Hey man, can you explain in detail how you did the rear sprocket, the tooth number, and what chain? Mine had the 49cc and has 25h chain, which is too small I think for a built 212. But I cannot find a 420 sprocket that will bolt to the hub. Thanks. Trying to get this little chopper up and going!
It won't work, the cheap Chinese two stroke frames are too small, I tried, even if you get the engine into the frame like I did, the sprokets are 6 inches apart, it's better to build a frame and make one better
Hello All! There is a mini-chopper here. Going to use a swing arm set up in the back. center shock gone, and installed just like motor cycle. Except, one speed. BullyBilly.
Hell yea, i managed to squeeze a 79cc on a razor mini chopper... thing is bad, does 50. Very tiny...got a brand new 212 but i think ill kill myself if i put it on there lol
😂 video length it 2:12
Oh my god. 212 predator lol
Very proportional, I dig. Could use a gas tank even if it was fake
You can add a real gas tank on there I have one on mine
Just stumbled across this video,nice bike 👍
how did they get the throttle to work and the governor to push the right way
Damn nice bro!!!👍🏾💯
You be nice to those pups…
Love da rake on it.
Hey I have a few questions... Did you weld the yourself or did you buy a bike online, also how much did it cost to build?
Which front forks did you buy to build this?
Wonderful
How did you get the rear wheel off? I have the same frame and can't fit a socket or regular wrench!!
Did you have to weld a plate to fit the 212?
Were did you get your tries and rims and front forks
what gearing you go with
Parabéns. Baike Chopper/ moto com motor estacionário kawashima e partida elétrica. Abração
What kind of frame is this? I have one but its old and I'm trying to build it.
How much did it cost to build what would you charge a bro for a bike like that
Hey man, can you explain in detail how you did the rear sprocket, the tooth number, and what chain? Mine had the 49cc and has 25h chain, which is too small I think for a built 212. But I cannot find a 420 sprocket that will bolt to the hub. Thanks. Trying to get this little chopper up and going!
Did you ever figure it out because same mines has a 49cc and I want to swap it with a 212cc
@@zarcatcadifd676 what bike is it and where can i get ot
It won't work, the cheap Chinese two stroke frames are too small, I tried, even if you get the engine into the frame like I did, the sprokets are 6 inches apart, it's better to build a frame and make one better
Dealing with this now haha
Hey ive gotten to the point of putting my motor on but it can barely fit. I have the exact same frame and motor. Whatd you have to do to get it to fit
What frame is that or is it custom
Hey how did you get one of those ive been tryna look for 212cc choppers for me to buy but i cant find any please help
I have the same frame and motir but im just starting my build. What did you do to swap the side of the rear cog and what clutch did you go with?
Where did you get the frame?
How fast does it hit?
What for clutch is in it?
Hey brother just seen your video.. where do I get a frame like that at?
i build these same mini sleds.....just collected all the parts i need for my 5th one.....with a nice paint job, you can get 1k all day for these
Where do I buy a frame at?
Can u send me a link to the tire and rim sizes ima bout to build one my self
rear....130-60-10.....,front...90-90-12
YESS! I have the same 2 stroke 49cc chopper , and a 212 ready to go in.
Did you figure out a rear brake system??
I need advice on that.
What is the bike called?
Where do I get the frame?
@@willwork2fish261 I guess I could sell you mine I didn't do much to it yet
Where did you get the seat
video makes me feel like i’m out of breath
How did you switch the brake over to the right side of the frame? I'm trying to do the same with mine but cant
Ever figure out the brake switch up??
@@stevenlorumhatcher I'm just running a jack shaft
Looks like that's a 40 tooth in the back so by my calculations that chopper will do 60 with the governor zip tied
Were is the frame from
The chain looks a bit loose, maybe tighten it a bit?
Can you do a video explaining how you adapted the 212cc motor.. I have the same bike with a 2 stroke 50cc on it. 😞
Were can you get the frame
It takes a bit you have to weld and cut stuff if you have discord I can show you
Can you send the link of the rim sizes front and the rear
Hello All! There is a mini-chopper here. Going to use a swing arm set up in the back. center shock gone, and installed just like motor cycle. Except, one speed. BullyBilly.
Its a 212 predator motor and je ended the vid at 212 lol odds
Where did you get the sprocket from?
Amazon
@@badkid200003 got a link can’t find a 420 chain one that fits these Chinese 49ccs
What inch tires
How much can I buy it?
What exhaust. I’m building literally the same thing and I see why you have another exhaust
He made one
size of the frame sir
I gotta weld a new plate mine came loose. stay tuned I will be going on a back road cruise berry soon👌
Robert Woods what gears are you using with the predator? Front and back, TIA.
Robert Woods I have this same model no engine has brakes and everything what’s the brand /model?
How did you mount the Engine
Abdur Bouyer with bolts
HAHAHAHAH!!!
I like your style Bob Schweeps
Брат есть чертеж или наброски хотя бы?
Hell yea, i managed to squeeze a 79cc on a razor mini chopper... thing is bad, does 50. Very tiny...got a brand new 212 but i think ill kill myself if i put it on there lol
Brod are you selling it how much
Its stolen