I have much respect for you sir. Thank you for your awesome contents and fun making bloopers. I am a true Patriot. I will stay strong, keeper of great courage.. God bless America, long live the Republic! SFMFs!!
I just purchased a new 1911 to replace the one I sold a few years ago. I upgraded to a Dan Wesson Specialist chambered in 9mm, amazing handgun. My father has a Springfield 1911A-1 chambered in.45 acp which will be mine when dad passes away which I hope will be many years from now.
I’ve always been a 1911 guy when it comes to carry just because they felt most natural to me, but once I picked up a CZ 75 it was a game changer. Long story short my new carry is a 75 PCR lol
YEAH! Although my P-01 is alloy framed, it's all metal. As for the 97, everyone who picks it up shoots it better than any pistol on the table. Both pistols feel like they grew out of your palms with the right grips. CZ is my horse, even if they never win a race, still my horse.
UPDATE: Been having problems going with the slide seating back complety into battery after 100 plus rounds through it. Porblem turns out to be the 'Guide Rod", it's totaltaly unacceptable how rought they left the machining on the guide rod. When the gun got dirty the rough guide rod trapped dirt between it and the spring, thereby slowing down the slide and thereby hinderened the slide from returning to full battery. Put guide rod on drill press and sanded with 400 grit sandpaper then buffed with rubbing compund on t6he buffer. bun runs fine now.
THAT is a very attractive gun! The combination of grips, Stainless Steel forged construction, nicely executed slide cuts, recessed crown bull barrel, and the U-notch sights really works for me. Thanks for a great review!
They do make a 4.25" 45 emissary, I ordered on, the cost was $1299.99. I wound up purchasing a Dan Wesson 45 vigel 4.25" for the same exact cost. Went home with Dan 😁
Wish they made a 5" 9mm Emissary with a stainless slide as well, and front serrations down the sides and I would buy it in a heartbeat. And if they made this 4.25" 1911 9mm in stainless with a rail, I'd buy that too!
Hello sir I'm riaz from Pakistan and I'm an gun lover and collector i learn so much from your video and know about the weapons and ammo how to store weapons and ammunition safety measures Thanks for sharing you experience and expertise with us . God bless you love from Pakistan 🇵🇰
@@microchrist6122 yes. They should’ve just made it in 38 Super/9x23winchester, but everyone suddenly loves 9 mm these days. It’s funny to me, because everyone hated it when I carried it in My BHP decades ago. It is a good caliber and was then as well, but it has a lot of Limitations with respect to bullet weights and case capacity. For example; I have this exact pistol in 45 ACP and run underwood 45 ACP 120 grains at 1450 fps for self defense loads, and 45 ACP 255 grains at 925 fps for a woods load, and it is excellent. In addition, I can run 45 ACP, 45 Super, 45 SMC, or get a 460 Rowland kit, but if they ever make one in 38 Super, I will buy another one.
Handsome handgun, I generally prefer the commander configuration and it seems that EVERYONE is now producing 1911 frames in one form/caliber or another, very adaptable, recently purchased my 1st ever, in commander size but in the proper. 45, my very 1st firearm was a " here, son, why don't you try this" hand-me-down from my dad, a .38 super in a 1911 frame by Llama, loved the caliber but the gun itself not a great build (metallurgy issues?), on a side note, there are a TON of reviewers out there and maybe too many "personalities", I've pretty much eliminated many but always enjoy your informative, humorous and straightforward posts, thanks for the info
Man I love this channel. Sootch does such a good job. I'm def a 1911 45 guy, I'm done with the double stacks plastic toys, after I got a 1911 I never looked back. I use to talk smack about 1911s until I shot one. Big difference imo. But it's what I trust. I'd like to have the commander 9mm for training.
