Dish Network New Connect Installation Step By Step Jan 2022 (Satellite Cable TV)
Вставка
- Опубліковано 6 жов 2024
- This is a new connect I finished up the other day. I go over the process on how to build the satellite, mount the Dish, how to run wire, what receivers I'm installing and so much more. I have a day in the life video on my channel so check that one out too!
That job made my back hurt... Stay healthy brother and lift with your knees!
Facts! The ladder and equipment be heavy asf! Def an in/out job 🏃🏾♂️💨
I'm a brand new dish tech it's been rough since I started during the ransomware attack but,.., Make More Videos they are really helpful
Same here I’m barely getting started on my sales
Yea I hate that dish makes you be a sales man and a tech.
I love this man I hope you do my video's I have been a tech for about 3 months still learning new things
Hey! Thanks man I appreciate it. New videos are already in the works. I'm definitely going to release some more videos in the near future. Stay safe out there.
@@dishtech4533 Do you work Directly for Dish Network what's it like
I am fixing to start training in a few weeks, any tips and/or tricks you have for me??
@@duallzz1560 are you on your own yet?
@@dishtech4533 make more videos
I have to admit over ten years in that job, my van never looked that immaculate. Nice touch with the red paint lol...
dish is horrible.
@@prowrestlingfan8042 at least its actually affordable.
Whos watching in 2024? 🎉
Me
Had a box back in the day that once you pushed AUX it unscrambled all the PPV channels... We need those back.
I used to work for DISH. You seem to know what your doing but I noticed something with your receiver process. A way to save time is when you get the dish up and hook up to the node or hubby, find the hopper line first. Hook it up, start downloading the hopper then come back to toning the rest of the lines, hook them up, then start unpacking all of the them. By the time your ready for Joeys, the hopper is done
That's good advise man. I used to do this but now we have these USB sticks with the software already on them so I just plug it in the hopper to power, then it starts downloading software from the USB, no coax needed. They save a ton of time.
I used to be a tech and before I left we also used the USB to download the hopper. It saves a lot of time when it works. For some reason the hopper duo didn't like to take the software all the time and would have to do a satellite download.
@@CptArnie Man, now a days the Hopper Duo's and Hopper 1's bootstrap about 70% of the time. It's like a recovery mode that takes about an extra hour to get out of. For the past 3 years the software downloads have been horrible.
@@dishtech4533 Hopper 1s need to be retired. The technology on them is highly outdated, and they operate poorly. I love Hopper Duos; despite the download issues, they have a short time installing. Recently I've had a problem with Hopper 3s failing check switches for no apparent reason. Always some problems with the downloads.
@@dishtech4533 hey I have a question do you know how to connect ur consoles to a dish tv pls it would help out
I wish I could have a dish network when I grow up
Bell TV in Canada uses Echostar/DISH Network equipment. I wish Bell would permit a 5 receiver setup like this.
You can have up to six receivers on one account. Been with Bell for nearly 24 years.
I realize that. I've been with Bell TV for 22 years and I install them. Using the Whole Home system (like this Hopper system shown in the video), at one time Bell was only allowing 4 receivers (2 x 9500's with one Joey (7500) connected to each. Now you can have 4 x 7500's connected to two 9500's for a true 6 PVR receiver setup. @@darrellbobyk6363
Outstanding, thank you. I’m glad I switched from DTV to Dish
Starting soon. Seems pretty technical. I'm nervous. 4 weeks seems short amount of time for training but I'll do my best & that's all I can do.
exactly how im feeling
How you holding up now? Still there?
How’s it going start tomorrow in dallas tx well grandprarie
Where you able to take your van home and training after your hired?
I used to work for Dish back in 2008, it was the most frustrating career choice i had ever taken on. At that time the HD orbital was just being rolled out and the orbital kept on falling out of alignment, we had tons of call backs for no HD. That sat buddy had a lousy battery life and would die after 20 minutes, the receivers took forever to update before the customer training could take place. Along with that, hours were spent setting up wild blue just so the customer could open there yahoo emails. That install looks like pie, no trees and plenty of old install points to update.
