Sir meri washing machine ki motor replacement k baad its not working like original. Or washing k time bhi beech me cycle miss karti h . Spin me sound bhi badh gaya h. Kya kuch belt ka bhi issue hota h please suggest
I can't say for sure what the intended cycle and sound is like Problem: The drum vibrates excessively, causing instability. This could be due to unbalanced laundry. To address the vibration, the machine has two safety features: Vibration sensor: When vibration exceeds a certain threshold, the sensor triggers. Door sensor: If the vibration occurs with the door open, the sensor prevents spinning. Consequences of vibration: If the vibration sensor triggers while the door is closed: The motor stops for a few seconds, allowing the laundry to redistribute. The cycle resumes if the vibration subsides. Belt issues: A loose belt can also cause slow drum rotation. Ensure proper belt tension during motor replacement to avoid this issue. Remember specific rules for belt installation depending on the machine model. Common washing machine noises are caused by this part Other thing Capacitor, makes a buzzing sound but the drum does not rotate. Meanwhile, information from you The problem we know is there
Very sad with buying Samsung Washine Machine, the same issue with here, verly slow spin... I guess this slow spin or no spin is an issue of Samsung washing machine products
Slow spinning: This could be caused by a loose or worn belt that needs tightening or replacement. No spinning, sometimes slow spinning: Triac chip (drum stop spinning, or only one direction): This critical component can be damaged by a short circuit or overload. You might need a professional to diagnose and replace it. Example replace board Capacitor under the drum: A broken or disconnected cable connected to the capacitor could be the culprit. This is also best checked by a technician. Characteristics: The washing machine is buzzing because the motor cannot rotate due to a lack of power from the capacitor Hopefully this information can help
The washing machine's inability to turn on is a more complex problem than we realized. Our recommendation is to have a qualified service center repair it. For those comfortable with some DIY troubleshooting, here's a helpful tip: Check the drum rotation speed. If it's not spinning at all, proceed to the service center recommendation above. If the drum spins slowly but doesn't completely stop, this video might offer a solution. Check belt tension For very slow, buzzing drum rotation, the issue likely involves components beyond this video's scope. You can try visually inspecting the capacitor to see if its connector is loose or the cable is broken. WARNING: Risk of electric shock from capacitors" However, for repairs beyond basic checks, we strongly recommend a professional service.
The washing machine drum rotates normally, and there seems to be no issue with the power supply. During the wash cycle, the pulsator (the finned disc beneath the drum) rotates back and forth. Two transistors, known as triacs, regulate the rotation of the pulsator. If one of these triacs is damaged, you will need to contact a qualified appliance technician. In Indonesia, technicians will assess the severity of the damage. In some cases, they may recommend replacing the entire control board module, while in others, they may be able to repair a broken trace (a thin line on the circuit board) using a jumper wire. A jumper repair is typically a more affordable option compared to replacing the entire control board. If you are comfortable doing so, you can open the washing machine and inspect the control board for any visibly burnt or discolored components. However, it is important to note that attempting to repair an appliance yourself can be risky and is not recommended unless you have the necessary knowledge and experience. Another unexpected thing Weak capacitor, loose connector, broken cable This is simply a personal experience I wanted to share. I sincerely hope this information proves helpful
Thank you very much for properly demonstrating how to tighten the belt .
You are welcome Jos
Thanks for teaching me how to loosen or tighten bet sir .
Good Technical Knowledge sharing thank you
Thank Nar
Wonderful. Thanks, though I have not done it but its great to learn something new.
Thank you Ken
Thank you
Kya aap please batayege ye kaam k liye washing machine wale ko kitna Dena hoga
Thanks .. I like the background music how can I get it
Mossy-Enchantment ua-cam.com/video/S6rbfzutFfY/v-deo.html
Sir meri washing machine ki motor replacement k baad its not working like original. Or washing k time bhi beech me cycle miss karti h . Spin me sound bhi badh gaya h. Kya kuch belt ka bhi issue hota h please suggest
I can't say for sure what the intended cycle and sound is like
Problem:
The drum vibrates excessively, causing instability. This could be due to unbalanced laundry.
To address the vibration, the machine has two safety features:
Vibration sensor: When vibration exceeds a certain threshold, the sensor triggers.
Door sensor: If the vibration occurs with the door open, the sensor prevents spinning.
Consequences of vibration:
If the vibration sensor triggers while the door is closed:
The motor stops for a few seconds, allowing the laundry to redistribute.
The cycle resumes if the vibration subsides.
Belt issues:
A loose belt can also cause slow drum rotation.
Ensure proper belt tension during motor replacement to avoid this issue.
Remember specific rules for belt installation depending on the machine model.
Common washing machine noises are caused by this part
Other thing
Capacitor, makes a buzzing sound but the drum does not rotate.
Meanwhile, information from you
The problem we know is there
Very sad with buying Samsung Washine Machine, the same issue with here, verly slow spin... I guess this slow spin or no spin is an issue of Samsung washing machine products
Slow spinning:
This could be caused by a loose or worn belt that needs tightening or replacement.
No spinning, sometimes slow spinning:
Triac chip (drum stop spinning, or only one direction): This critical component can be damaged by a short circuit or overload. You might need a professional to diagnose and replace it. Example replace board
Capacitor under the drum: A broken or disconnected cable connected to the capacitor could be the culprit. This is also best checked by a technician.
Characteristics: The washing machine is buzzing because the motor cannot rotate due to a lack of power from the capacitor
Hopefully this information can help
Thanks
You are welcome Mon
Hey my washing machine is doing the same as that 1, bad sound , doesn't spin yoh please help me 😢
The washing machine's inability to turn on is a more complex problem than we realized.
Our recommendation is to have a qualified service center repair it.
For those comfortable with some DIY troubleshooting, here's a helpful tip:
Check the drum rotation speed. If it's not spinning at all, proceed to the service center recommendation above.
If the drum spins slowly but doesn't completely stop, this video might offer a solution. Check belt tension
For very slow, buzzing drum rotation, the issue likely involves components beyond this video's scope. You can try visually inspecting the capacitor to see if its connector is loose or the cable is broken.
WARNING:
Risk of electric shock from capacitors"
However, for repairs beyond basic checks, we strongly recommend a professional service.
Hi my machine can spin but can't Wash mode,can U let me known what to check
The washing machine drum rotates normally, and there seems to be no issue with the power supply.
During the wash cycle, the pulsator (the finned disc beneath the drum) rotates back and forth.
Two transistors, known as triacs, regulate the rotation of the pulsator.
If one of these triacs is damaged, you will need to contact a qualified appliance technician.
In Indonesia, technicians will assess the severity of the damage. In some cases, they may recommend replacing the entire control board module, while in others, they may be able to repair a broken trace (a thin line on the circuit board) using a jumper wire.
A jumper repair is typically a more affordable option compared to replacing the entire control board.
If you are comfortable doing so, you can open the washing machine and inspect the control board for any visibly burnt or discolored components.
However, it is important to note that attempting to repair an appliance yourself can be risky and is not recommended unless you have the necessary knowledge and experience.
Another unexpected thing
Weak capacitor, loose connector, broken cable
This is simply a personal experience I wanted to share.
I sincerely hope this information proves helpful
Washing machine no de