Wow! What a nice 1911. Springfield Guns are real nice, reliable and affordable. I currently own two Springfield 1911’s My favorite round is the 45 ACP, but I also have 9mm and 22LR 1911’s . Thank you for all this informative reviews that help us to make better decisions when it comes to get a new gun, keep it coming! 😀
I used to own the firestorm 45 ACP in stainless years ago it was a beautiful gun and held 10 rounds plus one . thing about that gun was it jammed every time you pull the trigger and it was new straight outta box it was a beauty a lot nicer gun than that Springfield to be such a cheap gun but you couldn't shoot it but one time and it woulld jam no matter what the ammo was just a thought one of you guys that are geniuses with firearms could have probably fixed it easily
Incredible gun, very high range! As always an AudioVisual combination like few times seen... congratulations, it's always a pleasure to see your videos for that combination of Quality... I know that behind a video there are many hours of work. Hug from Buenos Aires Argentina from the entire BAND of #CONDICIONZERO
@@sootch00 | I have been watching your videos for several years, and you are very professional, beyond the fact that the content is impeccable, you have all the details covered, impeccable. When I started editing videos, generating content for my UA-cam Channel, I realized everything behind it. As for the Ballester Molina... a very good armament, and even with conversion to caliber 22lr in the same pistol... a spectacle! I send you a big hug from all of Argentina and from THE BAND of #CONDICIONZERO
Damnit Don.....not to say you did it....but it is because of you! My gun boner is not gonna go down for days! I just got the Ronin 9mm and it is awesome. Now I have to buy the Emissary 9mm. I run primarily HK P30s in different configurations....and I have a couple FN 509s....and a really refined and custom Glock19....but I have been playing around with 1911s lately and want this one bad. I sold my Les Baer custom concept viii a while ago and have regretted it more than probably any gun I have ever sold....no more selling guns. Dan Wesson probably makes the best non custom 1911, but Springfields have really impressed me.
Just bought the pistol. My fist gun ever!!!!! Really excited to get it. Thanks for the amazing review. Any recommendations for good holsters and gun safes would be greatly appreciated.
Appreciate all your videos..this one is informative and well organized..thank you ..I literally purchase each gun you review and endorse. This is getting costly !!!
I done a number of reviews of RIA 1911's but it's been a while. They are solid pistols for the money. If I have a chance to get one of their newer models, I'll definitely do a review. Thanks Blitzz
I wish more manufacturers would include _ambi_ safeties on their 1911's. There are a lot more truly ambidextrous people in the 2A community than you would think, myself included. When it comes to 1911's I prefer that everything is included straight from the factory. I am not interested in tinkering with 1911's. It is the one platform that I absolutely adore and yet, have no interest in modifying other than aftermarket grips. Furthermore, I wish there were more standard capacity (double stack) 1911's on the market that didn't cost over $3k+. Yes, I am well aware that Rock Island Armory exists. However, my point remains the same. Nonetheless, I wish Springfield Armory would step up their game and deliver more *'Loaded, Operator & TRP'* models. I would also like to see the *_'EMP Conceal Carry Contour'_* make a return. These Ronin models just don't appease me. Stay classy my friends.
I'm the opposite... I dislike ambi guns. I can manipulate a right-handed gun with my left hand and the safety on the right just makes the gun wider and is in the way.
You may get your wish! SA is in the stages of bring out a new double stack 1911/2011. Yeah, I know. Staccatos has the term trademarked. So we can't call anything but a Colt a 1911? It's too late. the name is out of the bottle much like any circular saw was called s Skill saw at one time, regardless of who made it. KnifeMaker
I've been looking for a 1911 to edc that one is beautiful but looks a little to big I did just pick up the hellcat rdp after watching your review I'm just hoping it's worth the 900 dollar price thanks so much for all your reviews
Yeah yeah, 1911 doesn't have the capacity of a modern gun. It never will, it's not the point of this gun. You're not the market, or it's not for your carry gun.
Got mine a week ago in 9mm, great gun, but with anything there are drawbacks to the gun. 1. Square trigger guard means gun will not fit 90 percent of your 1911 holsters. 2. Unless you have lumber jack hands you will need to hit the fore-grip with a stone or file, way too rough. 3. Mag well will only accept "flat bottom" mags. Magazines that have sort of a curved bottom will bind and not work. Other than that great gun.
