Morning Baz really enjoying the plant repair videos and the way you explain what you’re doing and the methods of the repair having never worked on plant,nice effort cal with your welding keep up the great videos.
Pranging a wagon is bad enough ..... but a nice shiny new one!!! Unforgiveable. I'm an owner driver, my sites are private so I've never needed a ticket and of course - I began so long ago, you didn't need one - you did whatever you proved you could do. But one time, just before I retired, we had about a three week hold up on a job I was on and the next site, about two miles down the road came into us begging for help - it worked out well. My ticketlessness wasn't deemed a problem but it was a good job that I hadn't bigged myself up too much because the Guv'nor put me in the machine - a Zaxis 180 with 6 hours on the clock and said he had a train of wagons coming in all day - most of 'em also new. Site was well organised so I had radio to the drivers so none of the old fashioned hand signals - nice and easy - digging and clearing a load of much for an attenuation tank. Later on, I met some of the drivers in the tea hut - a nod, and a hello mate - you the new digger driver. And when I confirmed they said that they wanted me on all their jobs - in and out quick, no overloads, no muck over the headboard or bashed sides. I'm still living on that🤪🤪🤪
I've now consumed every video so far. Been following Asheville for years now and started following you after rebuilding his bucket. Without doubt the best channel for authenticity and for passing on experience and knowledge to the younger generation. Keep up the great work Baz!
Sunday morning is You Tube morning catching up on all my favourite UA-camrs. I always start off with our good friend Daniel Luisi Fortnite this morning Baz I pressed your video first great content my love it now I’m going to watch Mr Luisi😊😊😊
Another amazing episode! Also came over from Ashville when you did the bucket. I only do some hobby welding, but learning a lot here! Keep it coming. Greetings from the Netherlands!
I envy your workers. They have the rare opportunity of learning from a true master. Problem solver extraordinaire who generously shares his wisdom, experience and skills. We have some in Australia, including Curtis and Karen from Cutting Edge Engineering. Your hard work humbles viewers with carpet-strolling (office bound) jobs. Stay safe and be very proud of you achievements. Aussie Al.
I like to see how we as mechanics/fabricators deal with faults on the fly nothing like flexing the brain and getting machines back in service. I wish I had a work team like you have
Absolutely love this channel and the work that Baz and the team does! Follow you on everything its all real stuff by a hard working genuine bloke! Keep it up Baz!
Baz, I do the same type of work as you, first time I’ve seen the left hand drill bit extraction. I always say with slag you drag. Great work director and Baz!
Great work baz as always by you and your team. I Recently subbed to your channel coming over from Ashville's channel for the loading bucket repair. Since then I've watched all your previous UA-cam videos and I'm hooked. now it's always a fun weekend with videos released from welderfabber on Saturday and Ashville on sunday. 😊
Howdy Baz , Cals coming on . Mucka some one stoves the side of your truck in and you don't ask a name ??? Dodgy. Great video . Thank you for taking us along 👍👍
Cracking Video again Baz Merch is looking fire to! great to see you giving Cal support and a opportunity to better his skills. looks like a great repair on the tipper too!
Great upload. Good job on the tipper repair, reckon the lad that damaged it needs to learn how much force an excavator can have when he’s trapped between the bucket and the floor!!
22:35 Love those Blue Rodgards....the company with out of business few months ago... .but someone else is making the exact same thing......by the way......do you ever come across that rare cellulose rod number 1109 ?......the new guys will try and buy at the weld supply all the time when I send them with a 6011.......haha....
Love your content BAZ...cheers from Florida, USA....Paul..hats off to the 'Director' I laugh when he nods the camera to answer yes or know....p.s. my Mom's family name is FOX....maybe that is why I love your show....????, nah,,,,you guys are great...
As a trainer, did like the way you allowed callum to welder, without you hoovering over his shoulder, a little guidances at first, no need to add to the trainees stress, well done, lead by example, cheers
Another insight into the world of Baz Welderfabber I find your down to earth approach gets the job done. Love how your mentoring Callum. Daniel sent me over to your channel and i'm glad he did. Crack on lad on to the next job.
Hi Baz, like I've said to Daniel at ashville your videos are testament to your hard work and effort. There is so much to learn from grafters like yourselves. I used to work for a tipper firm called Ardula which sadly went into administration a year ago. Keep up the good work shame I don't live closer would love a job at fox/hurt as I'm multi talented mechanic scaffolder tipper driver and plant operator...
