AlphaRex LED Headlights - 2015-2017 Ford F150
Вставка
- Опубліковано 1 лип 2019
- Het a Set at AlphaRexUSA.com
Support the Channel by visiting our Gear page on Amazon:
www.amazon.com/shop/heliomuro
Follow us on:
- Instagram - / keepitdirty_offroad
- TikTok - vm.tiktok.com/ZMRA267U6/
Music: www.epidemicsound.com/referra...
Intro Music:
Unusual Habitat by Silent Partner
Track: Maduk - Go Home [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Maduk - Go Home [NCS R...
Free Download / Stream: ncs.io/GoHomeID
Track: Barren Gates - Slow Down [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Barren Gates - Slow Do...
Free Download / Stream: ncs.io/SlowDownID - Авто та транспорт
Great video! Made installing mine a breeze. Happy with them so far and the output is crazy.
Glad we could help. The output of these lights is what sold me too on them
You had me at docking. Need these for my '16. New sub keep up the content.
ebradley82 🤣🤣🤣 thanks man.
A solid video. Aloha from Oahu🤙
Can't wait to they release the 4Runner and Tacoma versions as viewed at last week's SEMA.
This review was exactly what I was looking for since I sent an email inquiry to AlphaRex, but haven't heard back from them yet!
those lights look sweet
I love the way it came out!
Thanks man!
Yeah, they look great and they make version for a few trucks and cars
Killing on the videos guys.
Thanks man. 🙌🙏
I just installed the Morimoto headlights/fogs on my 2019 F150. All I can say is badass!
The Car Crazy Guy nice! You I SoCal to do a comparison between the Marimotos and our AlphaRex?
Keep It Dirty Off-Road Yes. Santa Clarita
@@TheCarCrazyGuy Dude, We need to make a comparison video happen!! Name the weekend day and time and lets make it happen. We could meet out in Cal City or somewhere where we can do a proper comparison at night.
@@KeepItDirtyOffRoad Cal City? Yikes. If you're ever down this way let me know.
The Car Crazy Guy the challenge is location. We need an area with dark roads to test the output. Similar to our comparison video. I’m in Temecula area so let me know where your confutable meeting and I’ll set it up. This is a video comparison video I’ve been waiting for and so have my viewers.
I bought the AlphaRex Pro series headlights and the cree led headlight kit. Can’t wait to get everything installed. Thanks for the video.
These are way better looking than the Anzo headlights. Looks like I have found the pair I'm gonna go with 👍🏽
🤘🏻🤘🏻🤘🏻💯💯💯
I bought some Nova Series for my Silverado. Yes they’re expensive, but once you install them and try them out, you’ll realize they’re worth every penny. 👍
Totally agree. Easy install and super bright!!
How do you have the amber lights on your grill wired in? Did you slice then into the drl line?
Thanks for putting up this video. Help me install mine for sure. Having issue with the DRL though. I installed per instructions and you video as reference but the Drl does not work. I have the ground just like you did. Any advise.
Check the fuse you tapped into and check the connections on the lights. Most of the time not getting power from the tap to trigger the relay is the problem.
If that douse this work, call the AlphaRex guys. They have good customer service
Great video. I need you to video my truck next 😘
🤣🤣🤣 I see another shady meeting in the middle of desert in our future. 🤣🤣 but all kidding aside, we should definitely do it next time your in town.
hi,do you have any issues encounter or any problem and claim for waranty.is good in long term?any input much appreciated.
Nice video. I planned to do the exact same exterior set up with headlights, grill, and fenders with turn signals. Do you have tutorials for grill and fender installs?
We don’t. This is our buddy Jason truck. He helps a lot of people with their Raptor swapped trucks. Reach out to him on IG (scraptor_1023) and he can provide some info. His IG is also linked in the video
Hi!,
I just bought the pro series( I'm poor:D) But, I was wondering about the DRL harness... Does that just make it so the DRLs come on during the day too, rather than ONLY at night. if I disregard that harness?
Thanks!
The DRL a harness is to make the DRL lights brighter.
Without the harness, the stock connection cannot power the whole DRL planks at full brightness. So you need the harness to brighten them up.
