Mission Style Upholstery - Part 1
Вставка
- Опубліковано 9 лют 2025
- This video details the upholstery of a Mission Style oak rocker from start to finish. Learn how to tie down springs, use wood wool for stuffing, and covering the seat with vinyl. Along the way, I show tips and techniques that I hope you can benefit from in your journey as an upholsterer.
I have a rocker almost identical and I want to recover the seat. This has been so helpful. You are truly an amazing craftsman.
The best video I have seen on "how to do something", you are a true professional, and craftsman!
It is rare to find a person who shares as much knowledge as you do, sir. Most want to sell you something, and others overwhelm you. Your patience and generosity are truly commendable. We thank you for allowing us to benefit from your artistry.
***** My thanks to you and everyone for the kind words.
Welcome to my UA-cam channel. Give me your opinion on my jobs upholstery.
my chanel is . hicham lougrat .
Lovely to see a true craftsman work and explaining as you go hope my project turns out as well, thank you very much. X
This is beautiful and should be teaching in every school on the planet. Thanks for sharing your art sir.
Hi thanks for this and your other videos. Your channel was one of the videos I watched to fix our Victorian style couch. The webbing had failed and the springs were all over the place. Now we can sit on it again hand not worry about falling through. Thanks!!
I watched all four videos. I didn’t realize what an amazing art this is. Beautiful work!
Welcome to my UA-cam channel. Give me your opinion on my jobs upholstery.
my chanel is . hicham lougrat .
Real upholsterers are few and far between. This guy is a good one.
What an amazing and generous video !!! Beautifull work and excelent camera operator !!! Congratulations !!!
Perfect! Best video yet. Now I’m confident I can redo my settee. Thanks so much
A lost art? Beautiful to watch a true craftsman!
Welcome to my UA-cam channel( hicham lougrat ) . Give me your opinion on my jobs upholstery.
What a great video. Your explanations and photography make it all seem so easy. And while I know it won't be I'm looking forward to trying my luck. Thanks so much
thank you very much this is just the information that I need!
I love how you share little stories (like the flour sack with the truck) while you work! Too many videographers tell about pulling the tacks for ten or fifteen minutes. Great job on both the chair and the video.
I like seeing all the different tools you use. Thanks for this in depth view of what all goes into upholstering a chair. I've watched all 4 videos and the work is just beautiful. Thanks again.
Thanks for being so upfront. It just looked so much easier than the sew on method.. Oh well back to work. Thanks again. 😊
Thank you for your easy and relaxed explanation, I enjoyed watching and now I feel comfortable taking on my project. Thanks Again ... I am subscribed.
+carolyn williams Thank you!
Welcome to my UA-cam channel
. hicham lougrat . Give me your opinion on my jobs upholstery.
This was not what I looking for but beautifully done, I love to see the unseen parts being done as neatly as the seen bits, great to watch.
I'm redoing a cheap old couch that I love in spite of being so very cheap. I'm using sinuous springs bridged with wire, but for a split second I considered trying to do an eight way tie. It's really lovely to be able to see the whole process.
Coiled springs will give you far better results.
Thank you for a very informative and well explained video,some great tips
Excellent eight way tie in this video. Bill Chagnon
Old school !!!
Que linda sequencia de vídeos, estofado como meu pai fazia, obrigado por compartilhar esses vídeos!
Excellent video! Would love to see you replace wood on a chair where the tacks/nails have chewed it up. That's what I am dealing with. This darn chair must have been redone several times.
Wow just came across your Chanel so glad I did you do fantastic work I like the way your shop is paid out could you do a video on it as I'm getting ready to re do mine or reorganize it for the upteenth time thanks
Something for me to think about. We're always needing ideas to play with. Thanks for tuning in.
Thanks bro! I’m giving it a shot.
Brilliant craftsman!
Muito obrigado por compartilhar seus conhecimentos conosco.
Estou assistindo pela segunda vez todos os seus vídeos.
Aqui no Brasil não tem um curso com este nível.
Thank you for sharing your Master knowledge
Excelente vídeo , me encantó manos a la obra
Very good 👍👏
excellent video.