Great to see cal learning stick welding. You are a great teacher. My mate teaching me says the same as you. Push the rod in keep the arc short. Must be the same for most learners. Your content gets better every week well done great effort.😃💪🤙
Morning Baz , watching from Saudi Arabia., Gaffer -from Wigan area-staying next apartment in the accommodation block put me on to your UA-cam channel . Enjoying the chronicles. Chapters , short clips 👍🏼
Another Good video it’s good to know tips about stick welding like pulling and not pushing welds unless vertical hopefully you can teach more about welding in future. I haven’t welded yet but I know this info will come in handy when I do 👍
Another fine video lad. I bet that tipper "Hurt" when it got damaged. Ok, bad joke but someone had to say it. Tig welding, l need a ton of practice, mine looks like a big bird dumped on it!
Amazing video as always! For starting 7018 stick rods- I find if you start maybe a centimeter in front of where you really want to start and then quickly drag back, you can avoid porosity/pinholes. It basically preheats the rod. Also, to clean up the slag on welds, check out a cheap tool called a needle scalar. Keep up the great work! -John from the USA
Love the asheville channel but this channel as great. Many people think this is an easy job. You make it look easy. Fantastic work keep up the content 100% quality thank you
Great video boys, love the drone footage especially when following the van into the yard to get the excavator parts, i told one of the young engineers who I work with about this channel, as he’s just passed he’s welding exams as there’s some great tips and techniques which you guys do … keep um coming boys loving the channel
the reason that guy can keep all that stock is because its a family business nowadays big companies keep zero stock due to accountants tell stores what to keep we are going down the drain great video
Brilliant content Baz,you sure are a great craftsman with all the different techniques for every situation you encounter. Fellow Asheville subscriber👍👍
Great work again, there isn’t a day the same in your line of work, I’d say there is days that a a bit to stressful, but you have to take the good with the bad, loving the content
yet another top episode Baz and Director 👌already looking forward to episode 6 👍 maybe a little anti-seize on those roller bolts? think of the next guy pulling it apart, It might be you!
This channel is truly captivating due to its authenticity; the absence of scripted acting makes it incredibly addictive to watch. Thank you!
It’s nice to see a real channel, no scripts and Hollywood budgets
thanks guys
Every week is just fascinating, never welded in my life but this is just brilliant
Morning Baz really enjoying the plant repair videos and the way you explain what you’re doing and the methods of the repair having never worked on plant,nice effort cal with your welding keep up the great videos.
Pranging a wagon is bad enough ..... but a nice shiny new one!!! Unforgiveable. I'm an owner driver, my sites are private so I've never needed a ticket and of course - I began so long ago, you didn't need one - you did whatever you proved you could do. But one time, just before I retired, we had about a three week hold up on a job I was on and the next site, about two miles down the road came into us begging for help - it worked out well. My ticketlessness wasn't deemed a problem but it was a good job that I hadn't bigged myself up too much because the Guv'nor put me in the machine - a Zaxis 180 with 6 hours on the clock and said he had a train of wagons coming in all day - most of 'em also new. Site was well organised so I had radio to the drivers so none of the old fashioned hand signals - nice and easy - digging and clearing a load of much for an attenuation tank. Later on, I met some of the drivers in the tea hut - a nod, and a hello mate - you the new digger driver. And when I confirmed they said that they wanted me on all their jobs - in and out quick, no overloads, no muck over the headboard or bashed sides. I'm still living on that🤪🤪🤪
Another brilliant one baz . looking forward to the next one.foxy has got a good team around him .a lot of skilled staff and very hard working team 👍👍👍
thanks bud
Baz. Another great video. You guys have a first class operation. Keep up the good work and cheers 🍻 from Central Valley California USA.
will try to bud
I've now consumed every video so far. Been following Asheville for years now and started following you after rebuilding his bucket. Without doubt the best channel for authenticity and for passing on experience and knowledge to the younger generation. Keep up the great work Baz!
Cheers really appreciate that
What a fantastic channel, come over from Ashville and glad I did, you guys nail it every week, can't wait for the next one, cheers lads.
thanks bud
Sunday morning is You Tube morning catching up on all my favourite UA-camrs. I always start off with our good friend Daniel Luisi Fortnite this morning Baz I pressed your video first great content my love it now I’m going to watch Mr Luisi😊😊😊
Big Baz smashing it as always. But think the adverts are taking the piss there all hair products 😂😂
Another amazing episode! Also came over from Ashville when you did the bucket. I only do some hobby welding, but learning a lot here! Keep it coming. Greetings from the Netherlands!
Awesome, thank you!
I’m here from Ashville baz. I’m glad I subscribed to your channel you do great content keep it up 👍.
I envy your workers. They have the rare opportunity of learning from a true master. Problem solver extraordinaire who generously shares his wisdom, experience and skills. We have some in Australia, including Curtis and Karen from Cutting Edge Engineering. Your hard work humbles viewers with carpet-strolling (office bound) jobs. Stay safe and be very proud of you achievements. Aussie Al.
i love seeing the knowledge passed down fro the seniors to juniors, well done chaps good effort.