I can’t seem to find that exact set for a 2019 f150 supercrew. I like the 3 lights on top 2 on bottom look. Any idea if there available
Like I said. Grill and light design changed for the 2018a and up.
What kind of fuse tap should I be using? should it match the fuse that I am tapping into?
Yes, your going to need a fuse tap that matches the fuses on your truck. I think the lights will come with a vehicle specific fuse. but keep in mind that Ford use 2 types of fuses. try and tap into a fuse that matches the provided fuse tap.
Do they come with harness or do you have to buy separate? Don't really see option on website. Thanks
William Rhodes for the F150 they are direct plug and play. For the Raptor they are providing a harness with the lights. I was in the process of testing the lights for them on my old Raptor before the accident and hope to have a install video of that testing on the website soon.
Hey guys do you have any videos for your fog lights install and where you got them from ?????
We don’t man. Check out offroad alliance UA-cam page for details plenty of options out there.
So how do you adjust the low beams with the lights in the truck? Since you guys pointed out that it’s on the back of the light. I’d like to aim mine a little better
Check out my updated video where we put these lights on the Raptor.
Even though the adjuster is on the back, its accessibly and adjustable from the top using a Phillips head screwdriver. Made it super easy.
High beams are a little tougher and get adjusted from below. But still able to adjust without removing from the truck
@@KeepItDirtyOffRoad thanks for the help!
Nice write up, nice build. What specs are on that F150? Method wheels, 17's on 33?
Hey thanks, it's a 2017 F150 STX 2WD, 2.7L ecoboost. Running 17 inch Method NV 305's with 315/70R17 MT tires with a full Raptor suspension swap. Just recently swapped the front fenders for a set of McNeil Racing raptor style fenders. Check it out on InstaGram @Scraptor1023
How many fuse go on the tap ? And which kind 10 or 20
Javier Rivera all fuse taps need 2 fuses. One for the circuit being tapped (you get this one off the fuse panel) and a 2nd fuse for the accessories being added. AX lights have very little draw and you can use anything from a 5-10amp fuse because the circuit is only used to detect when the truck is on.
How is the compatibility with the grill lights? I’d like to make sure they work in tandem.
Not sure I understand the question. Grill lights are separate wiring.
@@KeepItDirtyOffRoad I saw a few people mention the raptor grill lights messed up the drl function. But apparently not because like you said it’s separate. Where do you tap into for your grill lights?
@@andrewjfranek3004 on my truck, a Raptor, there is no tap. On Scraptors truck here, I think be tapped into the battery and used a relay to turn them on.
I have the same bumper as him, what bracket / lights is he using for the fog lights?
He has a raptor bumper. So he’s using the raptor light brackets .
For some reason I can’t get my DRL to show while in drive but the LED strip works just fine when cutting the truck on and at night but during the day only the low beams come on and the strip. I have the harness connected I’m not sure if I did anything wrong or not. Do I just use fuse 10 on fuse tap in location #97?
So let’s first confirm what you mean by DRLs.
On the stock Raptor lights, DRLs are the low beams and the planks (amber turn signals).
On an F150 is varies but they don’t have planks.
With these lights on, the only DRLs are the planks in white. Low beams on the Raptor will not turn on as DRLs until you turn them on at night.
The fuse tap makes those planks brighter. That’s it.
Which ones are not powering up?
@@KeepItDirtyOffRoad the planks. I they come on fine. It’s just I thought the planks would be on even during daylight while driving. It’s just the low beams that are on. Unless I manually turn the light from auto
Which version do you have? Black, jet black, chrome, or Alphas?
Planks on the original ones are dim and they are on but you probably can’t tell. The ones with the clear planks are much brighter and easier to spot during the day.
If you not getting the planks as DRLs, call AlphaRex and see if they can help you troubleshoot. It could be cabling or something needs to be replaced
@@KeepItDirtyOffRoad okay I will give them a call and I have the Black version
Do you plug the drl thing into the fuse box? It has a little plug in the end where u put the fuses? Anyone can help id appreciate im stuck on this part right now
Watch the video man. We show you how exactly to do it and what fuse.