A master of arts.
I am getting ready to reupholster a rocking chair exactly like the one you are working on. I have already taken out all the staples, tacks and the springs. I am learning so much from your video and was wondering where Mission Style Upholstery - Part 2 is. I really need to see how you apply the batting and foam. I see you have Part 3 and 4.
I am glad you are getting use out of the videos. Here is part 2 - ua-cam.com/video/aW1Oe35OE6c/v-deo.html
Felicidades por todo el esmero puesto en este trabajo !!!!Mi familia por mas de 40 años se a dedicado a fabicar sofas y sofas cama y claro tenemos el servicio de Re-Tapizado es una actividad muy grata se conocen a muchas familias y en ocasiones los clientes piden trabajos que llegan a resultados geniales les comparto uno de mis trabajos saludos afectuosos desde la Ciudad de México.
@
Where can I order some seat springs for upholstery? Thanks to your videos I have been trying to pick up this fascinating trade
Contact me via my website for more information.
I appreciate the kind words. Thank you for watching.
I just took the bottom out of my rocking chair. The upholstery straps are cris-cross wire with individual springs. The vertical wire is good and intact. But the cross wire hooks into the frame of the chair are broken off. So basically I have a what you are using. I am wondering if I clean the metal ends up, could I tie the springs like you are doing? The springs are in good shape as is the wire that it is attached to, or would you buy 3 new strap springs?
Having a hard time finding some at a reasonable price.
Buy new springs.
@@Buckminsterupholstery ok
תודה רבה לך אלוף יפה מאד. עבודה יפה thank you end shalom from israel
I love this video. Thank you for sharing your Technics. I love to work with my hands and have self taught myself a few things but would love to further my knowledge in hopes of making a career out of doing something I love. Can you give me any advise or recommendations of where to start?
+Belinda Armenteros Contact me via my website. Thanks, Kim
Oh! I forgot to ask, the springs that have the metal bar attached to them where can I get those.. Thanks. 😊
I am so excited to find your videos. Thank you. I would like to redo my grandmother's rocking chair, and it is VERY similar to the one in your demonstration. Hers has a leather section across the back. Do you have any secrets for that? I am figuring it won't be as hard as the seat, and I'll just try to copy what's already there.
My Eastlake chair series will be of help. Contact me via my website for further information.
Thank you for sharing.
hi there,
great instructive video of your fine craftsmanship. where is the best place to get all of the supplies (coils on struts, wood wool, ticking, etc...?
Many of my distributors sell only to people in the trade with tax exempt status. Your question is too broad as I buy products from a number of places. Contact me via my website for more information.
HI,
I've found suppliers of similar materials as used by you on-line. I've also watched other reupholstery videos on youtube. No one does it authentically as you do; not even close. I have refurbished many things (I enjoy it) but am no professional. However, I do recognize quality when I see it and am happy to watch your other videos after seeing you reupholster the mission rocker. I find it, weirdly, relaxing. (I do not have this same enjoyment watching "hacks.") Perhaps because you have a relaxed approach; this is not to imply that you are carefree as I see you as being very thorough, careful and professional. The proof, as they say, is in the pudding. The finished product is always top notch! Well done. Thank you for taking the time to help those of us DIY'ers.
My thanks extended to you for your kind words. My son-in-law and I appreciate hearing from people. More videos are ready for editing. Stay tuned.
I’m so grateful to find your channel, too! I’m looking forward to beginning another path of work and learning. Have dabbled in sewing and fixing and creating, so your shared knowledge is invaluable to me. Your work is precision in motion--Thank you! 🔨
I love your videos. It so easy to see what you are doing. How do I tie in an edge wire for the front only of an old settee? What gauge is the wire? It was pretty much ruined when I found it, stuffed with straw and springs hanging out the bottom. I've just sewn the springs onto the webbing.
Contact me via my website and we can hook up via email.
