You should flash DME to manual version, but it will drive also with original one. You should also code comfort unit to remove auto gearbox from dashboards.
I want to know more about coding to remove AT module on. Ecu and remove the bear icon on the daskboard to make real MT. I already done swap MT to N42 engine on my e46 318. Please show me your coding! Hope you help. Thank you very much!
hello I want to start transforming my 330d e46 into a manual gearbox as you could provide me with a wiring diagram because on the video we do not see much
Have watched all of your videos but not a single one showed how to do the wiring…. maybe would be smart to show the only thing thats not obvious to people looking to do the same swap
Nazdar, tak už aj ja to mám za sebou na mojej E46 330xd, keďže mám 19 rokov a som začínajúci mechanik tak som mal z toho kúsok strach, ale keď už som začal zháňať diely a začal šrúbovať prvé skrutky mal som z toho dobrý pocit, a podarilo sa :) s kódovanim nebol problém (akurát ešte budem musieť zohnať mapu na 330xd kvôli škubaniu), čo ma zaskočilo pri prestavbe je že pri modeloch s Xdrivom je karoséria kúsoček iná pre manuál a pre automat, konkrétne karosérie s automatom nemajú držiak pre silentblok na páke, tak ale kúsoček študovania katalógov BMW mi pomohlo nájsť číslo toho dielu, pôvodne som plánoval vyrezávať tento držiak z iného auta, ale zistil som že držiak je dostupný za pár drobných ako nový. Hodím tu ešte pár vecí ak by niekto prerábal Xdrive, ja som mal 135kw verziu takže niesom si istý či to bude aj pri 150kw verzii rovnaké. Kardany som nepotreboval meniť keďže manuálna prevodovka je umelo predĺžená aby bola na dĺžku rovnaká ako automatická. Takisto nieje potrebné meniť rozvodovku, tá sedí, ja som ju každopádne menil zo 150kw modelu keďže moja to už mala za sebou. Skrutky na prevodovke sú takisto identické teda není treba doobjednávať nič iné (ja som objednával a teraz mi ležia na poličke 3 skrutky za 12€ :D ) Diferenciály není potrebné meniť ale odporúčam keďže 3100rpm pri 130tke není práve príjemné jak pre ucho tak aj pre peňaženku :) A čo by som ešte dodal tak ďakujem Jášo za dodanie kuráže ktorú som potreboval na túto prestavbu :) a prajem veľa šťastia tým ktorý sa o ňu v budúcnu pokúsia.
Hello my friend I did the conversation on 330d 204hp rwd i really need from you to answer me!!! The vibration which you have its stop when you replace the ECU or the soft of your ecu or no Sorry for my bad language Greetings from BG!!!
@@danny_7719 Hi, you did conversion from automatic transmission to manual ? I had vibrations when I softly touched pedal and when I softed ECU those vibrations stoppped. Also I didnt change acceleration pedal and when I pressed kickdown engine freaked out and threw limp mode so I suggest to change even pedal if you haven't done so. Hope it helps you, if you need anything else feel free to ask :)
So when u changed the tranny on the 330xd u had no problems with it being 4x4? Im thinking of doing that becuase the auto cannot hold even a slight boost in power i think and did u remove the x drive system and leave it rwd?
@@serdarian Well the best would be the one that belongs there so for M57 5speed xdrive 2.35, for RWD 2.81 if I remember correctly, otherwise it will mess up your cruise control for 6 speed you need to search on internet
@@WeAreCarFans yes i done this and no longer have prking sensors .. my car is a 2005 facelift and not to sure that makes a difference ..i have reverse lights but still have relay pugged in
Should not be diference, if parking sensors was always there and you did not replaced GM5 module. Try to measure if there is any electricity in parking sensors when you go to reverse or if gong is working.
Automatic cars are disgusting to drive......there is less feel of driving...yah I speed is good but nothing more than that ......... Manual is best to me 😘❤️
WRCF utocia na zahranicnu car scenu 😃
tam su prachy..... :D aj tvrdy bob spomynal kolko zarobil na tej zhorenej oktavke,ked sato dostalo na zahranicne videnia...