Yeah there's a lot of frustration with the Hoppers now a days. The software is the main one. Going from Dish Pro Plus to Dish Pro Hybrid makes it a cake walk. You only need 1 line from dish, and they replaced solo nodes with hybrid solo hubs, which act as a splitter for the hopper and Joey's. The only thing is the Hoppers are very sensitive to cable. The cable has to be 3ghz cable and all barrels have to be blue barrels for the system to be stable. That in itself requires the entire system to be looked over at every single job.
I sucked at the job and got fired 😄. But when I say suck I mostly did a good job I did have my moments.but my issue was speed.
We need more of these videos ! Where did ya go bud ?
I think he got fired or something
Do you caulk the lag bolts after fastening the mast to the roof to prevent moisture leaking past the bolts? It would be a great idea to do it.
Ohh!! makes me want to cry... I wish getting DISH was that easy in Costa Rica... Using 10 foot satellite dishes just to "capture" one satellite ... 72.7, 119, 129 ........
I had DISH Network Installed On 1/2/24
What is a good reading for a strong signal for this dish?? Does it have to be 100%?
Hey I’m a new tech and the only thing I want to suggest is getting a go pro just so we can actually see the assembly process
Man, I thought about this originally. It would really improve the videos, I just don't know how the customers would feel about it though lmao!
@@dishtech4533 oh yea didn’t even think of that well thanks for making these videos they have helped me in the field lookin forward to seeing more
Please don’t get the channel pulled lol 🤦🏻♂️🤣
@@joeypieklo6717 is it hard work I’m a mechanic and worked in different types of construction I think I will fit just fine start training tomorrow
i like that job!!!
I have an eastern arc HD pro dish I use camping on an anchored tripod. I'm using a 3 head LNB with a Walley just fine. Here's my issue: The biggest issue I have with my Dish reflector is, when setting the angle, there isn't a specific indicator for the angle. What do you go by? The center of the tightening bolt in the angle scale or ? The skew has a tiny little pointer to indicate what number it's pointing at. The dish angle adjustment doesn't seem to have a mark. What do you use?
Great video cable so much better then internet yet everything proven over 5 years I had internet always updated it over 2 years it continues to lock up and cable don't have that problem plus vhs tapes proven it doesn't stop playing at all yet my damage blu ray disc doesn't play at all yet everything proven some the older things are out doing the internet and damage blu ray disc yet everything proven vhs tapes don't stop playing at all yet everything proven it's the people who stops playing it everything proven that cable thing you are doing doesn't have loading problem's like internet does now days
My question is what does a messenger wire do?
Before doing Super Joey jobs I always try to convince the customer to upgrade to a Hopper 3. Much more reliable, futureproofed, and I don't have to deal with unnecessary BS.
Hi,
I have a technical question for you about my new satellite dual receiver.
My name is Jean-Pierre Desrochers, I live in Quebec City, Canada.
I have a single input Bell satellite receiver that I'm about
to replace for a Bell 9241 Dual receiver unit (same as Dish VIP722).
So far my wiring installation is the following:
Dual legacy LnB's (aimed at Nimiq-91° and Nimiq-82°),
both connected to one SW21 switch, then the output going
to my single input Bell receiver. Ok.
My question is:
If I place a Dish Network 123254 DPP Separator
at the end of my incoming COAX and use its 2 separate outputs
to feed the 2 receiver's input, will it work ?
Will I receive on both receivers ?
Thank You for your time.
I don’t miss dish installations.
Why they didn’t just take a Hopper 3? Give me the Western ARC any day for SD fallback. That 129 degree is a hard one though. I would have kept Dish had I could have afforded it, and Dish didn’t keep having contract disputes. I went OTA. DPH is awesome. I had a hybrid setup actually. 110 for SD the EA for HD.
It's mainly due to cost. Some people just don't want to spend the extra money. Thanks for the comment!