@@PedroGarcia-ob5yw As with many of Springer's 1911 chambers they are tight. I mirror polished the feed ramp and chamber. Ran fifty CCI brass case and 100 Freedom Munitions steel case through it yesterday without any malfunctions. The only problems I've ever had was with LAX reloads. I always do the "plunk" test dropping the reload into the barrel prior to shooting them in any of my Springfields. If a reload fails the "plunk" test I use it in a plastic gun, they will feed anything.haha Also running Wilson mags can't hurt if your having any feeding problems. Good luck.
Any feeding or ejection issues? I've seen a couple of reviews, and in those reviews replies from Emissary 9mm owners, stating that they've had several issues with feeding and ejection.. Several owners commented having these issues even after 800+ rounds through the gun. They were hoping it was a 'break-in period', but doesn't seem like it.
It's ridiculous to have such a large and heavy gun with only 9 cartridges 9 mm. While today there are ultra compact with 10 cartridges and especially I have my 43 most contact with the same capacity.
@sootch00 Springfield just released a blacked out version of the Emissary. The 4.25” full rail in 9mm and 45acp size looks amazing. Please make a video on the new release. I’m especially wanting to see a close up of the barrel differences between the 4.25” (full ramp) vs the 5”. The blacked out versions retain the SST frame (although Cerokote black).
Only thing that I'm not a fan of is the price... but a good 1911 isn't cheap and in most cases.... cheap 1911's aren't that good. Thanks for another awesome review.
Nice gun, my complaint is that Springfield Armory puts a ridiculous polymer (plastic) trigger on this beautiful gun. Springfield, would it have been that much trouble to put a steel or aluminum trigger on this gun? That's my gripe! As usual, Sootch00 does great reviews, and I enjoyed watching. Thanks!
The average round expenditure in self-defense situations is 3 rounds. A 9+1 round 9mm 1911 is more than enough unless you are going into a warzone. Especially is you carry a second or third mag. I own this pistol and I would carry it if I didn't live in Canada where carry was illegal.
What are you doing watching a Springfield Armory handgun review? I get the impression that a lot of people don’t care where things are manufactured and definitely don’t care about the political BS. What you get for your money is all that matters these days.
I was just ready to pull the trigger on the Ronin Commander size because I didn't think the 4.25" was available in Emissary. Between the two, which is better? Emissary or Ronin?
A good friend recently picked-up this pistol...well, it fired quite nicely...but something so not right with an 1911 (although I may consider 10mm) not being chambered in 45 ACP IMO. Just me, I know...but that's how I feel. Personally, I'm grabbing my CZs, Berettas and Sig Sauers if I'm going 9mm - 45 ACP means I'm grabbing a 1911, HK45 or CZ 97. Finally, I've had a Springfield SA-35 on pre-order (for several months now - waiting for the prices to come down to retail)...to me, it's a 9mm that has an OG 1911 feel to it. C'est la vie. Enjoyed...but not 1911 9mm for me.
I was in Tennessee for 10 days and I carried the CZ 97 almost every day. Tennessee has some pretty liberal gun laws as far as concealed carry and honoring permits from other states, so I wasn't all that concerned about printing. I get dressed and ask my wife, "Can you see my gun?". She answered yes... I said, "Good, let's go".
@@marksd5650 -- Maybe a 2011 would have enough capacity difference to make this point, but 9+1 in 9mm VS 8+1 in .45 is not a big deal. Almost any non-1911 9mm carry-size pistol will hold 15+1 rounds... now THAT is enough of a difference where 9mm would be the wise choice. Many now live in 10-round-magazine states, so if I can only have 10, I want 10 of the biggest Jesus-rocks I can get (M&P .45 is 10+1, CZ .45 is 10+1). If capacity is what's important, the one criterion that does not favor the 1911 is capacity... in any caliber.
When are they going to wise up and start offering these new release models of 1911's with optic cuts? The slides are pretty thin at .90" but a Holosun 507K sitting on top would be awesome. If it came with optic cut I would go buy one tomorrow.
I might spring for a Dan Wesson But 5k for a at max 1600 dollar weapon is retarded unless you are pretty wealthy and if you are you know of a thing called diminishing returns Somethings just aren't as efficient
I love the look except the Dark top. For some reason it just looks like the wrong slide is on the gun to me. I see so many people love dark slides. I feel like I must not see it the same way.
