I was looking for Gammaxx 400 V2 installation for Ryzen but I couldn't find a proper video guide. Thanks mate for making this video. I'll watch it again once my cooler is delivered.
The music from this video helped to soothe my rage from the half-dozen previous videos that failed to show how to connect the RGB cable to the motherboard. I tip my hat to you sir
I've been looking for quite a few hours now on what is the difference between the GT line ups, then boom I saw it on the first few seconds of your video, thank you for this
this helped man im getting the cooler but white version was using the stock cooler for a while its too hot so I decided to buy an aftermarket this helped with installing it
Does anyone know if the DEEP COOL GAMMAXX GT A-RGB Cooler will work on a MSI b450 Motherboard ? I'm taalking about the RGB function. appreciate your help
So many people asking if it will fit in their case. No offense, but hardware reviewers don't have every case lying around to check. Googling the make/model for compatability is what they would have to do as well. Wouldn't take long for one, but it sure would for this many.
This Air cooler is quite nice and keeps temperatures under control quite easily for my 5700x, BUT I find it extremely annoying that Deep Cool doesnt send two more clamps to use another 120mm fan, absolutely unecessary
@@OdinHardware I figured it out, one fan cable goes to the CPU fan header. The other cable from the fan and heatskin are for RGB and need to be connected together and then connected to the RGB 12v connector. The RGB on this thing sucks tho and it can't handle certain effects.
I got a prebuilt that came with this cooler and I was wondering where the rgb header is so I can change the colors of it. What I mean is, is it above the cooler, to the left/right, below it, or on the back of the pc.
it's been 3 months since I have bought this cooler, suddenly nowadays during stress tests, I get average temperature around 82C... earlier it was 75..what should i do?
I just realized that the cpu cooler is kinda crooked, got mine last week and i noticed from the front mesh that the cooler isnt straight, great temps tho i think its ok
I don't know. Can i speak with you? So, i don't how many pins are. But is from gigabyte. I downloaded gygabyte 2.0 software for rgb. But is detecting only the rams. I tried asus and msi one but it the same, what to do
gammaxx 400, gammaxx gt, gammaxx gte?............... which one the best? .......im confused because the gammaxx has so many models which one is the best?.
I have the same one but can't get rgb fusion to recognize and customize the rgb. Gigabyte b365 HD3 if it matters. Doesn't recognize gpu either, but was wondering if you had any issues with the fan itself and I'd you had fixes?
@@OdinHardware I downloaded warzone and I am getting 81c in stock cooler (ryzen 5 3600), according to you, what would be my temperature after fitting this Cooler?
![How To Install Deepcool Gammaxx 400 v2 / 400s CPU Cooler on Intel & AMD Socket? [Installation Demo]](http://i.ytimg.com/vi/IcpeSGW7ivA/mqdefault.jpg)
![How To Install Deepcool Gammaxx 400 v2 / 400s CPU Cooler on Intel & AMD Socket? [Installation Demo]](/img/tr.png)
I was looking for Gammaxx 400 V2 installation for Ryzen but I couldn't find a proper video guide. Thanks mate for making this video. I'll watch it again once my cooler is delivered.
Feel happy to know this
cooler master same property rgb is 50, this one is only 30. bought it on sale for 22.99 usd
@@OdinHardware thanks for telling me how to install. nice video
The music from this video helped to soothe my rage from the half-dozen previous videos that failed to show how to connect the RGB cable to the motherboard. I tip my hat to you sir
Feel very happy to know this.
😍
Dude, thanks for making a nice, simple, relaxing video that doesn't have techno music blaring the whole time ♥
Thanks a lot for mentioning it
Yeah
I've been looking for quite a few hours now on what is the difference between the GT line ups, then boom I saw it on the first few seconds of your video, thank you for this
👍
wtf i only can see pink screen in whole video
This channel will be big someday, keep up the content mate, i'll be cheering for you
Thanks a lot. I'm immensely motivated after reading your comment.
Thanks. ❤
Thank you, this should be the official installation video
Thanks ❤
Nice one, Odin. Very helpful.