If you have a Raptor, we have a video for that truck too.
My 2015 has leds already is there a special harness for that
Yes. When it comes time to order you make sure you select that your truck had LEDs or you pick the raptor option since they all come with LEDs. There is a different harness for those trucks and you will need a turn signal bulb. Check our raptor install video as the process to put in your truck will be the same.
When you did the fuse tap, did it fit into the box properly? I've tried fuse tapping other things on my 15 XLT and it didn't look like it was gonna fit properly.
You may have to play with the orientation a bit, but it should fit and route the cable out of the back of the fuse box.
Keep It Dirty Off-Road so towards the front bumper ? Or which way if you’re looking straight at the engine bay?
@@nazarshcherbina7170 towards the cab. less chance of allowing water into the fuse box.
Keep It Dirty Off-Road awesome.
How are you liking the lights those lights? Have you ran into any issues with them since installing?
@@nazarshcherbina7170 No, lights have been great and issue free.
I have a question i have the nova led set for the f-150 (not raptor) they work great but since I have the automatic lights but when I drive only one side of my low beams works but when I switch the lights just to on they work great I wonder if you have any ideas for what’s happening with that?
I have not heard about this one. I would recommend getting a hold of AlphaRex Support number on-line. They have great customer service. Just be ready to show them pics on how the lights are wired so they can confirm everything is installed correctly. If they find everything is installed correctly and still happening they are great about replacing the light quick.
Ok so update so it was doing that between 5 and 7 which there’s pretty good amount of light so when it got darker the second light came on so it worked when I was in the automatic light mode it’s just mind blowing to me but I’ll call and see what they say
patrick Salazar I recently helped someone else with this issue as well i think. Go into your driver info screen and turn your DRL option off. You'll still get the DRL planks on the sides to light up, but it did fix the issue on another truck. Let us know if that helps.
Can these be easily adjusted once they're fully installed? I'm considering the AlphaRex Nova for my 2020 F150. I plan on installing a leveling kit, so headlight adjustment would likely be required.
Yes they can. The top light adjustment is similar to stock but with a more pronounced wheel that easier to adjust. The stock headlights only have a single adjustment. The alpha Rex have a separate adjustments for the hi beams so you can better fine tune the beams. That is a little more difficult to access as you have to go in from under the headlights. on the Raptor it's a simple process to reach under there. on a regular f150 I sure the aero bumpers will make reaching in a little more difficult.
@@KeepItDirtyOffRoad Appreciate the info. I work as full time auto repair tech, so getting into difficult places is pretty much a way of life. LoL. Probably skip the daytime running lights though. To each their own, but running any type of lighting during broad daylight just seems a bit pointless to me. Solid looking truck, btw.
Sagittarius 88 thanks, that’s Scraptors truck and it’s coming along great.
thanks man! 🤘🏻🤘🏻🤘🏻
Installed these. My remote start isn’t working and my check engine light is on have connect my MAF sensors by the grille. I did turn my truck on to make sure all lights were good how can reset code?
Headlights don’t cause CEL codes. If you used the fuse tap for the brighter LEDs, make sure the connection is seated right and pushed in all the way. Otherwise you have another unrelated problem here. Not sure what you mean by the MAF sensor either
I just installed the pro series and added led bulbs and it has thrown a bunch of check engine light codes. Any advice on a fix to clear the codes? Everything seems to be working as they should.
Tyler Osborn if your getting codes you only option is to Forescan. You just need an OBD2 port that will work for your truck and a PC based laptop. We plan on doing a video on it sometime in the future when upgrading to LED bulbs
@@KeepItDirtyOffRoad I have forscan, do you know what I need to be changing? I have to get my truck inspected soon and I'd really prefer not to have to take these off!
Tyler Osborn the forescan website has very detailed information on what to do. Check it out first. Alternate option is to get a hold of Jason from this video, he’s Scraptor1023 on Instagram and he should be able to help you out too.
