A little tip for efficiency I learned a long time ago- when I'm cutting around ponds like this one, I'll track down the entire length cutting the top in one pass, then angle the cutter and track back the other way to cut the slope. I'm much quicker when I do that than cutting the top and slope to the waterline in one pass. Of course, that's just me, but it really helped me time-wise.
Trying to determine which way this machine shoots out the most cuttings. So doesn’t clutter up the pond more than necessary. Maybe should sweep in one direction.?
I seen people with brush hogs in my area along the ditch lines like that nail sector blade in one place and then drive the machine 50 or 60 yards and then back it up
Is the spooling sound because you are toggling the cutter off and on? Does the machine not have constant flow capability. It would suck to have to hold the button down the whole time.
trying to find a solution to cutting grass in road side ditches about 1/2 mile just grass and weeds, monthly cutting. Guys with weedeaters isnt safe or fun and takes 40 hrs time. Trying to find a stable, light and good reach mini with a cutter. Need to reach 11' and be able to cut, while tracking even if super slow. Thinking I will need a 3.5-4 ton for stability and a rut or similar base light 30" or so cutter. Any suggestions?
*How much would it cost to rent one of these for a day? Or how much to pay someone to come out to do an 8 Hour Job?* We definitely need to do this on our property, especially with Fire Season at hand!
Great video. What exactly is that pond used for? Is that for stormwater runoff? I live in California so I have no idea what ponds in the south are used to for.
So you have the MTL and you used this machine. Tried to order a MTL but they don’t answer. So we are looking at the Tree Slayer by rut with mulching blades. What do you think of quality
Exelente el Diseño ayudaría a muchos con las malezas que no pueden sacar !! Te recomiendo si querés contactarte con este hombre que está restaurando una casa de 140 años y vaya que necesita una de estas !! Dios te siga bendiciendo y para muchos más abrazo grande !!
Boa tarde , muito boa essa máquina cortadeira , so que tem ter um limitador do corte , para não pegar o chão , como está acontecendo nesse trabalho . Outra coisa ,o corte tem que ser da esquerda para direita , para a grama não cair no lago . Parabéns pelo invento 🇧🇷🇧🇷🇧🇷👍
I hope you didn't give a lot for that thing,, a young guy with a weedeater would be faster, this thing loses momentum as soon as it hits grass and takes a while to recover it's speed..
A worn out plugging bar mower would have mowed that in 15 mins and looked better then that sloppy mess.I do it on our pond tree or four times every summer
5 ⭐'s awesome video 💯 loved it, so is there a takeuchi in the future Elite Earthworks just got a tb2150 it's a beaut. Check it out awesome channel too. God bless from South Carolina upstate viewer
A little tip for efficiency I learned a long time ago- when I'm cutting around ponds like this one, I'll track down the entire length cutting the top in one pass, then angle the cutter and track back the other way to cut the slope. I'm much quicker when I do that than cutting the top and slope to the waterline in one pass. Of course, that's just me, but it really helped me time-wise.
The pond looked great. I just couldn't listen to that machine scream like it was in pain the whole time. Thank u for the video.
Great job on the pond looks fantastic
That's a pretty little pond - now that it's trimmed - great job
Man that thing sound like it’s ready for a overhaul
Junk!
Looks like a retention pond. Great job as usual by the way. 👍👍
Im lmpressed with this cutter/ mulcher
I hope you enjoyed your weekend meeting your new nephews!!! Congratulations!!!
Trying to determine which way this machine shoots out the most cuttings. So doesn’t clutter up the pond more than necessary. Maybe should sweep in one direction.?
Might ought tie up them hydro hoses before you rip em off!
Nice to hear the difference between the mower and mulcher....thanks..
That cutter sounded like it was struggling to spin or the machine was struggling to run that cutter.
Great. Job. Deven
Let's have some fun as usual!🤗🇺🇸👍
Is that machine supposed to make that grinding noise? Sounds like the blade is not fitting correct.
I seen people with brush hogs in my area along the ditch lines like that nail sector blade in one place and then drive the machine 50 or 60 yards and then back it up
It seems that it would be faster to just set the angle of the cutter to that of the pond bank and just drive forward along the bank.
I CONCUR NATHAN. I SUGGESTED THE SAME THING.
He is not in the right position. Hummm I guess each to there own. NICE PACKAGE THOUGH.