Mám strašne rád autá síce mám len 10 rokov ale autá má strašne bavia a dúfam že vydáte video aj v sobotu 🙂
Veľký palec hore za odvahu a výsledok!!!
Video v stredu ? Nezvyk 😂😂😂
Jste kluci šikovní no :) Já vím kde se dolívá voda do ostřikovačů max :D
The last part of the video is why we all want to manual swap haha 😂
This is bad ass. I wish you were in the states so I could get it done on my 335D
Super video zkouknul jsem ho za minutu.
Ja som zvedavý kedy jeden z nich si zase kúpi nejaké super auto
you have to set it manually from the computer
that I put the box in 5 but my check is burning because it is automatic
What is better
Manual, but auto is also good in this one
Hello, after I change the automatic gearbox to a manual one, do I have to do the prosifca?
I swap into manual E46 325i,but the throld gaz accelaretion IS not working
To jste inačí borci, hosi :D .. Dost dobra (a rychla) prace
A urobit to opacne je ako narocne ? napr e90 z manualu na automat ?
Výrazně více. Musi se natáhla co vyměnit elektrika k automatu.
Hi is something to code ine DME when swap to manual gearbox? Only wiring modification?
You should flash DME to manual version, but it will drive also with original one. You should also code comfort unit to remove auto gearbox from dashboards.
a prečo bolo treba dať preč mačky ? :D
Mačky?
@@WeAreCarFans 1:35 "Cats removal ..." xD
asi by znelo líp "Catalytic converter" no 😄😄
How many days did it take to do this conversation
Did u check the auto trans what was broken in it? I have the same broblem now and have thinked if its only turbine or full trans broken....?
I did not but I was told it full broken as it is typical for this GM trans.
Where are you guys from?
I want to know more about coding to remove AT module on. Ecu and remove the bear icon on the daskboard to make real MT. I already done swap MT to N42 engine on my e46 318. Please show me your coding! Hope you help. Thank you very much!
Hello Vo, check 50skid video on coding. I did what he did ua-cam.com/video/FiBr1h9j0bU/v-deo.html
How do you make the cruise control work after such a swap?
I had to reflash ecu to manual version (may not be necessary), swaped diff to correct ratio and conneced clutch sensor correctly.
Hydroměnič v háji? Na mojí první E46 taky odešel.
Pięknie! What is the approximate price of such conversion in Czechia? I have it on my mind since a while. And I live close to the border :D
Hey! I’ll do the same swap. Could you send me a link where I can find the wiring with the clutch and brake switch? Thanks!
I found it at junkyard, I do think you can buy a new one...
hello I want to start transforming my 330d e46 into a manual gearbox as you could provide me with a wiring diagram because on the video we do not see much
You can check rest of the series in our playlist. Diagrams are there.
Have watched all of your videos but not a single one showed how to do the wiring…. maybe would be smart to show the only thing thats not obvious to people looking to do the same swap
You can check 50s kid on UA-cam or diagrams here www.newtis.info/tisv2/a/en/
How much it cost to do that
Depends on many things, if you can do do work or not, country etc. For me, it was around 1000 euro
Nazdar, tak už aj ja to mám za sebou na mojej E46 330xd, keďže mám 19 rokov a som začínajúci mechanik tak som mal z toho kúsok strach, ale keď už som začal zháňať diely a začal šrúbovať prvé skrutky mal som z toho dobrý pocit, a podarilo sa :) s kódovanim nebol problém (akurát ešte budem musieť zohnať mapu na 330xd kvôli škubaniu), čo ma zaskočilo pri prestavbe je že pri modeloch s Xdrivom je karoséria kúsoček iná pre manuál a pre automat, konkrétne karosérie s automatom nemajú držiak pre silentblok na páke, tak ale kúsoček študovania katalógov BMW mi pomohlo nájsť číslo toho dielu, pôvodne som plánoval vyrezávať tento držiak z iného auta, ale zistil som že držiak je dostupný za pár drobných ako nový.