Absolutely relaxing video. I am attempting to restore a mission style armchair. It is an early 20th century Stratford Chair Co. (Ontario) chair. It once had a gorgeous mission pattern upholstery. I am thinking on trying leather. One question.....”spring back nails” (it sounded like that’s what you said) that you used to reattach the spring bars? Is that a special nail? Thanks again for this timely video......Bravo-Zulu on a job well done in instructing by example!
Contact me via my website for more information. Thanks.
Nice 👍
Do you have to use new springs? I have a chair with 4 springs and I'm thinking of just reusing them.
As long as they aren't bent and they still stand upright they should be OK.
@@Buckminsterupholstery Thank you! This is my first time using springs and I think it will be fun! I use to work at an upholstery shop sewing but now retired I've gone on to reupholster chairs I have bought second hand and they have made my home so enjoyable! Why buy new furniture when you can make it the way you like it better!
I have the same chair but one section of the Springs has a broken Spring or two. It has been awhile since I looked at it. Do you have a suggestion on where to replace the Spring section or individual springs? Thank You!
why or when do you decide to replace springs. I am getting ready to redo a rocking chairs and the springs look ok to me. any advice would be appreciated.
Many variables. Contact me via my website with/for more detailed information.
Thank you soooo much!
I have learned a lot through your videos. I have a question, have you ever uncovered a wooden chair frame that appears to have too many holes to grab the staples. If so, do you have a way to reinforce or fill the holes in the wood?
Thanks in advance
This is a problem that can be hard to solve. I don't know of a good filler. If you fill the cracks with an epoxy it's hardens too much to let staples penetrate. The staples either bend or the wood splits even more. Replacing the wood is the best option. In cases where there is exposed wood finish a person can disassemble the frame, cut the top nailing portion off and add a new wood strip.
@@Buckminsterupholstery Thank you
I like how you are doing this kind of old style. I saved a captains chair and am going to learn how to upholster by doing it. It already has the springs, not sure i need to remove. where do you buy the italian rope?
Try an area upholstery shop. Ask for Ruby Italian hemp spring twine. You can get it in a one pound ball. Seems there is also a DIY Upholstery Supply online.
Realmente muito boa como suas aulas.
Parabéns pela excelente aula técnica.
Muito obrigado
that's good job..!!
Great videos! Thanks for holding my hand! I am willing to try this. When you buy the Strap Springs or Bar Springs, how do you measure them? My cushion box inside lengths are 16.25" in the center and 15.25" in the side. I am figuring on using 3 sets of bar springs.
Strap springs are sold "hole to hole" regarding nail placement over the rail. They can be bent inward or outward to adjust to your frame opening. They can be placed across the side rails rather than front to back if it works better with your dimensions. Most generally standard sized straps fit this style of chair front to back.
Great Thanks! This is very helpful.
That’s a very different type of tack puller. Is it still available on the market?
The Berry staple lifter is available from most upholstery supply companies. My first choice for nearly 50 years.
Hi, thanks for sharing. How do you know if a spring needs to be replaced or simply reset?
Most generally springs in chairs like these have lost resilience, are sometimes bent, maybe straps sagging. For no more than they cost and the amount of time it takes to retie them, it makes good sense to replace them.
@@Buckminsterupholstery many thanks for your reply. Getting supplies in New Zealand is usually on line and not much option for suppliers, so I will hunt around and find some replacements. Thanks. Love watching you work. Many thanks.
Where can i buy the springs on rails like tht plz??
Van Dykes Restorers
Hi again, the mission style chair in part 1, my question is where can I buy the type of springs on the chair you are working on. (Springs with the metal bar attached to them) Thanks again, love your site!
contact me here ... hipster73@hotmail.com
+Buckminster Upholstery Hi you asked me to contact you. I guess it's about the question I had for you about the (springs that are attracted to the metal bars..
Id like to think I can do this although I'm not feeling very confident😳 I've got 6 chairs! I'm wondering if the springs are absolutely necessary, or if there's a way around having to use them? Thank you!
Very nice work, one question, why do you double tie, top of spring.
Michael Leo Paglia Stronger is better.
Buckminster Upholstery so you feel that a single piece of cord is not strong enough, is that just your preference, or would most upholsterers do it that way.