Just need more juniors coming through
I like to see how we as mechanics/fabricators deal with faults on the fly nothing like flexing the brain and getting machines back in service. I wish I had a work team like you have
We get our under carriage, bucket parts from MST. TOP NOTCH. 👍👍
Ye am gonna give them men a shout soon
Another great video and Callum couldn’t have a better mentor than you
Absolutely love this channel and the work that Baz and the team does! Follow you on everything its all real stuff by a hard working genuine bloke! Keep it up Baz!
Cheers pal
Baz, I do the same type of work as you, first time I’ve seen the left hand drill bit extraction. I always say with slag you drag. Great work director and Baz!
Morning Baz . Another great video ,have a good week ,keep safe 🇬🇧🎶
Thanks 👍
Sweet repair on the truck 👍 and bucket repair should be fine for years
Great work baz as always by you and your team. I Recently subbed to your channel coming over from Ashville's channel for the loading bucket repair. Since then I've watched all your previous UA-cam videos and I'm hooked. now it's always a fun weekend with videos released from welderfabber on Saturday and Ashville on sunday. 😊
Awesome, thank you!
Howdy Baz , Cals coming on . Mucka some one stoves the side of your truck in and you don't ask a name ??? Dodgy. Great video . Thank you for taking us along 👍👍
Buzzing you replied to my request. Am waiting for that day baz and the Director 😂 ill try tag u in video with some my Inventions.
Best day of the week , Saturday morning chronicles 😊
Passed you at Horwich yesterday , gave you a toot 👍
Legend!
Just getting better every chapter. You definitely get stuck in and get the job done top quality
I try, I must get 50-100 calls a day so there is a lot you dont see.
Cracking Video again Baz Merch is looking fire to! great to see you giving Cal support and a opportunity to better his skills. looks like a great repair on the tipper too!
Great upload. Good job on the tipper repair, reckon the lad that damaged it needs to learn how much force an excavator can have when he’s trapped between the bucket and the floor!!
Great channel. No primadonna b/s. This is how it's done in the real world.
I always remember the saying if it makes slag give it a drag in reference to pushing or pulling a weld
Great video Baz and Callum and director well put together slowly catching up keep up the great content top job on the tipper body 👨🏻🏭👍🏼😎
Thanks 👍
A plethora of knowledge baz. Great team all round. Another ashville sub came over to u. Keep up the good work
Cheers appreciate it
Another great Roy getting better and better keep up the great videos mate
I really wish I lived closer man this job looks perfect, good challenge everyday love sorting problems at work on site.
22:35 Love those Blue Rodgards....the company with out of business few months ago...
.but someone else is making the exact same thing......by the way......do you ever come
across that rare cellulose rod number 1109 ?......the new guys will try and buy at the
weld supply all the time when I send them with a 6011.......haha....
Feel a little out of sorts , I never knew about left handed drill bits
Great video
Thanks
Really handy mate
Every time I watch these videos I learn something new… thanks again WF for creating this channel 🤝
My pleasure!
Love your content BAZ...cheers from Florida, USA....Paul..hats off to the 'Director' I laugh when he nods the camera to answer yes or know....p.s. my Mom's family name is FOX....maybe that is why I love your show....????, nah,,,,you guys are great...
thanks much more to come
Absolutely love this channel and the work that Baz and the team do. Fantastic content as always Baz and the director, yes another Ashville watcher
Much appreciated
As a trainer, did like the way you allowed callum to welder, without you hoovering over his shoulder, a little guidances at first, no need to add to the trainees stress, well done, lead by example, cheers
100% respect for the way you treat others for a start….
Fantastic mentor and a wealth of knowledge to say the least….
Absolute G
Another quality chapter. Good to see Cal getting some mentoring and learning the right way to do the job. Some nice TIG welding on the truck body.
Love how you show and explain everything.
I love the new series Baz, They gave me that Milwaukee grinder with the low profile head to trial the other week and i was sold straight away!
Picked u channel up watching ashville àn think it's top ,another down to earth guy brilliant
Enjoyed the video start/finish..Excellent...spades a spade man
Fascinating stuff. What skill and knowledge and competence !,
Great show
Fantastic job again another ashville watcher picking up tips about welding keep the great work stay safe out there 👍👍
Can we have an update on that wagon repair please?
Top video as always Baz!
still in body shop
@@welderfabber Hope see more on this one before she goes back on the road Baz.
I dont know we have so many I will try and remember bud@@Sash_Window
Another insight into the world of Baz Welderfabber I find your down to earth approach gets the job done. Love how your mentoring Callum. Daniel sent me over to your channel and i'm glad he did. Crack on lad on to the next job.
