steel! Love the video
I’m so looking forward to the one-piece videos!
Already got mine w/ power regulators pre-ordered and two down to bare metal doors with ongoing body work/rust repair in the garage.
Definitely want to watch you do it, first!
Its already been shot, we're in the process of editing it now, stay tuned!
I love this channel👍👍👍
Thanks for watching!
Would love to see a video on leaf springs to coil springs conversion.
Thanks for the suggestion!
After the short frame conversion how is the bed shortened or does it require finding a short bed to buy?
I just picked up an 84 Long Bed my question is with this kit if i already sourced out a short bed and short bed driveshaft instead of cutting my longbed and long bed driveshaft would that short bed and shaft bolt right up as well?
Yessir
@@BROTHERSTruckPartsTV I also have a c10 long bed. I was wondering if I should LS swap the engine+transmission or make it a short bed first.
I hope they will make a kit for a c20 1974 crew cab
i ordered the kit today for my 81 gmc c15, will you guys ever do a bed floor video?
It's not on our list, but anything is possible. Thanks for the suggestion!
@@BROTHERSTruckPartsTV you already have the frame and bedside video. It would make a perfect series!
@@jkitch6408 Agreed!
Nice work, thanks
Thanks for watching!
Great wheels on your truck. Tell me where you bought
Thanks
These wheels are GM steel rollers that are used sometimes on the newer Tahoe, Denali and Suburbans during transit from the factory to the dealer.
I wish Dave had a twin brother that did Fords. I assume he'd have a goatee.
That's funny!
What about the gas tank? I have a 16gal tank in my long bed, will I be able to use that with the existing brackets or do I have to order a new one for a short bed?
You'll have to switch to a shortbed tank.
Enjoy your vidio lots of info. Do they make a kit for 88 - 98 long bed trucks?
Not right now 🤔
I don't think I need to buy a new gas tank is going to be at same place as the old one im doing my short bed conversion now im bout to cut my truck frame
Do you buy a short bed or cut the long bed and make it a short bed?
How do I know what fuel tank will work?
Do you need a new short bed for this or can you modify the long bed into a short bed?
You can modify your longbed into a shortbed. We have a video on that to help you out.
Just got an 87 log bed today. What is the exact length bumper to bumper? It’s at a buddies house. Reason I’m asking is because it might not fit into my garage haha
Roughly 208" - 212" depending on what rear bumper it has.
@@BROTHERSTruckPartsTV looks like I need to shorten it first! Lol thank you
Would this work for a k10 too. Not sure if the frames are different at the rear
Hi! My C20 has 6400 GVW as manufactured and 8200 max capacity. Would the kit work?
Is this only for half tons? Does it reduce the payload specs and if so how much?
This will also work on MOST 3/4t trucks. It does not reduce the payload unless you also intend to change the suspension parts to 1/2t pieces.
This is why I don't use purchased kits. I just " borrow materials " from work an fab everything my self.
I'm considering doing this to my 84 c20 long bed but it's an 8 lug, do you guys sale a 5 lug conversion kit or know the easiest way to convert?
Easiest way to convert is to swap all the front end parts (ball joints, tie rods, etc) for 1/2t parts and then swap the axles for 5 lug pieces.
Will this kit work on a 1977 C20 Bonanza? 3/4 Ton 8 lug...
Is Fluxcore alright to use with this kit?
It's what I have at hand.
does the template work for a crew cab as well?
No sir, sorry!
Is this kit compatible with a 1977 C20 3/4 Ton with a 6 inch frame (measured top to bottom). If not compatible, why not?
This kit works on 3/4t trucks as long as you DO NOT have the 8200 GVW on your tag as shown in this pic: images.holley.com/ltsc38773-75_08.jpg
If your truck has this GVW tag it will not work because your frame is actually manufactured from THICKER steel than a normal 1/2 or 3/4 ton truck.
@@BROTHERSTruckPartsTV i actually do have the 8200 GVW, so it won’t work?
@@aidancarranza9510 nope, won't work. Sorry
@@BROTHERSTruckPartsTV YIKES…. I’m left with a cut frame now
@@aidancarranza9510 You used our kit to cut and drill it?
This work for the K10 4x4 too? Strong enough?
Please give our tech team at 1-800-977-BROS
Will it work on 3500
Do yall make a kit for the 88-98 yet
Not yet.
@@BROTHERSTruckPartsTV well get on with it! Lol thanks for the reply
@@bradleysmith8950 will do!
how much do yall charge to do this?
We don't do any work in our shop, just tutorial videos so you can do it at home.
A lot of work, think I’d rather just buy a short bed
Lol it’s cheaper to buy a long bed and convert it. Short beds are far more sought after
Yep.
I love long beds alot better
So if U can use this to make a short bed frame U can use this to make a long bed to or NO U can't ????
No you cannot. This kit only helps remove from the frame and has no provisions for adding to it.
You must REALLY want a short box…….?
Naaa , this is complicated as hell ,, just cut at the end of bed and thats it .
Cut bed and then frame about 6 inch and then weld it and you don't have to do all this bs , lve done it before so..
It be easy if you cut with the plasma do lol