I seen you ground the dish to the ground block but if that's as far as you ground the system you just installed a lightning rod for that house.
Very interesting videos! I hope you keep making them! I just got dish in Houston and my second day I had to call a tech already because I got the infamous error code 535. Never picked up the signal. Tech said I’m getting 74db on 119
68db on 110
34db on 129???
What do you recommend? It works now but I’m afraid I will lose signal again…..
Thanks man! Your 129 signal is very low. That would fail a test. The fact you have strong signal on 119, then drops on 110, and really drops on 129 would probably indicate that either the mast the Dish sits on is not level, or the skew on the Dish is messed up. When signal is strong on 1 sat and low on the other, it means something is crooked. Signal should be as follows:
74 - 119
72- 110
54 - 129
@@dishtech4533 he's talking about dbs, not signal.
If your dbs are over 50, you need to replace the cable or lnb.
That's y it's important to use your inclinometer...that's how you hit the sat on the first shot ...
What brand/p# do you prefer on RG6, connectors(inside/outside), stripper and compression tool? Nice work and video.
Klein
Can you take the dish van to your training when hired?
If I have direct tv, can you use the sat dish mount from the direct tv dish to mount the DISH tv sat?? Good video. Thanks.
No. Direct and dish use different masts for some reason. I wish there were the same though. Would be a whole lot easier
Agreed@@livinglikelarry5008
I need more videos my guy
I'll be uploading some more videos in a couple days. Thanks for watching!
Great video! Hoping you can help as I take down my Dish and install an OAT antenna.
My Dish Satellite has two coax cables that connect to a dual connector that’s attached to the house wall. How do I determine which connection to attach the single coax cable that runs from the OAT antenna? Or do I need to rip out the existing dual connector and replace with a single one? Appreciate your advice.
Dish receivers only need 1 cable from a dish. The dual is usually for backup in case the main cable goes bad or to power a second receiver with tuners. Just pick a cable to use, either one will do the trick for an OTA Antenna.
Depends. If there’s two wires connected and you have vip you probably need them. If hopper system unscrew it with a 7/16 wrench and if you cable goes out you need that one. Then install you ota antenna facing. Tower and viola.!
Customer should have gotten a Dish Hopper 3 , 3 Joeys, & 1 Wi-Fi Joey
Couldn’t agree more, those Duo’s are piece of shit
You will increase your speed
Install your receivers 1st.
Work your self inside out
All your box’s will be done downloading by the time you finish the dish
✌🏻
I have been having an issue where my lower channels, under 62 will go out, but higher channels work fine. Would this be a dish alignment issue or an LNB problem? This is with a Hopper 3 with sling. Dual LNB at the dish and 1 joey. Looks like it uses satellites 61.5 and 72.
Im watching this video in particular because I have been a previous cable lineman back in the 1980's - 1990's until I injured my arm and couldn't hook poles anymore.
----
So I went back into 💈 Barbering.
NOW I have an issue with the state of Florida renewing my license
---
So I need to get another job and DISH 📡 is hiring and I am working through FLORIDA CAREER CENTER
----
ANY suggestions on my new choice for a change of professions????
Im wanting go get dish do i need to get my house drilled with wires?
Yes at least 1 to main box you can request wireless joeys for bedrooms
We have this it comes in the basement and hooked up to the hopper then on the first floor we have a Joey just the one. We want to know why we have UA-cam on the hopper but not on Joey and is there anyway to get it on the Joey?
Have you installed DISHLatino ?
You should make more videos
I am in Knoxville TN....please tell me if its hard to sell stuff to the customers.
Also, whats the average hours you work per week.? I have the job offer but i am a little concerned about selling. Can they fired me for low sales?
Thank you
You can get laid off if your sales are to low or if you work results are poor it goes both ways. The best way I’ve found to be successful in sales is to make professional recommendations for certain products that could benefit them throughout your walkthrough at the start of the job. We also have a sound system that really sells itself 50% of the time as long as you demo it every time. Put the effort in you will be successful in sales, don’t and it will show.