Hi Baz, like I've said to Daniel at ashville your videos are testament to your hard work and effort. There is so much to learn from grafters like yourselves. I used to work for a tipper firm called Ardula which sadly went into administration a year ago. Keep up the good work shame I don't live closer would love a job at fox/hurt as I'm multi talented mechanic scaffolder tipper driver and plant operator...
Seen ya wagon that u repaired the side box section on today it past my yard on Caton Rd just of j34 m6 at lancaster and just spotted that section.
Just found your channel and its 👍👍👍
Greetings from Denmark
Thanks for coming
Im an ashvile viewer. I'm happy he sent me your way. I'd love to know more about you and how you got to where you at
Learning a lot watching you videos cheers Baz
Great to see cal learning stick welding. You are a great teacher. My mate teaching me says the same as you. Push the rod in keep the arc short. Must be the same for most learners. Your content gets better every week well done great effort.😃💪🤙
Morning Baz , watching from Saudi Arabia.,
Gaffer -from Wigan area-staying next apartment in the accommodation block put me on to your UA-cam channel . Enjoying the chronicles. Chapters , short clips 👍🏼
Nice one
Again anther fantastic video so interesting well done bud stay safe. 👍👍👍👍👍
Dizzy with the drone footage 😂😂❤❤
haha bloody director playing about
ive come over from ashville after the bucket keep up the good work
Another Good video it’s good to know tips about stick welding like pulling and not pushing welds unless vertical hopefully you can teach more about welding in future. I haven’t welded yet but I know this info will come in handy when I do 👍
Another fine video lad. I bet that tipper "Hurt" when it got damaged. Ok, bad joke but someone had to say it.
Tig welding, l need a ton of practice, mine looks like a big bird dumped on it!
came over from Ashville after watching bucket video, great content your putting up fella some really great videos
welcome and thanks
Baz love your Chanel and content I'm one of Asheville subs keep up the good work 👍
This channel is excellent, fair play
You are the best out there i only came across your channel by chance look forward to watching it your top class well done baz
Great content mate 🎉
Excellent video as always, keep up the good work,great content and very well explained 👍
good honest graft
Great on-site repair.
Great show lads 🇮🇪🇮🇪👌👌
Amazing video as always! For starting 7018 stick rods- I find if you start maybe a centimeter in front of where you really want to start and then quickly drag back, you can avoid porosity/pinholes. It basically preheats the rod.
Also, to clean up the slag on welds, check out a cheap tool called a needle scalar.
Keep up the great work! -John from the USA
Amazing channel and really enjoy all the videos love seeing all the big bits of kit you deal with
Love the asheville channel but this channel as great.
Many people think this is an easy job. You make it look easy.
Fantastic work keep up the content 100% quality thank you
Thank you very much!
Great video, love the variety, hope all is good
Brilliant craftsmen at work. Awesome repair of the truck.
Thanks 👍
Great video boys, love the drone footage especially when following the van into the yard to get the excavator parts, i told one of the young engineers who I work with about this channel, as he’s just passed he’s welding exams as there’s some great tips and techniques which you guys do … keep um coming boys loving the channel
Most instructive!
Im another one from Daniel,s channel. Great content, thanks for sharing
Thanks for coming
the reason that guy can keep all that stock is because its a family business nowadays big companies keep zero stock due to accountants tell stores what to keep
we are going down the drain great video
Brilliant content Baz,you sure are a great craftsman with all the different techniques for every situation you encounter.
Fellow Asheville subscriber👍👍
Truly killing it love from Las Vegas Nevada
thanks for tuning in
New favourite channel 👍🏻
great variety on this channel one of my favs now
Glad you enjoy it!
another top video Baz Keep up the good work I am learning something new every episode
Glad to hear it
Another quality video baz
Awesome video. Thank you baz . It’s must be great for Callum to learn from you baz
Hope so
Proper job 👊🏻👍🏻
Great work again, there isn’t a day the same in your line of work, I’d say there is days that a a bit to stressful, but you have to take the good with the bad, loving the content
thanks your right
Love this channel Would be good to see a video on the different types of weldon in the Future And what one is best
Great video I work for nd civils you visited at Oldham but I'm not working on that site,very good videos 👍
Got nothing to do with welding or building but hooked!
If there's slag...you drag👍
You could use a four finger kit kat as a measuring guide and then you could eat the kit kat afterwards
Another great video baz, keep it up my man 👌👌👌
I must say very informative,I’m an Ashville sub fantastic content keep it coming long may it last. 👊🏻
Much appreciated!
yet another top episode Baz and Director 👌already looking forward to episode 6 👍 maybe a little anti-seize on those roller bolts? think of the next guy pulling it apart, It might be you!
Hi Baz great job on the 135 track, how come you never mention about taking battery leads of or using a battery device.
Cheers Bill th Isle of Man
Top video that pal 👌