Mentioned it has a firing pin block, but I'm pretty sure none of Springfields 1911s are built that way. Also when showing the bottom of the slide when disassembled no plunger can be seen.
I never shot a 1911. Everyone I know says it's not good for self defense because of low capacity I am assuming. Any handgun I buy has to be good enough for self defense of all means. I got to do more research
@@marksd5650 that's true as well. I guess I want more compacity just because it's available. I don't care if gun plastic or steel as long as it is well made. But you clarify things I am looking into Dan Wesson 10mm 1911 don't know what model. Probably going for $1500+ range and I will explore other 1911 models. What brands you suggest beside Dan Wesson? and do they have option for atheist 12rounds but 10 is good as well.
@@marksd5650 ok will look into it and thanks. It socks that up in your region gun laws are so dam strict. Once again thanks for recommendations if you have any in the future please feel free to share
I’m in between this and the Bul 1911 commander 9mm. Any thoughts? I haven’t shot either so any recommendations or opinions will be greatly appreciated.
I love Springfield's.. they are my carry firearms,XD.REally wanted the ronin EMP smallest 1911.but I'm in Cali..so the bone head gov don't let us have that here....or the hellcat..
![5 Best 1911 Handguns For The Money [You'll Fall in Love]](http://i.ytimg.com/vi/ygvDGDE9btc/mqdefault.jpg)
I have one of these in 45 ACP. It is an excellent pistol. Thanks for the video.
After watching so many of your videos now, I have to commend you Sootch. You're such an excellent presenter! Goodonya, mate.
I have much respect for you sir. Thank you for your awesome contents and fun making bloopers. I am a true Patriot. I will stay strong, keeper of great courage.. God bless America, long live the Republic! SFMFs!!
I just purchased a new 1911 to replace the one I sold a few years ago. I upgraded to a Dan Wesson Specialist chambered in 9mm, amazing handgun. My father has a Springfield 1911A-1 chambered in.45 acp which will be mine when dad passes away which I hope will be many years from now.
Great presentation 👍
One word: CZ 75 9mm and 97 .45. no paper clip needed, full side grips, like shaking hand with god. Full metal goodness👍
I totally agree with you on Cz’s, the first time I picked one up I thought it was custom made for my hands.
I’ve always been a 1911 guy when it comes to carry just because they felt most natural to me, but once I picked up a CZ 75 it was a game changer. Long story short my new carry is a 75 PCR lol
The CZ 97 was just discontinued in 2022. Glad my FFL had one in stock! _Had_ being the key word.
YEAH! Although my P-01 is alloy framed, it's all metal. As for the 97, everyone who picks it up shoots it better than any pistol on the table. Both pistols feel like they grew out of your palms with the right grips. CZ is my horse, even if they never win a race, still my horse.
@@thatotherguy7647 -- My EDC is now the P-01... I am also an old, die-hard 1911 guy. I haven't fired the 1911 since I bought my CZ 97B.
That 4.25” model feels exceptionally nice and balanced in the hand, at least the 45 model does.
Would it be too much the recoil difference to the 9mm?
This emissary in 4.25 are perfect I wish I could have one thank you for bringing it to the channel Sir
UPDATE: Been having problems going with the slide seating back complety into battery after 100 plus rounds through it. Porblem turns out to be the 'Guide Rod", it's totaltaly unacceptable how rought they left the machining on the guide rod. When the gun got dirty the rough guide rod trapped dirt between it and the spring, thereby slowing down the slide and thereby hinderened the slide from returning to full battery.
Put guide rod on drill press and sanded with 400 grit sandpaper then buffed with rubbing compund on t6he buffer. bun runs fine now.
Nice opening.... 1911 been around since 1911. 1911 Emmesary just needs motto "I come in peace". Good stuff Mr Sootch.
Thanks Brother. Yeah, the 1911 has been around since 1911 Lol!
@@sootch00 Always enjoy your videos!
THAT is a very attractive gun! The combination of grips, Stainless Steel forged construction, nicely executed slide cuts, recessed crown bull barrel, and the U-notch sights really works for me. Thanks for a great review!