I work for the company that made those Ridgid bar seat strips as a matter of a fact I made the springs that went on them bars. Barber manufacturing in Anderson Indiana we have been making quality coils since 1893. Look us up on the web. We are a custom shop we make them how you want them,
Thanks for the information. I sometimes run into special needs. I used to get straps that worked perfectly in 20's and 30's frames. Offset rows of springs with the front one an inch taller. The rear spring was set ahead of the lumbar support rail. There have been times I've only needed the tapered coil springs and removed them from the strap.
Buckminster Upholstery we make springs from 3" tall up to 8" tall in single cone which is what you got here. We also make double cone springs from 3" tall up to 12" tall. Wire gages from 8gage to 13gage. We are a custom order family owned shop that build to suit your needs. Barber manufacturing company since 1893
I have my grandpas rocker...its upholstered just like that "mission style"....
But, the wood is broken from so many redos....
How do i fix it ?
Contact me via my website for more information.
What are "spring up nails" for the spring piece and where can I get them?
Also called EK clip nails available through upholstery supply companies.
What kind of glue do you suggest if I'm using a trim to glue down instead of finishing tacks?
what is the purpose of the string on the springs? is it to help it hold in place so they don't move?
In case others wonder, seems the reason for this is to connect all the springs together so they move as a single unit and it also gives the seat its shape. Because of this, I suppose it would be worth keeping in mind that you can over/under tie them which will affect the bounce?
I have a rocking chair just like this I want to reupholster. Where do you find the springs?
Elizabeth Rackes Van Dyke's Restorers
A chunk of wood broke off. It is where the springs attach. How do I reinforce that part of the chair without having to replace the whole front of the chair?
Contact me via my website for more information.
where can I buy the grimping tool that attaches the springs to the jute bands.
Taking the upholstery apart can takes hours and hours.... Do you use wood filler for all the previous tack holes if it gets out of hand with the wood? Thanks for you instructions.
Most wood fillers aren't effective in repairing tack holes.
Thanks for taking time to reply, Saved me hours. I love the way you show your craft so clearly, without any stress in your voice. Showing a lot of patience, do things, ever go wrong?
What supply company sells the new springs?
These springs are getting difficult to find. Try Van Dyke's Restorers.
The double-return tying seen here is over-kill for this type of seat. Single strands are adequate. I did double for demonstrational purposes.
Good luck. "Buck"
Where can we buy those springs?
Väga hea õpetus aitäh. Sain oma küsimustele vastuse kuidas vedrusid siduda.Raamat ei asenda seda.Kohe näha on hoopis teine asi !
I just got a rocking chair with the springs and have the metal bars like the one in the video. It actually is a seat cushion that attaches to the chair. One of the metal bars is broken, can I get a replacement and do you sell them?
Can you send a photo to hipster73@hotmail.com? Are the springs framed with wire? A replacement is unlikely however I can probably reproduce what you need.
I emailed you pictures! Thanks
Do you have any links for that tool? I meant the first one - tack puller?
You can probably locate one by searching out any upholstery supply company. You want a "Berry Staple Lifter".
Where can I get the bars with springs attached and what are they called?
Good luck finding new strap springs. I've had them on back-order for weeks from two companies. Van Dyke's Restorer's has three lengths. I'm waiting on 17 1/2" at present... After six weeks I cancelled the other company for two sizes.
Thanks for posting. Where did you purchase the replacement parts?
I have put vinyl on. There seems to be some sort of vinyl trim that goes on last (where you put the tacks in). What is this called and where can I find it?
The trim is vinyl gimp I purchased 30+ years ago and is no longer available. You can cut and fold your seat vinyl, or in my video "how to make leather trimming" I show how to use binding to make a thinner and more manageable trim.
Brother you make me laugh. As an upholsterer I've seem some pretty wild amateur stuff. Old burlap sacks are not the worst. I know you've seen worse. LOL!
merci et bravo👏👏👍
Hi where can I get springs like these please???
