1983 chevy c10 stepside supercharged walkaround
Вставка
- Опубліковано 20 кві 2015
- Walkaround chevrolet c10 stepside supercharged 355 with speed and performance multiport and p600b.
wheels and tires are cragar super spojes 15x8 and 15x10 powderciated black with 265 front and 295 rear rubber. Nothing special. - Авто та транспорт
Hearing that Rumbling V8 start up get's me every time, great job on that build.
That gauge cluster looks so good. I mean the whole truck does
Very Clean! I have an 86 project right now. I think these trucks are going to soon become as popular as the 67-72. Little by little all of the 81-87s are rusting out so they are starting to get hard to come by a clean one.
Truck looks awesome. I always wanted a truck with those lines
Now that's a damn clean step side. Great job bud 👍🏼
I have c10 80 stepside did alot of work to it, shit makes me jelly looking a this one, but damn times are hard right now. kicks rocks
least you still have yours...kicking myself.
Should upload a video of it
My god, that must be the best sounding V8 of the planet.
The sounds its just... god.
The Chevy of my dreams😍😍
Nice strong motor beautiful truck man
I like that.....nice to see something different than an LS or a big block in one of these things.....even though I'm building a '73 short bed fleet side in my garage and of course I already have a LS swapped in it.....but if I had a procharger and an old iroc/corvette motor lying around I'd probably use that instead
I had a stepside once in my life i miss it
Wheel and tire setup is perfect
OKay all you car guys, This is how you begin a hot rod video. Just start it up and don't say a word. Nice chevy!!!
Nice old school setup!!!
Perfect exhaust note. Especially from there it dumps
A chevy c 10 is my dream car when I get older !
g.1.8.17 good luck there only getting harder to find
g i 817
got one for you then.
slick body
one rocker has some rust
350 40 over solid lift 292 cam 10.11 comp.
turbo exhaust
buckshot rear mudders w/tow package.
6500. cash tn.
text 9014748727 for pics and chat.
me 2 an I'm 24 lol
j Cardenas same working on a 69 c10 currently
They’re not hard to find and you can find them for 1500-3000$
Sounds BADAZZ
LOOKS GREAT ALSO
NICE BUILD
That is clean the wheels are a perfect match
Sick truck man
Hey 598! How are you? Great truck. Thanks for posting. When I return to the United States I plan on posting a video of my truck. Anyways, what do you got working for the suspension system? Can you provide some details perhaps? Thanks in advance for your consideration.
Chevi C 10 stepside very beatifull the escence and one truck pure v8 supercharguer best sound yeeesss😍😍😍👌
That truck is amazing! I can't stand it when people take trucks like these and put those stupid huge rims and extremely low profile tires on them.
Chris it’s who ever own the truck deciding what wheels to put on , they don’t need your approval buddy
I agree the donk rims look like shit and I think the people who put them on are low class
You Tube L
It’s your truck but I am not feeling the tires in my opinion
whats your drop?
Thats the best sounding truck ever
Thank you 😊
What roll pan did you use for the back?
Kenneth Basham built it myself
Sweet ..💥. Wichita ks 9/17/22
what do you have for exhaust? it sounds like a symphony at idle but a metal concert under a load. the exhaust is shot on my 83' and i'm hoping to replicate (or at least get as close as i can) that sound.
jgoneida I built it myself. it's a 2.75 into 3 inch into 2 dynomax race bullets exiting.in 4 inch sections under the steps. has vortex cone inserts to help get rid of high pitch notes
good to know, awesome truck. thanks for the reply.
598Corvette where did you put the cones?
+theycallmerebel in the collectors
Nice truck bro 👍
‘Nothin special’
hehe I like this guy.
Awesome video brotha.
greattttt .... nice truck ... cheers ....
is hard to install a electronic engine in old truck ??? . cheers ..
Hey Bud! What vehicle did those seats and console cone from? Did you do any modifications to fit those tires? Size?
Custom truck of texas fold bench custom upholstered. Yes fenders are bulged out in the rear
SWEET SUPERCHARGED RIDE BY PROCHARGER, @CRAIGCULL SHOW US YOUR SWEET RIDE
Algún día tendré una así❤️😍
👀👀
omg i am in love
Just love it fxxking awesome!!!
hi I was wondering your rear stance it's not on the comments or description could you let me know how many leafspring you took off or left on your c10
I have 6 leafs if I remember correctly.
Can you tell me what kind of engine you have here and what is the all details inside the hood.. the sound returns me 17 years ago same like drivers 1 ps1 I like it .. you make best project I ever seen 👌🏻
What where did you get the split bench seat? the interior looks great and wanting to do something similar to mine
Custom made out of an old custom trucks of texas brand bench
What is that box on the firewall with the red plugs that's on top of the heater core cover???