Is the spooling sound because you are toggling the cutter off and on? Does the machine not have constant flow capability. It would suck to have to hold the button down the whole time.
SALUDOS DIGIY 4 ANOTHER GREAT VIDEO AS ALWAYS, G.B.Y. TOO BAD THE RAIN DIDN'T LET YOU TO FINISH THE JOB.
Awesome 👍👍👍
trying to find a solution to cutting grass in road side ditches about 1/2 mile just grass and weeds, monthly cutting. Guys with weedeaters isnt safe or fun and takes 40 hrs time. Trying to find a stable, light and good reach mini with a cutter. Need to reach 11' and be able to cut, while tracking even if super slow. Thinking I will need a 3.5-4 ton for stability and a rut or similar base light 30" or so cutter. Any suggestions?
Not sure why you wouldn't cut from the waters edge in every time and limit the mess in the pond.
Good job brother, it’s a lot better. I’d like to see the rut on the U-55 and the XCT-5 on the Tak
Nice job and video like always
See if you can construct a small umbrella that would attached to your tripod that would give your camera some shade
Works well
man that grew up fast
awesome video
NEED FULL ENGINE POWER AN ANGLE BRUSH CUTTER WHERE GET DOWN TO THE SIDE BANK MORE
Glad it's not a hair cut! Rat bites, lol. MTL 👍👍
😁
*How much would it cost to rent one of these for a day? Or how much to pay someone to come out to do an 8 Hour Job?*
We definitely need to do this on our property, especially with Fire Season at hand!
Where are you located?
@@jasonmonroe5981 Bay Area Mountains
Great video. What exactly is that pond used for? Is that for stormwater runoff? I live in California so I have no idea what ponds in the south are used to for.
Trying to decide on a mini excavator or a mini track loader. I have a creek bank that needs cutting
Excavator can be used for more things
So you have the MTL and you used this machine. Tried to order a MTL but they don’t answer. So we are looking at the Tree Slayer by rut with mulching blades. What do you think of quality
Exelente el Diseño ayudaría a muchos con las malezas que no pueden sacar !! Te recomiendo si querés contactarte con este hombre que está restaurando una casa de 140 años y vaya que necesita una de estas !! Dios te siga bendiciendo y para muchos más abrazo grande !!
Muy buen video saludos abrazo grande desde Argentina 👍🤗
How much time to do the pond? Are you paid by hour,machine hour or so much per job?
How is this cutter on blackberry briars?
Boa tarde , muito boa essa máquina cortadeira , so que tem ter um limitador do corte , para não pegar o chão , como está acontecendo nesse trabalho . Outra coisa ,o corte tem que ser da esquerda para direita , para a grama não cair no lago . Parabéns pelo invento 🇧🇷🇧🇷🇧🇷👍
This bank that you're cutting down at about 37 minutes, looks intentional. Maybe someone pushed it up there so water wouldn't flood that field?
Amen~!
👍👍
I would cut left to right to keep the grass out of the pond. But whoever cares about fishermen?
Looking to purchase a 42” cutter for my 305 cat which one do you recommend.for mowing over grown properties
I THINK U NEED USE " DRUM MULCHER " BETTER SMOOTH CUT
I hope you didn't give a lot for that thing,, a young guy with a weedeater would be faster, this thing loses momentum as soon as it hits grass and takes a while to recover it's speed..
Can you get your money back for those
5:13 8:00 10/10 i will hire him
Did you save your receipt ?, maybe you could get your money back.
Junk,!
It belongs to the land owner.
all i can say it is not your kubota
Maybe if you had a real excavator like a 308 cat or 309 you wouldn't have all them problems
A worn out plugging bar mower would have mowed that in 15 mins and looked better then that sloppy mess.I do it on our pond tree or four times every summer
5 ⭐'s awesome video 💯 loved it, so is there a takeuchi in the future Elite Earthworks just got a tb2150 it's a beaut. Check it out awesome channel too. God bless from South Carolina upstate viewer
Flow rate is way to low on the Tak...
Not critisising your work. But you might have been better on the side of the stream .
Too much talking.
You really should be tired of this by now ‼️🤷🏽.
I don’t like it👎🏻
Junk!
Making heavy weather of grading off, Use the blade ,pilot wouldn't do me ,thought it was some kind of protection for flooding .
Ameteur operator.