Top 9 Best BMX 2pc Bars

Helpful Resources for BMX Nerds ➡️ linktr.ee/dougsterbob
💬 Join the BMX Nerd Network: geni.us/nerd-network-invite
❓ | Ask your BMX Questions
📸 | Show off your bike
📈 | Learn new tricks
⭐️ | Join a thriving community
Request a BMX Recommendation: bmxnerds.com/bmx-match-maker/
Stolen Roll Bars: bit.ly/3S07R1O
Fast and Loose Bars: bit.ly/41HH8dt
Odyssey Broc Bars: bit.ly/3tzEzO3
Shadow Vultus Featherweight: bit.ly/3GYHbbB
Kink Rex Bars: bit.ly/3Hl5Bw9
Colony Sweet Tooth Bars: bit.ly/3GZMRBV
BSD ALVX Bars: bit.ly/3H1yixW
Subrosa Ray Bars: bit.ly/41IHReM
Mission Command Bars: bit.ly/3vfWpGl

[@yourcommenthasbeenremoved]

all stolen parts break but will never get stolen 😂

[@pauljames4510]

I recommend Fiend Garrett Reynolds bars they come in 27” wide so you don’t have to cut them down or if you’re a tall person I recommend the Shadow vultus SG bars in 11” rise 👍🚲💨

[@cjwood2407]

If weight is a big concern or point that you based the ratings on I would consider hitting up a shop with a scale and actually weigh them instead of relying on the advertised weight. Almost every brand is off by a substantial amount on the weight of all their parts from tires to frames and everything in between with a few exceptions that we found in our shop on boredom days. we found 3 brands if I recall that most of their products advertised weight was accurate or even very close too. some bars for example that should have been 2.1lbs were actually 2.65lbs and some even higher. frames advertised as 5lbs - 5.2lbs that were 5.5lbs and up, tires that are half a pound heavier than advertised, etc... I'll call out one brand even though I like their products and ride them personally but weigh a set of BSD acid v2 or jonesin forks and then look at the advertised weight. You will learn why your front end feels so much heavier than it should.

[@alied7682]

I ain’t reading allat

[@Tingley19]

@@alied7682tldr bmx companies Jew you. Do your own research.

[@JackTheGinger]

Yes agreed

[@PublicShenanigans]

Is there any reason the Fiend Reynolds signature/ team bars was not on the list? From my research they seem to be one of the lightest, they’re butted and heat treated and are already the width most like to cut them down too.

[@anester1866]

I know Haro isnt at the top anymore. but i just got their Baseline 2 piece bars, full chromoly for only $35. you cant go wrong with that.

[@joelmunz812]

I ride them too, had the basline 4pc before both great Bars last long and are cheap plus for a full cromoly bar definetly that heavy. Some of the best cheap Bars in my Oppinion

[@joelmunz812]

not that heavy *

[@augmented2nd666]

My S&M Perfect 10's I've had since they first came out, Still havent bent or cracked and they've seen alot of abuse. I want to say I've had them over a decade, I just know I got them when they first dropped and never changed bars, they just work.

[@vladimreentry]

6 feet tall and ride a 7.8 bar with frontload and 35mm offset fork. I see brands sometimes make low bars and thats so good, but unfortunately its so hard to get brand new bar under 8.5. You are lucky.

[@EdyStauch]

I'm looking for Fiend Team bars. It's light and I think it's strong enough.

[@demacherius1]

What do you think about the eclat Morrow bars? Searching for 10" bars that don't weight more than my frame.

[@erctaylor023]

I rode a 9.5 bars with a topload stem, and yes it felt great but it seems I can't hop that high and finding feeble hard 180's a bit more challenging, so I switched from topload to frontload to make my bars lower. from that I feels good to do hops and stuff.. bought a 9.25 bars and felt better...

[@kirkwickham3336]

10" Kink Hulk bar has entered chat.

[@doubletire]

S&M Fu bars fo life! I love my 10 inch fu bars. The tubing is a lil thicker. They flex less so there isnt as mutch rebound on hard landings. My wrists like that. Also taller bars are good for lower back 🤘

[@yourcommenthasbeenremoved]

u can add to your bars width heres how u gather all the 19mm crank spacers u can find ull only need 2 or 3 prlly per side ,,, slide them over your odi bar ends thro some electiv tape over it an slide it in ,, i ran bars ends like this for years 😂

[@samuellehtinen8079]

no s and m?!

[@astrqlogy]

Opinion on BSD Safari bars?

[@wavybabylive]

Can you make one for 4 piece bars please

[@theunbreakable1587]

I think taller bars make it so that you can't pull up the front tire as high off the ground as you can with shorter bars. I'm 6' tall and I like 9" to 9.25" max.

[@anti7928]

S&M Perfect 10 bars for me i like to sit up when i ride but im old so......

[@GFEBMX]

best bars ever made
1.animal bob scerbo bars
2.the make crew bars
3.GT classic four piece
4.skapegoat bob scerbo bars

[@michaelcrighter]

I really enjoy these videos. My only gripe is the alert noise used for specs. Makes my head hurt hearing it but that's just a pointless bitch on my end but wanted to add

[@patricks.6655]

I run the bsd alvx 9.5 inch bar . Bsd never dissapoint me

[@slr_omatikaya7361]

Kink has multiple bars models. They are the same geometry, except size, so if u don’t like 9’5 option u can buy different model

[@RAFAELHCASTROROBLEDO]

what about Cult Crew Bars?

[@jaredappleseed7037]

I realize the standard strip bars are never in stock but, no s&m and no standard bars, the term "top" and "best" used very loosely here

[@bmxnerds]

S&M should be on the list of worst bars. Only available in ridiculously tall ride and wacky geometry

[@user-ye6cs7bp5p]

Odsy broc 9.8 😊

[@davei6452]

Not having snm is wild

[@yourcommenthasbeenremoved]

i got the sweet tooth bars frm dans last summer they sent me used bars as new 😮😢 cancel dans comp

[@Tsudkyk]

The pop pop sound effect is way too loud.