Weatherpack ecu, late c4 corvette
I love that exhaust sound what mufflers are those
That's bad ass. How much power you making ?
Gorgeous
Any pics of intake? I have the s&p bbc ramjet set up but no instructions or pics of completed set. Could u tell me if there are any other brkts besides throttle brkt, and what throttle cable works?
Theres just a throttle cable/tv cable bracket. I used a lokar tpi cable
@@Maxcoperformance ok I have the S&P tall ramport injection intake for a bbc, using term X controller, 58cc Tb, and I need rails made, these have to many extra holes. I have no details or info from set up but I hope it's as straightforward as it looks.
The rails are specific to the manifold although holley stealth ram ones can be made to work
Beautiful
What ride height is that? I own a 90 step side so it won’t be exactly the same but I’m looking for something similar
Its drop spindles drop springs and a flip kit plus hangers. No idea. Been what... 15 years ago
What drop spindles are you using in front. How much is it lowered in front.
Belltech and cut springs so more than the drop spindles alone
VERY nice... ;)
im in love :o
The first truck I like we always use red cooler imeen the original is mixed red & orang
First time I see black really great
Subscribed! Truck sounds great! I have an 86 with a 383.
Where did you get those seats from I like them wouldn't mind finding some for my c10. Dose the center fold up and make it into a 3 seater?
custom made covers on a normal folding bench seat
+598Corvette the part I really liked was the center conceal with the 80's style cup holders
+Ivan Ferro it was a custom truck of texas bench. I painted the wood a deep gliss piano black and the seats were done in leather.
That looks like something I'd do in GTA
BADASS !!!!
What’s the drop and wheel setup?
Can you help me with back wheel offset ?
🙏
Because I have C10 Stepside and I looking for perfect offset
What rear pan is that I would love it on my truck
+Orlando Zizumbo I fabbed ut myself
where did you get that rear roll pan?
peter cecere made it from scratch
Saved~
To my favorite porn to watch before I sleep
Whats that knob for tho!!
i was wondering what's you ride stance front and rear
Erik _77 no idea 4 inch drop or thereabout. rear wont go lower. may lower frontva tad more but I already cracked the front spoiler
598Corvette alright thanks
What's the fitment on the wheels and suspension? It looks gnarly
8x15 10x15 4" bs
Did you take the hood safety catch off for where that intercooler sits? Or does it clear?
Good eye, yeah the catch was removed, really need to install some safety latches
@@Maxcoperformance I've got the same issue that's the whole reason i found your video lol I think if you move it down even an inch it'll be close... nice looking truck btw thanks for some inspiration!
Move the intercooler down*
Can't move it down. No room lol. I might rig up a cable with a release hook
Did c10 come with stepside back then or is it a bed off an older truck?
+Russel Mcfarland no came like that. The truck was all original when I got it.
Is having your fuel pump in your engine bay right next to the headers safe?
theres quite a bit of room between the headers and pump and it uses all quality hardware so no leaks.
a mechanical fuel pump sits a lot closer to the headers
where’d you get that roll pan bumper at?? is it custom ?
Yes fabbed it myself
MADE IN USA ! .... I don't think any Japan car would happy to meet this monster in a red light...just the sound its f... crazy and brutal pure power
actually made in the Netherlands :-)
I just been there in Amsterdam & Rotterdam...grettings from john in Denmark Sweden Spaine
What stance is this one, or is it factory stance?
I’ve had my white ‘86 Silverado C/10 for 22 years now..👍🏼👍🏼
No dropped front and rear with spindles cut springs and a flip kit
598Corvette
Thanks bud, good looking and sounding one you’ve got there..
That's a one off made roll pan right? Where did you get them lights? killer truck!
Talon Vaughn yes. The lights are cut from old flat rear lenses with a billet bezel over them. Buckets etc are custom and part of the pan0
hey, what are the specifics for the rims and tires?
+Ron Farver never mind
Hot damn!
what brand, size, rims and tires are those?
+SIXTY8FAST Let me know if you find out the rim and tire size please
cragar super spoke 15x8 and 15x10 powdercoated black. 265 front 295 rear
Did you run an external pump? I believe I seen it on fender with filters, I'm installing s&p ramport with terminator x controller, could u give me a list of parts that bolt to intake? I only have rear dizzy cover, throttle brkt on drivers side and rails with suppressor and regulator. Any help is much appreciated, I hope I can fit it all in my aerocoupe
Yes it's a holley pump and filter. It runs off the surge tank in the front. The surge tank is fed by the low pressure dual tank system and a mech pump. I did this to retain the stock lo press switching valve. The rest of the ramport accepts all tuned port stuff. Just like any sbc type fi setup. The base is similar to the holley stealth ram. The harness is custom made. It runs off an 92 vette weatherpack ecu
@@Maxcoperformance ok nice I have gm harness but was missing end to dizzy and other electronics, holley sent me a harness and I'm running a aluminum sumped cell, so I think I need a pusher pump. I hope to turn key by nov...