It's a sweet pistol for sure. Thanks for watching!
That's one ugly 1911 IMO lol 😆
@@sootch00 You have a scammer attacking people in your chat.
@@sootch00 you have a scammer going after people. Almost got me. Then I told them where to go
@@sootch00
this is the scammer thats been using your name 👇👇
ua-cam.com/channels/v8Wu6cplUCmkNcBNseUquA.html
Beautiful Gun!! Nice seration on top! One of the best,honest gun reviewers on UA-cam! Thanks Sootchoo! God bless you Sir!
It still amazes me that that double stack 1911s aren't in the usual manufacturers product lists yet. Only ones doing it are Bul armory and armscor.
Before Sticker fire polymer guns Double stack 1911's were all the rage 35 years ago
2011
@@ratboyjersey 2011 is trademarked by sti, now staccato.
Uhh.....Prodigy.
@@wehrewulf comment made way before the prodigy was released. in retrospect, springfield probably saw this and got inspired. you're welcome.
They do make a 4.25" 45 emissary, I ordered on, the cost was $1299.99. I wound up purchasing a Dan Wesson 45 vigel 4.25" for the same exact cost. Went home with Dan 😁
Wish they made a 5" 9mm Emissary with a stainless slide as well, and front serrations down the sides and I would buy it in a heartbeat.
And if they made this 4.25" 1911 9mm in stainless with a rail, I'd buy that too!
Hello sir I'm riaz from Pakistan and I'm an gun lover and collector i learn so much from your video and know about the weapons and ammo how to store weapons and ammunition safety measures Thanks for sharing you experience and expertise with us .
God bless you love from Pakistan 🇵🇰
Do not EVER stop making those 1911s!!
dayum... that is one fine looking 1911. Good job SA.
10mm is my sweet spot. But I’ve never ran a 9mm in 1911. Thanks for the info.
10mm is the deal but shooting 9mm is a sweet expereince. Thanks for stopping by!
Always felt like 1911 was too much gun for a 9mm round…I like the idea of a commander like this for the smaller round
@@microchrist6122 yes. They should’ve just made it in 38 Super/9x23winchester, but everyone suddenly loves 9 mm these days. It’s funny to me, because everyone hated it when I carried it in My BHP decades ago. It is a good caliber and was then as well, but it has a lot of Limitations with respect to bullet weights and case capacity. For example; I have this exact pistol in 45 ACP and run underwood 45 ACP 120 grains at 1450 fps for self defense loads, and 45 ACP 255 grains at 925 fps for a woods load, and it is excellent. In addition, I can run 45 ACP, 45 Super, 45 SMC, or get a 460 Rowland kit, but if they ever make one in 38 Super, I will buy another one.
Handsome handgun, I generally prefer the commander configuration and it seems that EVERYONE is now producing 1911 frames in one form/caliber or another, very adaptable, recently purchased my 1st ever, in commander size but in the proper. 45, my very 1st firearm was a " here, son, why don't you try this" hand-me-down from my dad, a .38 super in a 1911 frame by Llama, loved the caliber but the gun itself not a great build (metallurgy issues?), on a side note, there are a TON of reviewers out there and maybe too many "personalities", I've pretty much eliminated many but always enjoy your informative, humorous and straightforward posts, thanks for the info
I bet the 9mm feels like shooting a 22lr
Man I love this channel. Sootch does such a good job. I'm def a 1911 45 guy, I'm done with the double stacks plastic toys, after I got a 1911 I never looked back. I use to talk smack about 1911s until I shot one. Big difference imo. But it's what I trust. I'd like to have the commander 9mm for training.
Love these 1911 reviews. What a beauty.
Wow! What a nice 1911. Springfield Guns are real nice, reliable and affordable. I currently own two Springfield 1911’s My favorite round is the 45 ACP, but I also have 9mm and 22LR 1911’s . Thank you for all this informative reviews that help us to make better decisions when it comes to get a new gun, keep it coming! 😀
I am really a 1911 fan. I love my Colt gold Cup .45 acp and my Browning HP in 9mm and .40 S&W., but that's a real looker for a pistol.
That is exactly what I would love to have. Mag-Na-Port would be my next step and it would be DONE!!!