Considering this Cooler in my next upgrade (may buy tomorrow), so good on you for this 👍🏼
Thanks for the comment. Yes this is good for the money
It looks very easy to install, thanks for the tutorial now I will wait when I have my pc to apply this tutorial
👍👍
Just came home after buying it, thanks for the installation guide
😀
where do you connect the extra 4 pin cable from the rgb ? the extra 4 pin cable that you left on 6:51
It goes to the rgb header(4 pin) in the motherboard.
Thanks for the video! I was able to find out that I was missing the RGB extension/cable that came with the package to connect to the motherboard
Best guide. I will be using it to install my gammax 400 v2.
👍👍
Thank you, I will wait to have my pc and when I have it I will return to this video to install the heatsink
Thanks ❤ you will come back soon
this helped man im getting the cooler but white version was using the stock cooler for a while its too hot so I decided to buy an aftermarket this helped with installing it
Yes, it's much better than stock cooler
@@OdinHardware yeh i already installed it and my temp is so good 60-70 underload used to be 85 higher
maybe that much thermal paste was too less
Bro this video helped me so much man thanks a loadzz ❤️
Welcome 🙏
whoa this is actually pretty good.
I can't make those screws at 5:39 to fit, anyone know why is that?? :(((( they just don't fit
the best video! Thank you!!!
Welcome
Does anyone know if the DEEP COOL GAMMAXX GT A-RGB Cooler will work on a MSI b450 Motherboard ? I'm taalking about the RGB function. appreciate your help
Work only 3 pin argb header motherboard
Exact model please
So i got it to work with a 12v4pin... 😒 I dont know, why people say, i need a 3 pin 5v
3300x in 28° ambient room temp max load
stock cooler - 88° to 90° celcius
gammaxx 400 - 72° to 73° celcius
Cool
@@OdinHardware is it ok ?
This is exactly what i need
Dude I still don’t understand where do I have to put the cables
Thank's my brother!
👍👍
Great video! I have this same cooling fan and was wondering how to take it off to change out my cpu. Doesn't look difficult at all. Thank you!
It's very easy. You can do it
Yup I did it. I now have an i9. Thank you for the confidence Odin!
So many people asking if it will fit in their case. No offense, but hardware reviewers don't have every case lying around to check. Googling the make/model for compatability is what they would have to do as well. Wouldn't take long for one, but it sure would for this many.
I see not even 10
Buen video, gracias. saludos from Chile.
💞
This Air cooler is quite nice and keeps temperatures under control quite easily for my 5700x, BUT I find it extremely annoying that Deep Cool doesnt send two more clamps to use another 120mm fan, absolutely unecessary
Yes, two more clips will be more complete package
no thermo paste?
Yes, I applied . It comes along with the cooler in small separate bag
How tight those screws that go on the motherboards should be? Do you use a bit of force?
Little force is enough, i.e. till it stops rotating
I don't understandsertand the cable system. One is connected to the heatsink and there are two on the fan. Where do these go?
One connector is for the power(connect it to motherboard fan header)
And other is for Rgb light control(rgb header,4 pin on the motherboard)
@@OdinHardware I figured it out, one fan cable goes to the CPU fan header. The other cable from the fan and heatskin are for RGB and need to be connected together and then connected to the RGB 12v connector. The RGB on this thing sucks tho and it can't handle certain effects.
excuse me bro, i can remove the fan and add another one in ARGB?
Yes it's possible but you will only one fam clip with this cooler. How will you add another one ?
I got a prebuilt that came with this cooler and I was wondering where the rgb header is so I can change the colors of it. What I mean is, is it above the cooler, to the left/right, below it, or on the back of the pc.
It's attached to the fan
Could you use the stock metalic Back Plate instead the plastic´s gammax back plate ?
No, it won't work
it's been 3 months since I have bought this cooler, suddenly nowadays during stress tests, I get average temperature around 82C... earlier it was 75..what should i do?
Is the fan speed at maximum level?
Winter/Summer scenario?
Check the thermal paste... You probably didn't put enough?
Excelente vídeo!
Thanks 👍
If you don't have DeepCool AG400 LED then Deepcool Gammaxx GTE V2
?
When I installed the bracket it still wobbled but it doesn’t when I screws the cpu heat sink down is that normal for that bracket
Yes normal, after tightening the screws it will become stiff
Hey. You don’t know why it don’t working with colors ?