2015 lifted f150 how much where them I hate my drl lights no option on dash to shut them off
Super Chevy check the website for for pricing and options man. The 15s have the same style as the Raptors. And you can keep the DRLs dim or go with the Carbon series and get much brighter DRLs
I hooked up the harness to fuse #97 but some reason they stay on with the truck off .any reason why. Thx
Marco&Ethan Dasilva make sure you wired to the correct fuse. It’s easy to get them confused. If you got the right fuse, try fuse 10
Don't use fuse 5 and use two 10 .
Excellent video! Question though, you ever wash your engine?
🤣🤣 yeah, with light pressure. But I’m on the trails almost every weekend. She only looks clean for like a day or 2
I’m installing a set of these. What amp fuse do you use in the fuse tap?
Daniels Trains & Toys we used a 15amp fuse.
Keep It Dirty Off-Road thank you
💯
🙏🙏
Im wondering what kind of fuse tap did you used, like if it is mini,micro2, or standard?
It’s been a few years since we filmed this. I want to say it was a Micro2 but honestly not sure. Check your owners manual, I think Ford actually shows the type of fuse to get for each location
@@KeepItDirtyOffRoad ok thanks, anyway been watching your video for a while need to memorize it so when im ready to install mine it would be quick and easy😁
So you can change dry from white to amber?
You can order them with Amber DRLs but you can’t change once you got it. They have to be ordered with the DRL color you want.
what turn signal bulbs are you using. I just installed the new midnight series and the led turn signal strip is not working right alpha rex says its my led bulb but i have resisters on it
On this truck we used the LASFIT LED bulbs but I don’t remember if Scraptor had to use ForScan to code out the bulb check to avoid hyper flashing.
@@KeepItDirtyOffRoad could you ask for me please
I did and just heard back. Yes, he did have to ForScan the truck to use the LED turn signal bulbs. Truck did not like the LED bulb and hyperflashed.
@@KeepItDirtyOffRoad ok thanks do you know what bulb after that he used or did the forscan fix everything
nicholas geiman ForScan removed the check on the bulb and resolved it
Bummer the DRLs are white and not amber. Saw their write up to make them amber, but you need to do some wiring adjustments along with getting an additional relay defeating the plug and play philosophy
TheHAZMAT221 yeah, agree. For the Raptors the amber light looks so much better. Maybe they will down the road.
Just got mine today, installing shortly. Coming from Anzo switchback projectors - my DRL is controlled through Forscan updates. Would I still need the add a fuse circuit?
Not many people have installed these apparently, there’s nothing on the message boards.
To have the DRLs on during the day, yes you do need the fuse circuit. Otherwise they are only on when the markers are on. Alpha Rex went the low tech way because some base model trucks don’t have the DRL functionality or wiring
Keep It Dirty Off-Road - my current halos are on via Forscan with my fog lights. That’s why I don’t think I’ll need the wire. I’ll obviously try it before I completely bolt things back together.
@@MikeTH1S From the testing we did during the installation, the DRL planks can get their power from 2 sources. 1. The Additional wired relay, 2. From the Marker light plug. If the Forescan config change makes the Marker Light plug hot at all times then it could work. Please let me know how it turns out and We will do an update video with the Forescan details if you don't mind helping us out with the details on how to configure it.
Keep It Dirty Off-Road Not a problem. The only downfall I can see happening is they won’t be full brightness in my scenario.
There may or may not be some Forscan magic for that as well though.
@@MikeTH1S Let us know how you testing goes. would be really interested on how it will work.
Is there a video of this f150 part list?
This was s an F150. It’s a Raptor conversion. But still a 2017 F150
Does these headlights come with a fuse tap?
Tyler Zahn they don’t. You need to get a Micro2 add a circuit to wire up the DRL harness. Recommend ordering the add a circuit online as most auto parts stores don’t carry them.
Why don't they make lights like these for the 04-08 f150s
JD Perez they eventually will I think. They had to have started with late model trucks first.
Would you please give the the type of tires and wheels on the truck. SIZE too
King Power 35s x 12.5 on 17 in method NV wheels
Keep It Dirty Off-Road thank u looks wicked
Method NV 305's with Ironman All Country MT's 315/70/17
What rims are on that truck?