Many people ask about strap springs. All of my sources have stopped selling them. I'm not sure where I can get them anymore.
Thank you so much
I want to do this to my Victorian couch but I don't know if this will work or if they make them for my Victorian couch ! Or if they can get put on my Victorian couch !? I have medallion Victorian couch!
If you're wondering about the strap springs, no, they probably are too short to fit a medallion back sofa.
Do you sell prepared kits?
I put together a materials list of everything a few years ago but the time/labor in counting nails, measuring and cutting burlap - muslin, weighing cotton, packaging and going to the post office, etc. doesn't balance out in the end. Labor exceeds retail profit margin.
Eu amei... ( I love it )
Where can you get springs like that
Van Dyke's Restorers
@@Buckminsterupholstery thank you so much I miss those types of springs
As many people that I send their way, they should provide them to me free...
@@Buckminsterupholstery iv been trying to find a video on learning how to make them and what grade wire they use
Pro work
Where do you get the row of springs from?
Van Dyke's Restorer's or DIY Upholstery Supply
How do you determine the hight of the springs.Thank you!
They pretty much establish their own height when pulled tight and the ties spaced evenly. (sorry for the delay. I've been away a few days)
thanks very very much. Your work is amazing
where can buy the grimping tool to attach the springs to the underside of the chair. PS. love your videos, so helpful.. 😊
If you're asking about the Klinch-it tool that "fastens" springs to jute webbing, I want nothing to do with them. The clips are dangerous and bloodshed is assured... I'm surprised they haven't been outlawed. Most sincerely, trust me... Practice hand-stitching the springs. (Thanks for tuning in)
The klinchets need to be outlawed. I would much rather tie the springs to the webbing before doing an 8 way tie. Old school.
were did you get the spring's?
Jason Parrott Van Dyke's Restorers
Why would you not just re-tie the old springs? We’re they not usable?
Those springs were marginal when they have been bent and leaning as long, prone to break, plus they tend to lose resilience and soften. Side note, the double-return tie is over-kill on this type of seat. I used it as added demonstration.
Good afternoon, really seeing your video I bought small furniture for two people, which carries springs, and the back part of the backing now I have to place the supplies dw, but it is very difficult to help me, please, I can send you Photos? that way he understands me better
Contact me via my website buckminsterupholstery.com
Thank you!
En el medio no se hacen nudos solo a los extremos y se colocan derechos los muelles porque sino cuando te sentáis es incomodo.
What are those spring sets called? Do they come in different sizes?
take2rollem Strap springs. Off hand I forget exact dimensions. 17 1/2", 19 1/2", nail hole to nail hole sizes. You can bend the ends in or out to adjust to your rail opening, sometimes needed with serpantined front rails. (thanks for watching)
Okay, thanks. I'm just starting out and I don't even know where to find those. I'm in Northern California. I've called a couple of suppliers out here and they don't know where to get them.
I'm doing a mission style rocker like the one you are doing in the video.
I found them in MO at Van Dyke's. I wish I could find them closer.
hello, Mr. Buckminster. I purchase the springs on the track. Can you tell me the best way to bend the ends? The very ends of the track extend passed the frame, so I need to bend them in a little on both ends.
take2rollem
Sorry, I didn't see these messages. Didn't know the link was here... You probably have the problem solved by now. Put the end against the workbench and push down hard. The strap should bend where it's folded at the base.
I can now finish 3 seats .....
Oh the 80s....when floral tapestry was put on everything. Poor mission chair. I reupholstered an 1886 Eastlake sofa and the liner fabric was a sugar sack. Of course I left it, but the 1960s yellow velvet daisy material had to go lol
Hii
Hello..
Hy
Pegggame
Why do upholsterers always want to replace all of the old innards when they're in good shape? I am not a fan of removing all the old material and replacing with new. Destroys the authenticity of the antique, in my opinion. Restoration, not replacement.
Alice, you are 100% off base with with your comment. There were no "inards" worth salvaging in this chair. Foam IS NOT authentic to this chair, and even at that, it was NOT in good shape. There was nothing original and worthy of restoration.