Have the cooler but not the bracket what should i do any aftermarket bracket that will work for this cooler?
It's very difficult to get it especially India. Contact deepcool support center
I need help i got one of these cpu coolers and for me it only lights up white what do I do?
You should connect the RGB pin motherboard RGB header and then control via motherboard RGB software
@@OdinHardware Thanks I will try this :)
will this cpu cooler give me clearnance for all four ram slots to be filled with high profile ram sticks?
Yes it will cause, but you can adjust fan height
I just realized that the cpu cooler is kinda crooked, got mine last week and i noticed from the front mesh that the cooler isnt straight, great temps tho i think its ok
Should blame quality control
A very good video. Thank you very much.
🙏👍🏽
Bro is this 4 pin rgb header will rgb work with my msi b450m mortar max. My mortar max has Jrgb 4 pin please answer brooo tyyy
It will work
@@OdinHardware thanks bro
You put the clips for the fan on the wrong hole, it's the one nearest the radiator not the outside ones.
nah, both is correct, just see the deepcool website, the clips its on the front, not the back
True, But looks better on the inside much cleaner, good video tho
Was the cpu plate at the bottom a slightly bent/slant rather than being totally straight i.e. 180 or 90 degress?
Straight, but it will bend slightly after installation
if you just connect the 4 pin for powering the cooler, will it light up with the default color (example red)?
I don't think so
Can I control the Rgb of this cooler if I have a Z390 Gamin x motherboard? And if yes, please say how
You can control it via motherboard software. Make sure the motherboard has four pin RGB header
I don't know. Can i speak with you? So, i don't how many pins are. But is from gigabyte. I downloaded gygabyte 2.0 software for rgb. But is detecting only the rams. I tried asus and msi one but it the same, what to do
Where did you plug the rgb control connector? :(( i’m confused because there’s multiple pins on my motherboard
Connect to 4 pin rgb header on the motherboard
Where i can get a second fan, for a pull&push build?
Any 120mm brand should fit but gte v2 doesn't provide any extra clamps for second fan
is that RGB color controlable?
Yes, via motherboard software
Trae la bincha extra para poner otro ventilador es push and pull?
Can the given fan be replaced by another fan as long as it is a 120mm fan? Regardless of the speed and etc of the new fan?
Yes possible. Make sure the thickness is same
But this model doesn't supply that extra clip for adding second fan
Is the temperature difference big for Ryzen 5 3400G with Wraith Spire?
Not huge
@@OdinHardware thank you. Maybe I will hold on to this cooler for a while.
Hello, is it enough thermal paste at 4:35?
Enough
Also you apply evenly on thw cpu surface ,(as suggested by one user) and it will reduce one or two degrees
@@OdinHardware Thank you! I've ordered the same cooler. I watched your video for preparation. It's so helpful.
nah i swear i didn't get any of this stuff that you put next to the AM4 thingy n that
Excellent cooler, not expensive. I use it for I5 12400F (65W, boost 125W, Cooler 180W) CPU and rarly go above 55C even after stres test or gaming.
Absolutely a value for money cooler. Much better than hyper 212 in terms of money/performance ratio
Thanks for the info!
what software do you use to change the RGB? Having trouble finding one that will detect the cooler and allow me to chnage the color
I used motherboard rgb tool
Could the rgb cable connector plugged into rgb controller? Since my motherboard does not support rgb header/sync.
Yes
my motherboard does not have inputs for rgb 12v, 5v, or other. what do I do?
Can't do anything. Use should use RGB controller separately
Does thermal paste come with it ??
Yes
Should we have to put thermal paste again?
If Thermal paste is not preapllied on the cooler, then you must apply manually
@@OdinHardware can you please show how to remove the fans and the cpu pls
gammaxx 400, gammaxx gt, gammaxx gte?............... which one the best? .......im confused because the gammaxx has so many models which one is the best?.
Gamma gt,gte are all same in performance except the features I.e. rgb fan , fan controller,..
If I have MSI Motherboard, and I use ASUS Aura Sync for RGB Control of my peripherals, will it work if I also use Asus Aura for the CPU cooler?
Not sure 😕
@@OdinHardware Thanks for the reply sir! ;)
Can i change the fan?