17 inch Method NV 305's with 315/70R17 MT tires
How has the reliability held up? Have you had to replace them? Would you purchase them again or a different brand?
So far they have held up great. Had them a few years without issue even with off-roading.
Now we have heard some have issues so they are not completely bullet proof. But our experience so far has been great.
Thanks for the reply! Hopefully see u out in So Cal some day
👍👍 right on man. Make sure you follow us on instagrams to join a run
If I’m using an LED bulb for turn signals do I need a resistor for hyper flashing?
These headlights won’t change the way the turn signal flashers work since it uses the factory plug with a 3party bulb for it. If you want hyper flashing then yes you will need it. But if you don’t, as long as the LED bulb you use is properly made, it will work right without any errors. In our install we used LASFIT LED bulbs. Very bright and perfectly compliment the AlphaRex headlights.
Keep It Dirty Off-Road thanks, I just bought the Alpharex but I have Anzos with LED switch back from Diode Dynamic and they were very expensive like 60 bucks for the pair I guess that I’ll keep those with the resistors then
@@VortexVibe634 Yeah you should be fine with the Diode Dynamics and the resistor. Sucks though that theirs requires a resistor. But overall you will be much happier with the look and performance of the Alpha Rex lights.
Keep It Dirty Off-Road ok, got the lights but they made a mistake and sent one black and one jet black, and I just noticed after installing them but I contacted them and they’re sending a gloss one, and it might be that I’m doing something wrong but the planks won’t turn on with the keys and the DRL is just working like my Anzos low beams come on as soon as I put the truck in drive
@@VortexVibe634 I'm not sure I understand what is going on. So to confirm. To confirm, You don't have the DRL's wired using the Add a circuit for the planks right? And right now the DRL's won't come on until you put the car into drive? Is that correct? Anything else come on when you put the truck into drive? Also, what is your goal. Do you want the planks on all the time when the truck is on?
Dude where did you get your ford lettering in white and red?
I think Jason got them from Rappy Graphics. Since this is an aftermarket grill the dimensions are slightly different so you need to let him know ahead of time before ordering.
Custom made at a graphics place out by me. Took the guy a while to get the dimensions right because the "dood" grille lettering is pretty different from the actual raptor grille lettering.
Just adding that the promo code “dirty15” has reached its limit. Still a nice set of lights
Yeah, we heard from a few of you guys. After our last video demand was high and the code was used quickly. We are working on a comparison video to show how these lights perform to stock halogen and stock LEDs. We will have an updated code on next weeks video for you guys. I will be first come first get so make sure you have the bell on and subscribed
I wonder why their price jumped a $180? At that point I think I would spend a little more and get the morimoto XBs
ghostcell030 I think it because demand went way up after SEMA this year so the price stabilized a bit.
We’ve done a comparison to show to crazy output of these lights you should check out first. AlphaRex LED Headlights vs Stock LED's & Halogen
If you do the Marimotos and are in SoCal, let us know. We’ve wanted to do a comparison with them for a while but can’t find anyone willing to come out
@@KeepItDirtyOffRoad yeah definitely. I don't know if I will make it down this summer like i normally do (at least not driving) but maybe if I order them I can have them shipped out to you guys first and you can ship them to me when you're done. I'm super busy at work as of now so I just don't have much time.
@@ghostcell030 Thats the challenge. Everyone is busy and getting out to do a comparison is not easy.
Any lights for f150 2018?
djdnewworld yeah, check out their website. They are nice looking
Another great video. But I think I will stick with the stock Raptor lights. To me they are already unique to the truck.
I was the same mindset. But wait till you see a side by side comparison. The light output from the AlphaRex lights is impressive.
Wait until you see how these compare to stock LED lights! 🤯🤯🤯🤯 insane difference!
@@KeepItDirtyOffRoad Yes I get it. And if I had just the F150 I would change it in a second. These look awesome.
@@davejordan2337
Got rid of my loaded 18 supercrew raptor,got a real truck now.
I did like the led lights though although they are not worth the $1500-$2500 they cost to add to an f150 that didn't come with them.
