How to grip a Steve Caballero skateboard and cut out the top image
Вставка
- Опубліковано 6 вер 2024
- Setup an old school 80s skateboard part1 -
How to grip a Steve Caballero skateboard and cut out the top image
This is the first part on how to set up an old skool (school) 80s skateboard.
Watch part 2 here:
Setup an old skool 80s skateboard part2
• Complete setup an old ...
1 x powell peralta steve caballero deck.
2 x Gull wing trucks.
4 x Santa Cruz Slime Balls Maggots
8 x Bones Reds
2 x Bones Rails
1 x Bones Tail Saver
Special Thanks to my mate Rob for buying me the board for my birthday and www.conflictska... for selling me the rest of the setup :)
disclaimer: I am not responsible for anything that goes wrong while cutting out your grip tape. I am also not responsible for any injuries that you might get from cutting out your grip tape. Take care :)
******************************************
Hi I don’t normally do this but just a heads up for anyone in to bitcoin . You can earn free bitcoin but downloading and trying apps using this app : featu.re/H6NYPG . **********************************************************************
Earn Bitcoin while browsing the web. by using the CryptoTab Browser. It really works. Get it here: get.cryptobrow...
Super old school 80's style would be to simply cut the grip in two pieces both stopping at the logo..either straight cuts or you can cut a curve so it hugs around the logo somewhat. Whatever naked deck showing we would slap little puzzle pieces around the sides of the logo..or just leave it bare.
This came out solid. Looks good.
The filling killed me
It was brutal
Big Oof.
Everybody's sleeping, I'm trying to piss quietly and all of a sudden RASP RASP RASP!!!
I'm going to also be building a retro Powell board. I didn't even think about cutting out the logo but this is a great idea and I will do the same.
Evil DSM another person suggested drilling the holes for rails etc before gripping . Also you might want be more careful than me filing of the edges or use a knife ;)
@@rickyspires7787 I always score the edges and then use a razor.
I gripped one of these for myself yesterday, I just used clear MOB grip 🤷♂️ silver colorway looks dope through the clear, can also see the board for a night skate haha.
the patience this guy has...
Great job with the cutout logo but You also killed me with the file scratching the paint. Years ago I did them differently I would trace the outline of the board cut it then take a compass set it at 3/16 make another line inside of the first cut. then use dish soap and water same as putting on Vinyl graphics this way you never scratch the paint you can move the tape around as much as you want roll any bubbles out with a roller no sence telling you how I made one back then when they sell them now. I used a good pair of industrial sizzors to cut the outline of the board and it comes out like diecut you can even sand the edge on paper while it is off the board before you apply it but I never did. I liked the fresh mint look of it. For the logo I used exacto #11 blade and like another comment said pop holes where the trucks mount to set yourself up. Use hair dryer when rolling will not come up when dry.
vinny spina mate . I know . It killed me to but that’s the only way I knew to do it . Well you live and learn 😀😂 thanks for the tips 🙂
@@rickyspires7787 yeah. Great job with the top graphic, but the file is just to trace the board, before cutting the excess grip with your razor/knife. But, anyway, 3 years later, I’m sure you know this now.
He's planning on skating it in the rain haha, good job mate.
Yea don't cut your tape with a file.. File then knife..
THis was a lot of work, so I just left a basic cutout and cut the rest of the grip into odd shaped pieces or puzzle pieces.
I did spider web, with orange grip tape, once turned out wicked crazy got lots of attention. 😎
Hiya,
Great job, i love the old Powell decks.I'm 49 and getting back into skateboarding old deck or nu deck ? thumbs up subbed ☝🛹
Just started skateboarding again at 45 - 2 months ago.
@@finejustgivemeaname Good to hear that man i'm glad skateboarding as found me again. Stay cool ;_)
wow, nice demo video , pretty nifty way to cut out . pretty nifty, some would go for a sheet of clear grip, but yours came out really nice. Hat´s of to your skills., thanx mate
Good vid but we need to work on your right and left a little as you flipped the mounting location of the logo (L/R) , Beyond that it was pretty good yet I have to ask.....is there a better way that just filling the paint off your new board? maybe masking the edge ???
Better off running a blunt object round the edge, like the shaft of a screwdriver, then trimming the grip tape with a razor blade.
Thanks for your feedback. I will try that next time and I can't believe I got the L/R wrong after all that. hahahaha
Best board ever! Close 2nd for me would be the Hosoi Hammerhead.
Very helpful this is exactly what I need
Ashton Coats thanks . Someone on my next video pointed out the it would be better to drill the holes for the tall before gripping ;)
I'm doing this when my ripper gets here looks sick!!
great job!!!
I would always use a heat gun and a wallpaper edge roller. Heat up the back of the grip tape with the heat gun before you remove the paper. Make a cut across the center of the grip tape and start in the middle, rolling the tape on top with the wall paper roller while pulling the paper out from underneath one side at a time. Then do the opposite side. Heat the whole board up and roll it out with the wall paper roller afterwards
What width is this deck
Robb Nairn it’s a
Powell Peralta Caballero Street Skateboard Deck Navy/Red - 9.625 x 29.75
Wow!!
Awesome, thanks!
Awesome man Laconte content
Wtf!!!
Be a man, cover that shit up and skate the fuck out of it