@@SuperSmokyV2 thank you for your rapid response. I sure will. Thank you
You have to really know who your selling too. A LOT of your customers will be in rural areas where there is no Best Buy or huge electronic store they can call to come mount their TV, or install a WiFi Mesh System. I hate selling products but I wouldn't say its hard. You'll like the job if your an outgoing person who loves a different day at work every single day. Hope I answered your question, thanks for the comment!
@@dishtech4533 This is the issue I'm both sketched out about, and not looking forward to. I got accepted after my interview today, and am looking for any reason not to think I'm making a terrible mistake. There's NO good feedback about this job on the internet.
I wish I could work as a tech!
Dish is hiring right now I'm not sure where you are located but if possibly in California apply bro you'll get a interview for sure & from there you'll see if you are interested or not. I applied Saturday & got a interview this Thursday. No experience no nothing they train you at their location. You may be flown to another city if necessary keep in mind but they pay for all expenses. Cool experience if you ask me.
Bro just go on indeed . They hire anybody as long as ou can sale apparently
@@ep3649 how it going I start training tomorrow here in dallas tx
@ep3649 how old do u have to be to get training there
Do you have to sell products? Are they’re strikes given if you don’t sell enough or come close ?
Yes we are supposed to suggestive sell our hdmi cords, our 10x2 surges, and soundbar/ surround sound setup on every job. But, from what I can tell, even if you were to sell an average of 1 surge a day your metrics should be good enough to at least keep your job. It depends what you sell. If you sell a full surround sound system you can go like a week or 2 without selling anything to keep your job. It's not that bad or hard. I just got done training and almost half my jobs I was able to sell something. Out of 2 to 3 jobs a day. I'm still slow. Some techs can do 5 or 6 jobs a day.
@@patfrerking very informative bro what area/ state are you in?
@@robbyg4737 at the Grain Valley station. It's by Kansas City, Missouri. In fact my first day alone is tomorrow. You get a month of training but I'm still pretty worried about how tomorrow will go. I wish I had another week of training on the field first. Do you work for Dish?
@@patfrerking yeah I’m on the first week of training my second day was today actually
@@robbyg4737 where you out of?
Is it possible w/ Dish to have a 4 room setup but in one room (basement) NOT see the recordings for the other 3 boxes?
For example right now we have mediacom & we have 2 dvrs (1 downstairs w/ no minis) & upstairs the other dvr shares its recordings w/ the other 2 minis up there.
Again I DO NOT want to see the recordings for the 3 other rooms, I only want to see the recordings on my dvr. The 3 rooms upstairs can share recordings.
Directv would NOT let me speak with a technician & can't give me a straight answer! I don't think its possible with their new genie 2 since it's one 2tb dvr that runs all the clients wirelessly (I've heard the Genie 2 sucks & freezes constantly). Wireless is not reliable that's why I run ethernet to my mediacom dvrs.
Still not sure if directtv will lease me 2 Genie 1 dvrs (HR54's) or if 1 Genie would allow me to have my own recordings seperate.
Using a hammer to locate a roof stud is a lot more accurate.
Wait. Did you install the dish. Before starting the update!?? 10:03 🏃🏾♂️💨
Yes he did
just out of curiosity why not just put a duo hub outside in place of the ground block?
he wouldve had to splice the cables that were in the attic connected to the direct splitter and bring them through that hole coming outside to go to the duohub. He went ahead and put it on a ground block to save time and to keep the equipment grounded.
I work for Comcast I do rg6 cable too
I hate comcast
I would prefer to get Dish over DirecTV
Do I need to have an HIC for my Joey or can I just plug the Ethernet into the back of the Joey? Does an HIC cost extra if I have the dish tech put one In during the install? Would you recommend using an HIC or wireless wifi?
I want to put a hopper duo in my living room, but I want to use that Ethernet port for my xBox. I have a free ethernet port in my bedroom where the Joey will be.