Stock LEDs are expensive and not worth it considering their light output. We did a side by side comparison and stocks are all dim compared to the Alpharex lights
Could you tell me where you bought the fog lights ,please
The bracket is from Offroad alliance with the pods from GG lighting
@@KeepItDirtyOffRoad thanks 👍
Why did you have to drill a new trim hole?
Nathan Byrne the hole was needed on the new headlight to put that last push pin into place. On newer lights like the one we got for my Raptor, had the hole pre-drilled
Keep It Dirty Off-Road
Thanks buddy. I just ordered a set of these in chrome. Was going to just get the Anzo’s but your videos convinced me on the Alpha’s. Sweet truck and great video!
Nathan Byrne thats awesome man. Glad the video could help. We also have a comparison video with the Morimotos too. There is a 10%off code on that video. Good till the 15th
What bumper is that?
At the time of filming this install, it was a look a like raptor style bumper from American Trucks .com I've since upgraded to an OEM Gen 2 Raptor front bumper.
Where did u get the fuse tab. Thanks
it's a Micro 2 Add a circuit Check my amazon page for a direct link:
www.amazon.com/shop/heliomuro
Can I use the two 10a fuse in it.
Marco&Ethan Dasilva get the tapped fuse from the fuse panel and put it in the front. Then get a new fuse for the lights and put it in the back. Not actually drawing any power mainly looking for an on and off state so you can use anything from a 5-15amp fuse
Thanks a lot for the help.
Does this make it so you dont get a error code on screen
That’s correct, no error codes and not programming required. That applies to the platinums and Raptors too with the LED headlights.
@@KeepItDirtyOffRoad where can I get the correct harness from
My lights I got are not alpha rex and did not come with that wire harness for setting up drl lights
Rob lenox you need to check with the manufacturer man. The AlphaRex harness is designed for the AlphaRex lights only. Will not work on other lights.
Where did you get that decal from ?
What decal do that I can ask Scraptor
@@KeepItDirtyOffRoad the Ford lettering on grill ? Or is it painted ?
No it’s a decal. I think he had to get it custom made. I’ll ask him.
Loving how your Raptor looks man, what size rim and tire are you running if you don't mind me asking?
Running the stock 17in Forged Beadlock capable wheels with the Beedlock ring installed.
Not a raptor,it's a fraptor.
Charles Henson Not a Fraptor, its a Scraptor lol, made with scrap raptor parts! Lol
Does the led turn signal you have orange or white light output?
That’s the cool part of these lights. DRL planks are white. But when you hit the turn signals, the planks change to a sequential Amber turn signal. We will be posting a side by side comparison video with my Raptor so you can see the difference so keep and eye out.
@@KeepItDirtyOffRoad you guys moved the blinker bulb at 15:20 in the video. Does that bulb you moved over produce white light, amber light, or is it a switchback bulb?
@@johnwebb760 The blinker bulbs we moved was a LASFIT Amber LED Turn Signal bulb. Single Color only.
What is the third brake light?
Not sure I understand your question with respects to this video.
There’s a clip at the end of the video of the truck driving away from the camera. The third brake light looks like a raptor take off. I was just curious as to what it is
At 13:48
5.4 productions all the parts on Scraptor truck are Raptor Takeoffs
5.4 productions yes, it is a 100% genuine Raptor 3rd brake light. 🤘🏻
Hi in amazon prime my price is $461 ???
Maybe for the regular headlights, but not the Nova Series lights with the sequential turn signals. Shoot me link of the one you found.
AlphaRex 8000K Xenon/Black For 15-17 Ford F150 Halogen Type Black LED Tube Dual Projector Headlights with Switchback DRL/Sequential Signal/Activation Light www.amazon.com/dp/B07NQ27G6B/ref=cm_sw_r_cp_api_i_XCgoDb2YCBGE8
@@barbaromatos8198 That's the price for the lower end version. The Nova series will run you about $1200.
Why my drl stay on when it’s off
Javier Rivera if they stay on it means that your on an always on Fuse. Need to find one that is key switched. What year is your truck?