I used to own the firestorm 45 ACP in stainless years ago it was a beautiful gun and held 10 rounds plus one . thing about that gun was it jammed every time you pull the trigger and it was new straight outta box it was a beauty a lot nicer gun than that Springfield to be such a cheap gun but you couldn't shoot it but one time and it woulld jam no matter what the ammo was just a thought one of you guys that are geniuses with firearms could have probably fixed it easily
Beautiful looking and thank you for the info my friend
Incredible gun, very high range! As always an AudioVisual combination like few times seen... congratulations, it's always a pleasure to see your videos for that combination of Quality... I know that behind a video there are many hours of work. Hug from Buenos Aires Argentina from the entire BAND of #CONDICIONZERO
Thanks Brother! I appreciate the kind words. One of my favorite 1911's is the Model 1927 and I also love my Ballester Molina.
@@sootch00 | I have been watching your videos for several years, and you are very professional, beyond the fact that the content is impeccable, you have all the details covered, impeccable.
When I started editing videos, generating content for my UA-cam Channel, I realized everything behind it.
As for the Ballester Molina... a very good armament, and even with conversion to caliber 22lr in the same pistol... a spectacle! I send you a big hug from all of Argentina and from THE BAND of #CONDICIONZERO
Damnit Don.....not to say you did it....but it is because of you! My gun boner is not gonna go down for days! I just got the Ronin 9mm and it is awesome. Now I have to buy the Emissary 9mm. I run primarily HK P30s in different configurations....and I have a couple FN 509s....and a really refined and custom Glock19....but I have been playing around with 1911s lately and want this one bad. I sold my Les Baer custom concept viii a while ago and have regretted it more than probably any gun I have ever sold....no more selling guns. Dan Wesson probably makes the best non custom 1911, but Springfields have really impressed me.
@@marksd5650 may I ask why the ronin was bad?
filling bullets in gun so satisfying
Just bought the pistol. My fist gun ever!!!!! Really excited to get it. Thanks for the amazing review.
Any recommendations for good holsters and gun safes would be greatly appreciated.
Congrats man
You picked a great gun to get into guns
Love the Emissary in 45cal
I just bought the Prodigy also 👍🏻
Sootch hate to be a back seat commentator but the Emissary is not equipped with a firing pin block. It is a series 70' style.
Appreciate all your videos..this one is informative and well organized..thank you ..I literally purchase each gun you review and endorse. This is getting costly !!!
Shoot fast ohhhh yeah……. Sweet treat…..
Man I love the all around look af that 1991.
Sootch, can you make some reviews of Rock Island Armory's Rock Series or Tac Series 1911 pistols? Thanks in advance
I done a number of reviews of RIA 1911's but it's been a while. They are solid pistols for the money. If I have a chance to get one of their newer models, I'll definitely do a review. Thanks Blitzz
I wish more manufacturers would include _ambi_ safeties on their 1911's.
There are a lot more truly ambidextrous people in the 2A community than you would think, myself included. When it comes to 1911's I prefer that everything is included straight from the factory. I am not interested in tinkering with 1911's.
It is the one platform that I absolutely adore and yet, have no interest in modifying other than aftermarket grips.
Furthermore, I wish there were more standard capacity (double stack) 1911's on the market that didn't cost over $3k+. Yes, I am well aware that Rock Island Armory exists. However, my point remains the same.
Nonetheless, I wish Springfield Armory would step up their game and deliver more *'Loaded, Operator & TRP'* models. I would also like to see the *_'EMP Conceal Carry Contour'_* make a return. These Ronin models just don't appease me.
Stay classy my friends.
Ambi for double pistols! One in each hand.
I'm the opposite... I dislike ambi guns. I can manipulate a right-handed gun with my left hand and the safety on the right just makes the gun wider and is in the way.
I agree with the ambi safeties!!
You may get your wish! SA is in the stages of bring out a new double stack 1911/2011.
Yeah, I know. Staccatos has the term trademarked. So we can't call anything but a Colt a 1911?
It's too late. the name is out of the bottle much like any circular saw was called s Skill saw at one time, regardless of who made it.
