You all pay attention, this man is a master of his trade. I’ve been doing this work for over 40 years and would be honored to become his apprentice for a month, and guaranteed to learn a 100 new things!
@@CAVjoinery i retired from part time carpentry due to slipped disc. I had been doing carpentry for 30 years. I have watched your videos repeatedly, everyday. Enjoy every bit.... all the best to you. By the way, those chipboards are very heavy. be careful when lifting the modules. I used blockboards and laminates for my projects.
Great video I noticed that when you cut the chimney down on the cooker hood you used like tin snip device we used to cut them down with a jigsaw and metal jigsaw blade but now cut them with a grinder and the appropriate blade we hide the parts that get blued by the heat but too be honest it’s very minimal and on the plus side it cuts one side in about 10 seconds much quicker and easier and just as efficient
I noticed you screwed the bottom cupboard molding from the bottom and not into the moldings from inside the cupboard is that the best way the fix them. Great video's fella.
Hi CAV, incredible installation work! Just awesome! I spent 30 years in engineering, I see all your tools and know the brand. What brand of cabinetry are you installing? Thank you greatly for sharing the videos and info.
@@CAVjoinery Thank you and keep up the hard work. I just wished that you could have installed all my projects over the past 7 years on three big properties. Cheers and I’ll be watching!
😢мороз ТТГ ТТГ ТТГ ТТГ то тд БД БД ИТ ошолльором рож ид ми ми СИ чит сб сб сб сб сб..... Сб сб сб сб мб со со аш кеш кеш под титанического мят ИТ ИТ ИТ тттть
please what was the purpouse of marking the worktop 3times with the router on the scribe joint was that to position your worktop bolts ? and how come you cut the male section in one pass of the router ?
Hey there were 3 pasess but did not filmed all on both male and female joints ,from front 100 mid 300 and at the back 480 to be able to tighten the back as well as the cabinet back panel is in the way thanks
I don’t know if you’d be interested, but you should post some tip videos. I learn a lot from your vids but fast forward is too hard to watch sometimes haha
You all pay attention, this man is a master of his trade. I’ve been doing this work for over 40 years and would be honored to become his apprentice for a month, and guaranteed to learn a 100 new things!
Hey DAVE thanks a lot for your kind words means a lot to me coming from you as an experienced professional thanks so much !
Only speak the truth my friend, keep up the good work and the good Lord will reward you for it!
Totally agree. Another great video 👍🏽
Είσαι φοβερός τεχνίτης τοποθέτηση.Κάθε φορά χαίρομαι πού Σέ βλέπω νά εργάζεσαι.Είμαι συνάδελφος σου στή Ρόδο νησί τής Ελλάδας
Thanks sir for watching my work really appreciate it
You look like Ryan Giggs, ex Manchester United midfielder. Enjoy your videos. Great work.
You think so?🤣🤣I just looked on internet and I don’t think so 😅
@@CAVjoinery i retired from part time carpentry due to slipped disc. I had been doing carpentry for 30 years. I have watched your videos repeatedly, everyday. Enjoy every bit.... all the best to you. By the way, those chipboards are very heavy. be careful when lifting the modules. I used blockboards and laminates for my projects.
I am really enjoying watching your videos. Great work!
Thanks so so much !
Great video I noticed that when you cut the chimney down on the cooker hood you used like tin snip device we used to cut them down with a jigsaw and metal jigsaw blade but now cut them with a grinder and the appropriate blade we hide the parts that get blued by the heat but too be honest it’s very minimal and on the plus side it cuts one side in about 10 seconds much quicker and easier and just as efficient
I know but im so scared to use a grinder as my brother has gotten by the flying blade and jig saw is too rough and flammable thanks for your thoughts
عمل رائع واصل المزيد من النجاح والتألق ❤
I will thanks so much for watching thsi !
I noticed you screwed the bottom cupboard molding from the bottom and not into the moldings from inside the cupboard is that the best way the fix them. Great video's fella.
Yeah when possible i do so no screws being seen,thanks
Nice work sir thank you
Most welcome
Hi CAV, incredible installation work! Just awesome! I spent 30 years in engineering, I see all your tools and know the brand. What brand of cabinetry are you installing? Thank you greatly for sharing the videos and info.
Thank you home design hq kitchens
@@CAVjoinery Thank you and keep up the hard work. I just wished that you could have installed all my projects over the past 7 years on three big properties. Cheers and I’ll be watching!
Excelente trabajo 👍
De que material es la mesada? Y cual es su espesor?
Thank you for watching, worktop is laminated chipboard 38mm thick
Lovely job. What is that little festool table that you put your circular saw into called? I’ve never seen that before.
Scs
55 table saw
Great fitter , what’s the sealant you use for the joints on worktops and cutouts , do you colour code for different worktops , cheers
Thanks .i use egger sealant adhesive it came with the worktop
Excellent work. I love watching your work, exceptional fitting. What is the tool you use at 4:33 for 'shooting' screws into the wall please?
It’s called rawl tool here ins my amazon link www.amazon.co.uk/shop/cavjoinery
@@CAVjoinery thank you
😢мороз ТТГ ТТГ ТТГ ТТГ то тд БД БД ИТ ошолльором рож ид ми ми СИ чит сб сб сб сб сб..... Сб сб сб сб мб со со аш кеш кеш под титанического мят ИТ ИТ ИТ тттть
Hi great job , what is the joint in compound on your worktops.
Hi on the jig 135
Thanks for watching
👌👌🔥🔥🔥🔥
Thanks 🙏
please what was the purpouse of marking the worktop 3times with the router on the scribe joint was that to position your worktop bolts ? and how come you cut the male section in one pass of the router ?
Hey there were 3 pasess but did not filmed all on both male and female joints ,from front 100 mid 300 and at the back 480 to be able to tighten the back as well as the cabinet back panel is in the way thanks
What fixings did you use for drywall?
Hey I use RAWL setting tool and anchors
Hi what material are you using for the countertop?, it looks like plywood, but like plastic, but like marble, please where I can get that?
It laminated chipboard and splash backsplash are compressed laminate MDF thanks for watching
Hi is the dust extraction good on this router? Been looking at getting it for a while as my makita one throws dust everywhere
It is although has to do with using empty dust bags and the technique of routing Thanks
I don’t know if you’d be interested, but you should post some tip videos. I learn a lot from your vids but fast forward is too hard to watch sometimes haha
Sorry they are shorts video and they have to be under 1 min and i am so glad to hear that you like my content. Thanks for sharing
Do you not fix the units to the wall
They are
Bonjour peut tu nous faire une vidéo sur tout ton matériel merci
English please thank you 🙏
Hi. Have a older model of wall detector, totally crap. Newer model any good? Thanks
I have used it for 4 years and im happy with it
What make is it please
@@TheSicosi have a look here 👉amzn.to/3QJio1h
What is that glue and spray?
Here is amazon link it is actually CA glue and accelerator amzn.to/3S8HW8a
@@CAVjoinery thanks a lot.
Small, green appliance.What is it?
Is called margin marker you can hav alook on my amazon link www.amazon.co.uk/shop/cavjoinery
Вы используете жидкость-спрей при склеивании листового материала. Что за спрей?
hello can you make us a video on all your equipment and its features thank you
I rather don’t as people will think I’m showing off and get a lot of hate but I consider it after doing o bit of research thank you