2017 f150 xlt
Javier Rivera use the same fuse Jason used in the video. Fuse 97.
I only got 15 and 10 you think work ?? For the tap
Still on tho
Wonder why they dont offer this headlight anymore
Still on their website last I checked 🤷♂️.
@@KeepItDirtyOffRoad nope. these are cool, with the 3 bulb pattern. now the only have one bulb on top with the white diffuser bar
Just checked the site and the Nova series are still there for the 2015-2017 F150 and 2017-2020 raptors🤷♂️. You may be looking at the luxx series. Those reuse you halogen bulbs.
Novas are better.
www.alpharexusa.com/product-category/performance-lighting/?jsf=epro-archive-products&tax=pa_make:215;pa_model:216;pa_fitment-year:225
Now riddle me this Sherlock 🕵️♂️!!!! How come the 09-14 F150 Nova series LED are marked up all the way to $980 now ????
John Doe 🤷♂️ have no clue man. I do know that after SEMA these guys had a massive surge in business. But as far as I know all NOVA series LED are between $900-1200 depending on the model.
Keep It Dirty Off-Road I’m saying because at the end of the video when you are scrolling through the headlights it says $799 . So as they get older they cost more?? I better buy em now before they go to $1200😝😝😝
John Doe I may have caught them during a sale. The company has come a long way. A few months ago they were just starting out. Now they are in the Major wholesale distributors and that means more price control. That could be why the price is up.
We need a new discount code!
I know man. But discount codes are tough this year
He needs the brake lights swapped
The install guy had to be a cbrn marine
ethan5610 yeah he’s a Marine Vet. I’m An AirForce vet so I have no clue what cbrn is. 🤷♂️
Lol, not a CBRN, just a cool tattoo idea i came up with drunk at a bar in my younger years... however i wasnt far from Cherry Point. I was with the first V22's to deploy to iraq and the MEU. 🤘🏻
@@Racerx1023 cool one Vet Retired here
@@JustGreen987 🤘🏻🤘🏻🤘🏻🇺🇸🇺🇸🇺🇸
That engine bay gives me anxiety
😂 why?
Keep It Dirty Off-Road you definitely “keep it dirty” 😂 I know it’s a truck lol looks awesome though
@@bullitt5337 ah ok, yeah, when you offroad things get dirty.
@@bullitt5337 don't worry, it gives me anxiety too 😂😂😂
Nice, but too much $ in my opinion. Im planning on getting the $400 range model, jet black.
Totally worth it though. Stock LED Headlights are way more expensive and don’t have anywhere near the same performance. The Range model you referenced can you provide more details? May be a good comparison in the future.
@@KeepItDirtyOffRoad its the alpharex's pro series. I couldnt remember what it was called last time. Just ordered them yesterday and some LED bulbs, hopefully it'll work cuz i dont feel like doing extra work for an hid conversion.
At that price point, the turning light shouldn't be an incandescent.
I agree with you there. Should be a built in LED.
These lights are incredible! I put them in my 2015 f150 and people flash their lights at me all the time! Its all good because I turn on my brights and drown their brights out bigtime! Don't bother me a bit! Thanks Alpharex!
Brian Phillips yeah, I’ve had the same problem. Consider tuning the lights so they are slightly lower and don’t get blinded.
@@KeepItDirtyOffRoad yea tonight was my first test run. My truck is going back to the shop soon for more upgrades. Maybe I should do a slight tuning myself.
Brian Phillips it’s not too difficult. Will be doing a video on it soon. Quick details are on the midnights install video
@@KeepItDirtyOffRoad Awesome! Can't wait to check it out. Nice truck by the way.
Brian send me the link for the ones you have, hope its the same version like these. I have a 2015 lariat
Mine im haven humededy roblems
What’s kind of problems and how long have you had them?