KnifeMaker
That is one beautiful pistol.
I've been looking for a 1911 to edc that one is beautiful but looks a little to big I did just pick up the hellcat rdp after watching your review I'm just hoping it's worth the 900 dollar price thanks so much for all your reviews
Thank you!
Thinkig hard, must get!!!!!!!!!!!!!!!!
Not a 1911 fan but as always a thorough review
Nobody builds production 1911s like Springfield
The 9mm capacity of 9+1 is too few for my liking, especially when most new micro 9s are getting 11+1 or 13+1.
Yeah yeah, 1911 doesn't have the capacity of a modern gun. It never will, it's not the point of this gun. You're not the market, or it's not for your carry gun.
99% of civilian defensive shootings occur within 15 feet and under 3 rounds.
Who cares it's not the point!! Evidently you have no experience with 1911's for that to matter.
@@Cpt-Night-ajg agreed
@@marksd5650 agreed. Although I do like my Glock 43.
Very well presentation sir, all videos are so easy to understand, 👍👍👍
Nice!! Thanks for the review.
Beautiful gun, looks like my wife might be getting ready to get upset lol.
Got mine a week ago in 9mm, great gun, but with anything there are drawbacks to the gun. 1. Square trigger guard means gun will not fit 90 percent of your 1911 holsters. 2. Unless you have lumber jack hands you will need to hit the fore-grip with a stone or file, way too rough. 3. Mag well will only accept "flat bottom" mags. Magazines that have sort of a curved bottom will bind and not work. Other than that great gun.
Have you had any jamming problems?
@@PedroGarcia-ob5yw As with many of Springer's 1911 chambers they are tight. I mirror polished the feed ramp and chamber. Ran fifty CCI brass case and 100 Freedom Munitions steel case through it yesterday without any malfunctions. The only problems I've ever had was with LAX reloads. I always do the "plunk" test dropping the reload into the barrel prior to shooting them in any of my Springfields. If a reload fails the "plunk" test I use it in a plastic gun, they will feed anything.haha Also running Wilson mags can't hurt if your having any feeding problems. Good luck.
I love the emissary 1911’s I have the full size in 9mm 👌🏽
Any recommendation for a holster?
Any feeding or ejection issues? I've seen a couple of reviews, and in those reviews replies from Emissary 9mm owners, stating that they've had several issues with feeding and ejection.. Several owners commented having these issues even after 800+ rounds through the gun. They were hoping it was a 'break-in period', but doesn't seem like it.
Would be interested if they made this a double stack and with 9mm they should.
Not in agreement!!
beretta m9 makes this (in 9) obsolete out of the gate
@@droobie827 Beretta never made this in a 9 mm
@@enricomandragona163 Im talking about the m9. Full size all metal 9mm, but with 6 more rounds
Yes ok now that you're more specific
It's ridiculous to have such a large and heavy gun with only 9 cartridges 9 mm. While today there are ultra compact with 10 cartridges and especially I have my 43 most contact with the same capacity.
Know where you’re coming from brother. 9mm might expand. But 45acp aint gona shrink.
@sootch00
Springfield just released a blacked out version of the Emissary. The 4.25” full rail in 9mm and 45acp size looks amazing. Please make a video on the new release. I’m especially wanting to see a close up of the barrel differences between the 4.25” (full ramp) vs the 5”. The blacked out versions retain the SST frame (although Cerokote black).
Gongrats, nice pick. Look, you have 1,28 mil subscribers. Nice job. Cheers from Praha
Only thing that I'm not a fan of is the price... but a good 1911 isn't cheap and in most cases.... cheap 1911's aren't that good. Thanks for another awesome review.
Looks sweet 🔥
Great review, thank you Sir.
Nice gun, my complaint is that Springfield Armory puts a ridiculous polymer (plastic) trigger on this beautiful gun. Springfield, would it have been that much trouble to put a steel or aluminum trigger on this gun? That's my gripe! As usual, Sootch00 does great reviews, and I enjoyed watching. Thanks!
The average round expenditure in self-defense situations is 3 rounds. A 9+1 round 9mm 1911 is more than enough unless you are going into a warzone. Especially is you carry a second or third mag. I own this pistol and I would carry it if I didn't live in Canada where carry was illegal.