@@Maxcoperformance i see most use a lokar tpi throttle cable and I need a old vette yard lol thanks for your help.. I'm 1" past hood clearance, smh i dont want a cowl
Yes run a pump off the sump. All efi pumps are pushers they dont pull very well.
@@Maxcoperformance any preference on pumps? My 1st efi swap for myself and everyone shouts holley or walboro.. aeromotive has good n bad as well..
The definition of 'bad ass' seen here folks.
What front grill is that man absolutely love it!?
The stock 83 one painted to match the exterior color. It's a quad headlight with hidden park/indicators option
Is that the original engine what addition you do to it to make it a super charge I got a 1976 c10 350 engine want to do some stuff to it
@@georgefrancis3767 no it's a purpose built 355 with alu heads, blower cam etc
One of the baddest stepsides I’ve ever seen goddamn
Ty
Nice truck I bet it get up and goooo L98 block tpi
Badass!
Sweet
Fiya😍
A beast Build , what is the suspension kit ? because this what Im hoping to build exactly but with ls3 367/525 engine .
+Suhail Alameri drop spindles and cut springs front. Flip kit and hangers rear. Drop shocks all round and modified bumpstops
An ls3 would be sweet. They are expensive here and hard to get your hands on.
+598Corvette Nice chep set ,better than a whole new system , Im saving half what I make for the project ,thanks .
Do you have a part # for the intake, i've google what you have listed but cant find anything...looks like a solution to my tuneport bottle neck
Try calling speed and performance hotrodlane. They might have closed shop
@@Maxcoperformance Appreciate the response, from what I gathered Mark, they guy who ran it passed away and they closed shop. Have a good one
@@hankbardukis381 check out thirdgen.org. tuned performance is selling one now.
what kind of taillight are those?
I made them myself. they are cut lenses from a set of large taillights with a billet piece of aluminum with slots over them. the lamp buckets are part if the rollpan
well nice build
beautiful truck man, what size tires and drop?
see other replies
+598Corvette Sorry, I didn't realize it was in the description. Will you be uploading any videos of the truck racing at the track?
+John Moose no because there are no tracks here unfortunately. thats why its built for speed and stability not quarter miles
What exhaust you running
Custom built by me
👌🏾🔥🔥
Bad ass truck man! What cam & exhaust you got. Sounds wicked!
it's got a comp blower cam and the exhaust is home built. headers into 2.75 duals stepped to 3 inch bullets and 4 inch ends
+598Corvette awesome man! Badass truck bro! 👌🏼
ROFL ...i keep wanting to ask are those 15x8 or 15x10 rims yet just keep hitting replay!!! =D ...have an old Southern Comfort 94 GMC and your truck makes me smile!!!
15x8
Brilliant
Can anyone show the wiring under the steering wheel!?
It's good for the compressor to breathe warm air?
Its not that hot there. Headers are wrapped and engine bay has plenty cool air. Between this and a very clumsy cold air setup discharge temps differed a mere 15 or so degrees . The large fmic more than handles it ty
@@Maxcoperformance ou thanks 🤘🏻
Can you please let me know how much you spent on your preference parts/labor .
Sammy Murkyou I have no idea. I din't keep records. Most stuff was lying around in the shop and I do everything myself so no labor costs
598Corvette clean ass fuck bro get goosebumps from your truck. Ima set mines up like yours
+Sammy Murkyou thanks 😊
I was gonna make my c10 a short bed but every time I envisioned it...it seemed to make it look weird. So im just gonna stick with long bed.
Plus sick truck btw
What drop kit did you use?
belltech spindles and flip kit w hangers
+598Corvette is this truck for sale I would like to buy it
How much up and torque is it pushing
No idea never went to a dyno
How did you get the exhaust to come out the sides like that
I simply ran the pipes out behind the fuel tanks
@@Maxcoperformance did you buy a kit for that?
No I build my own stainless exhaust systems, check out maxcoperformance on instagram
@@justinbruggeman8097 are you in the netherlands? Cuz of your dutch surname
what kind of wheels are those and what size tires?
Cragar super spoke powdercoated black. 245 50 15 and 295 50 15 tires
they just look phenomenal!!! great looking car
wow
i like seats wish you talked about what they are
Sansui Mcpeters its a custom truck of texas brand folding bench that I custom upholstered. I had the stitching pattern custom made.