Quick little story..i followed this video and made a critical error that wasn't really specifically called out here. When connecting to the fuse box with the jumper cable for the DRL you need to put two fuses in the jumper cable.. Not just the one you take out of slot 97. I didn't put two fuses in the jumper. While the DRLs worked, the headlights worked, the truck was throwing several codes. Later while sitting in my truck with the engine on running idle, it starts to over heat.i take it to the dealership and $300 later they tell me about the fuse. Now i can see it in this video when i look close enough and this was my fault. But dude... If the consequences of missing that one particular step of adding two fuses is your engine might over heat, maybe foot stomp it as "hey don't forget this very critical step" not just.. Oh, put this fuse in here.. Following your instructions nearly cost me an engine/a whole new truck. So viewer beware, while this guy technically did show what needed to be done the need to replay you video 5 times over that one area because you weren't specific is extremely negligent. This is a DIY video, the reason why people are watching is because they don't know what they're doing. Do better!
I think you need to watch the video again. Specifically at 3:35. We literally show pulling the fuse from the truck and mounting it on the add a circuit and clearly show both on there. We did not go over the why because we have to assume (for time to keep the video short and watchable) that someone is going to follow our instructions in the video to the letter or 2nd they have experience with add a circuit if they don’t 🤷♂️.
This video is also over 4yrs old and approved by the manufacturer. We get a lot of feedback over the years on other videos that we missed a step or something like that. But it usually comes down to people fast forwarding and skipping ahead. Specially on longer videos. All I can say is to make sure you watch YT videos closely. I use them too and I make sure to give an extra view to sections I don’t know like electrical.
Love the “Made in China” label on the box....I’ll pass
Bill Beverly everything is made in China man. The current lights and electronics on your truck are all made in China. That don’t change the quality of the product anymore. It’s all about the main companies demanding and checking quality. Ford is strict, and AlphaRex is too and have guys at the factory constantly checking.
Even stuff that says Assembled in the US, is made in China man. So that don’t mean anything anymore. Looks at all the electronics in your house, or your phone. All of it is made in China. Don’t have a problem there.
Everything Is made in China
Where a particular product is made isn't the main issue. The standard of quality to which it's manufactured, is. That being said, the quality of the Ford factory headlight housings are manufactured to a higher standard of quality than anything in the aftermarket. Morimoto and Alpharex both have quality control issues, and the customer service from Alpharex could best be described as non existent. While the vast majority of people would agree that factory halogen bulbs are garbage, that's not a fault of the housings they're residing in. I'd sooner take my chances with a quality LED upgrade in the factory housing than spend the time installing aftermarket housings with questionable quality control. Morimoto, Alpharex, Vland, Anzo...the list of complaints goes on. Easily scratched, the planks stopped working after a few weeks, hazing, condensation in the housing. Not worth taking the entire grill assembly off and installing a quality control time bomb, particularly when the customer service from any of these aftermarket companies is lacking to say the least. Good luck filing a warranty claim when no one picks up the phone or responds to your emails. There's always a sacrifice when it comes to aftermarket parts, and unfortunately that usually comes in the form of quality control and customer service.
Haha OK boomer
Jesus clean your truck engine bay Scraptor
😂😂 Keep It Dirty
Keep It Dirty Off-Road that’s not healthy
@@NoonMight lol. its just a light coating. quick wash and it goes away. Just have to find the time to do it.
Keep It Dirty Off-Road my dads f150 had a problem getting too much dusk/sand/dirt into the cold air intake system and overtime it can get clogged and sometimes overheat the engine. Just be careful and take care of your trucks!👍🏻
Blake Christopherson I offroad a lot man. Literally go thru an air filter a month. I keep a close eye on it
When you spend more money making your truck look like something it’s not , rather than buying the actual truck you really want for cheaper 🤔
Not everyone can afford a Raptor man. I was there too a few years ago. Nothing wrong with fixing up any truck to go play in the dirt. Got to get some dirt therapy in how ever you can.
I haven't really spent that much on the truck though, lol. Full Raptor suspension swap for under $900, and now my truck can play with Raptors out in the desert for less than half the price of an actual Raptor, and only being 2WD the truck holds it's own pretty well in comparison. Maybe one day I'll be able to afford a Raptor, but for now I'm enjoying my F150/Raptor hybrid, lol.
Just like the posers on the street who drive around in their imports thinking they have a time attack car.
So you don't have any bolt on mods or mods at all to your wrx?