Hodím tu ešte pár vecí ak by niekto prerábal Xdrive, ja som mal 135kw verziu takže niesom si istý či to bude aj pri 150kw verzii rovnaké.
Kardany som nepotreboval meniť keďže manuálna prevodovka je umelo predĺžená aby bola na dĺžku rovnaká ako automatická.
Takisto nieje potrebné meniť rozvodovku, tá sedí, ja som ju každopádne menil zo 150kw modelu keďže moja to už mala za sebou.
Skrutky na prevodovke sú takisto identické teda není treba doobjednávať nič iné (ja som objednával a teraz mi ležia na poličke 3 skrutky za 12€ :D )
Diferenciály není potrebné meniť ale odporúčam keďže 3100rpm pri 130tke není práve príjemné jak pre ucho tak aj pre peňaženku :)
A čo by som ešte dodal tak ďakujem Jášo za dodanie kuráže ktorú som potreboval na túto prestavbu :) a prajem veľa šťastia tým ktorý sa o ňu v budúcnu pokúsia.
Hello my friend I did the conversation on 330d 204hp rwd i really need from you to answer me!!!
The vibration which you have its stop when you replace the ECU or the soft of your ecu or no
Sorry for my bad language
Greetings from BG!!!
@@danny_7719 Hi, you did conversion from automatic transmission to manual ? I had vibrations when I softly touched pedal and when I softed ECU those vibrations stoppped. Also I didnt change acceleration pedal and when I pressed kickdown engine freaked out and threw limp mode so I suggest to change even pedal if you haven't done so. Hope it helps you, if you need anything else feel free to ask :)
So when u changed the tranny on the 330xd u had no problems with it being 4x4? Im thinking of doing that becuase the auto cannot hold even a slight boost in power i think and did u remove the x drive system and leave it rwd?
@@Majky684 Which differential do you recommend?
@@serdarian Well the best would be the one that belongs there so for M57 5speed xdrive 2.35, for RWD 2.81 if I remember correctly, otherwise it will mess up your cruise control for 6 speed you need to search on internet
What program do you use for writing ecu?
NCS Expert for comfort ecu and Galleto 1260 for engine ecu
Jak ošetřujete elektrické pájené spoje? :D
Smrstovsci buzirkou.
that definitely only took 8 minutes XD
hey guys
did you get your parking sensors to work ?
Yes, you must conect cables from transmission to reverse relay in engine bay.
@@WeAreCarFans yes i done this and no longer have prking sensors .. my car is a 2005 facelift and not to sure that makes a difference ..i have reverse lights but still have relay pugged in
My relay is still connected aa you can see at the emd of the video. Does your reverse light working? Do you have gong connected?
@@WeAreCarFans yes have reverse light and gong is connected
It's a 2005 e46 face-lift
Should not be diference, if parking sensors was always there and you did not replaced GM5 module. Try to measure if there is any electricity in parking sensors when you go to reverse or if gong is working.
ahoj proč se to muselo předělat? Byla rozbitá? A nedala se sehnat jiná?
Tyhle GM jsou problémové. U použité ti nikdo nezjistí stav a repase je dost drahá.
Raději točte zajímavější videa.. Nějak to tu upadá :-D
Co uz je sobota 😃
3 Pedals vor Live !
Ahoj, prosím ťa, tie dva káble so spínaču spiatočky z prevodovky je jedno jak zapojíš do toho konektoru namiesto relé?
Ano je to jedno.
Škoda té hudby, jinak 👍🏼
Coding.. 😁
Wtf
Tož kde žiju...???nic Anglicky nečtu tak zdarec...
Tak jsi zaostalec no...
@@XxTrustNoOnexX proc by byl zaostalec? Vsak ma pravdu,jsme v Česku.
Důvod proč je popis v aj.? Kvůli lovu zahraničních shlédnutí?🤔
Vsak to video je aj v češtine tak čo places kks.. co je zle na tom ze to hodia aj pre zahranicnych tvl..sedlac
Automatic cars are disgusting to drive......there is less feel of driving...yah I speed is good but nothing more than that ......... Manual is best to me 😘❤️