Neither. You connect your internet to the hopper only.
If your hopper is connected to internet and you connected your Joey via either net it would work. Moca travels via Ethernet as well
Man, Dish installation quality standards have certainly lowered since I worked there... I guess all that FSM's & the C-Suite care about now is how many soundbars you've sold. Does QUAS only show up when you're up for promotion now?
Also, the "ground" is useless the way you have it. The messenger wire needs to be shorter than the 12AWG you're using to do its job. SMGDFH.
Sorry, the messenger needs to be shorter than the 12AWG.
70 ea mucho respect, woulda definitely emptied there pockets in shs.
Fuck a download on a hopper system. New worst enemy is the hopper plus
I work in india ,daily having eight years of experience, can I get some work there in US
I have a question. If I setup a 1000.2 WA ODU, and want international channels, do I use another dish, with slightly different calibration or do I need a different dish altogether?
Defiantly ask your senior techs if they didn’t quit yet.
Dish tech here for eight years. To answer your question, you need a 500plus dish which has the 118.7 orbital in order to see the international channels.
@@Jose-xb6st thanks!
@@18Elitegamer ???
I got dish but good job dish!
devices dish network installation
what is a super joey
A larger version of the joey reciever. It's a dvr that connects to the hopper
More videos
Does zip code set hoe you set up dish for azimuth and elevation to get satellite signal from Eastern ark
Waiting on updates is sometimes a awkward process
Can I hook up 2 tv with one receiver??
Not with the newer Hopper system. With our older receivers (the VIP 722k) you were able to run 2 TV's off 1 receiver.
It is possible to mirror a Hopper with an HDMI switch and a very long hdmi cord but both tvs will watch the same show.
Sky Q is a lot easier😊👍
Come back pleasee!
So do you need a second dish for international channels?
Yes, there is a specific port on western arc lnbs for international channels. (From international dish to regular dish "int" port and out to receiver/switch)
Thanks
You need a 500+ dish that has the 118.7 orbital.
this way skilled work; too much for me
I want dish network
my brother in christ you are dish network
@Fernando17892 it's not the real channel
You're lucky a tool goblin didn't take that wrench
Hopper plus are a headache and damn i hate the dish softwares.
You messed up bro.. didn't follow the tech steps.. where is the demo.bag and sound bar set up.. there goes a write up.
Leave him alone
You must be a new tech lol
Leave him alone hes doing his best
I am worried about you
Dtv has a much better system….
Save your damn money streaming box
Why are people buying that junk just get a damn streaming box service
You think internet is everywhere??
@@joshkrause2977 it's trash kid go by an streaming box
@@samuelarriaza1283again do you think internet is everywhere? There are areas in the US that still rely on dial up. Not everyone can get the speeds needed for streaming.
@@joshkrause2977 Why would you want to waste your junk on satellite go by streaming services it's better lo
@@SCP_Gate-Guardian Thank you for that opinion but that an opinion no one asked no one cares I said what I said if you don't like it mine your own business
Young man , you need to move on to a different career. Satellite is a dying industry.
As long as old ppl are around and a cheaper option is available it will still be here
@@paulwilson8917 best of luck!
dish is the worse . horrible
Dish network's trash go buy streaming boxes go buy or dvd's it's better Or even go by physical stuff it's better than Satellite crap
Not everyone has the internet speed for streaming services.
@@SCP_Gate-Guardian Oh well sonic wel just go eat some chili dog
Dish a bunch of crap same shows over and over paying a lot of money for same movie
Incorrect.
When i worked at dish idgaf about "the next guy" im there to rig it up just enough to work and get gone!
yo do you have a instagram
Keep seeing you on dish videos. Did you start yet?
@@jermguy4626 Yes I’m about to hit my second month
@@Bryshere_Byrd are you still at dish? How are you guys taking it with this ransomware issue
In Florida, you can’t attach to the roofs.
FCC says they can be attached wherever they're needed.
@@SCP_Gate-Guardian No one cares what you think child