Not sure if you have a decibel reader or not, but how loud does the fan get?
It's quiet
Hi, I know I'm a little late, but can the RGB still works even though my MOBO doesn't have RGB Header?
You can't change color
@@OdinHardware Thank you for the reply. And indeed I can't change the color.
Your video is si good i have a question can i turn off the rgb? Or without connect the rgb cable the prblem is solved?
Yes you can turn it off via motherboard software. Not sure about unplugging the rgb cable
If I add another fan on it will it become better than 400 Pro or similar?
As I know there is like 1°-2° difference
Similar results
Depois q instalei no meu pc o audio ficou chiando
its ready for lga 1200?? Intel 10400f exactly
Yes
Hey. If I connect this to an rgb header of my motherboard and not an rgb controller, how do I control the lights? Some software?
Via motherboard software
I have the same one but can't get rgb fusion to recognize and customize the rgb. Gigabyte b365 HD3 if it matters. Doesn't recognize gpu either, but was wondering if you had any issues with the fan itself and I'd you had fixes?
With wich logiciel can i change the RGB ?
Great video btw
light is fixed. you can swap with rgb fan
Can we change the colour to cyan only??cyan is my fav but i see there RGB is changing
Yes you can choose the static option(cyan)
Hello bro I have the same one but my msi motherboard software doesn't recognise it so I am unable to change lighting. Please help if you know any fix.
Use dragon center software
@@OdinHardware My dragon center says blocked by firewall what do I do? Im just trying to turn off the led fan
Pwede pa sir lagyan ng isang fan sa kabila kagaya ng nasa 400 EX version?
where do you plug the rgb to motherboard?
Yes, to motherboard RGB pin header
Nicely done 🙏🙏
Thanks for the comment
i just bought this today and installed it and it made my cpu temp lower like 10c lower
From stealth or spire ?
@@OdinHardware the one u have but black
@@OdinHardware I downloaded warzone and I am getting 81c in stock cooler (ryzen 5 3600), according to you, what would be my temperature after fitting this Cooler?
*will it fit MSI MAG X570 TOMAHAWK WIFI motherboard* *Will it provide enough cooling for overclocking RYZEN 5 5600x* ?
It's fine for 5600x at stock speeds/settings. If you manually tweak the voltage I.e reduce vcore volt for oc, then it okay for 5600x overclock
@@OdinHardware ok thanks for confirming.👍
Alguém aí sabe me falar se eu instalar ele na placa mãe sabertooth 990fx rev2.0, eu perco 1 slot de memória ???
Hi how do iturn off lights😊😊
Not possible. But you can change fans with rgb
Is that enough thermal paste ?
Yes, you can also apply little bit more
Thanks for video. Can i use razer chroma app to control rgb?
Not sure, haven't tried yet
Think this would be good for ryzen 5 5600x?
Fine
Can you still use the first ram slot once this cooler is installed?
Yes
What is the difference between this and the Gammaxx 400 v2?
Should be aesthetics
How do you change the RGB lights?
Through Motherboard software
This cooler argb or rgb? The site says rgb, can I make one backlight on the cooler and DEEPCOOL MATREXX 55 MESH ADD-RGB 4F?
This cooler is rgb. So, all the lighting effects won't work when synced with matrexx 55
Hi man is this enough for ryzen 7 5700x? Now i have noua akari pro and in game bf 2042 my temps are around 83° 85°
Yes manageable. Definitely better than the existing setup
@@OdinHardware ok thanks
@@OdinHardware today is arrived and now the temp are 70 72° it's a beast
Is that upper fan in your cabinet intake or exhaust??? Please reply
Exhaust
This is an overkill for 12400. You don't need anything more than Gammax 400 V2 or AG400, if you want to spend more
name case?
Brother how did you set it to changing colors?
Used motherboard software
Can you turn off the rgb completely?
Yes
Would this cpu cooler be enough for an overclocked 10700k?
Definitely not enough
Hey bro does it support lga 1200 looking for i5 10400
Yes, it will support
Would this work good for i5 9400
Very good for 9400
@@OdinHardware well hello how about brand new lga 1200 sockets i5 10400f? Will fit or not
@@workitwillis2499 Yeah.. that's my cpu as well