That is a good looking piece
Has everyone forgotten?!? After what SA did to get a legislative exemption from a gun law they helped pass in their state - they are dead to me...
What are you doing watching a Springfield Armory handgun review? I get the impression that a lot of people don’t care where things are manufactured and definitely don’t care about the political BS. What you get for your money is all that matters these days.
Why would a for profit American firearm manufacturer be anti 2A, and thus suicidal? Here's a hint: They aren't.
Too bad these manufacturers never made an ambidextrous slide release and mag release for the 1911 platform
I just need a ambidextrous safety! Pisses me off, they have included that on a .380 and 10mm models.
Awesome Review!
They should have kept the pic rail on the commander
Very detailed review 👌
I was just ready to pull the trigger on the Ronin Commander size because I didn't think the 4.25" was available in Emissary. Between the two, which is better? Emissary or Ronin?
Aluminum vs Stainless steel...
If I'm going to carry a 9mm 1911, I personally want an aluminum frame.
I am thinking about getting one. My only question....will it cycle 147gr hollow-point reliably?
Beautiful gun
A good friend recently picked-up this pistol...well, it fired quite nicely...but something so not right with an 1911 (although I may consider 10mm) not being chambered in 45 ACP IMO. Just me, I know...but that's how I feel. Personally, I'm grabbing my CZs, Berettas and Sig Sauers if I'm going 9mm - 45 ACP means I'm grabbing a 1911, HK45 or CZ 97. Finally, I've had a Springfield SA-35 on pre-order (for several months now - waiting for the prices to come down to retail)...to me, it's a 9mm that has an OG 1911 feel to it. C'est la vie. Enjoyed...but not 1911 9mm for me.
I was in Tennessee for 10 days and I carried the CZ 97 almost every day. Tennessee has some pretty liberal gun laws as far as concealed carry and honoring permits from other states, so I wasn't all that concerned about printing. I get dressed and ask my wife, "Can you see my gun?". She answered yes... I said, "Good, let's go".
@@marksd5650 -- Maybe a 2011 would have enough capacity difference to make this point, but 9+1 in 9mm VS 8+1 in .45 is not a big deal. Almost any non-1911 9mm carry-size pistol will hold 15+1 rounds... now THAT is enough of a difference where 9mm would be the wise choice.
Many now live in 10-round-magazine states, so if I can only have 10, I want 10 of the biggest Jesus-rocks I can get (M&P .45 is 10+1, CZ .45 is 10+1).
If capacity is what's important, the one criterion that does not favor the 1911 is capacity... in any caliber.
Thanks.... I love this....
When are they going to wise up and start offering these new release models of 1911's with optic cuts? The slides are pretty thin at .90" but a Holosun 507K sitting on top would be awesome. If it came with optic cut I would go buy one tomorrow.
Now I've got to make up my mind. A budget RIA nineteen eleven in 9mm, or all-in with the Springfield.
I might spring for a Dan Wesson
But 5k for a at max 1600 dollar weapon is retarded unless you are pretty wealthy and if you are you know of a thing called diminishing returns
Somethings just aren't as efficient
@@marksd5650 Depends on the person.. You could mod the RIA, if that's what you're into..
Nice Gun?
Why does mine constantly JAM, NO FEED, and just a piece of JUNK? $1400 and it does not work.
Same issues with mine, absolute garbage
I am glad I paid the insurance money
they sent it back MFG. Company.@@southsidepatrol66
I would like to see 25 yard groups when do reviews on the fine firearms
Is the high power on shelves yet? Another year for this? What not ready for optics? I have room for it!
Just back fr the range ! Terrible can’t get 2rounds without it jamming! So disappointed ☹️
Now I know y glocks r so popular
I love the look except the Dark top. For some reason it just looks like the wrong slide is on the gun to me. I see so many people love dark slides. I feel like I must not see it the same way.
Mentioned it has a firing pin block, but I'm pretty sure none of Springfields 1911s are built that way. Also when showing the bottom of the slide when disassembled no plunger can be seen.
Got a Kimber looking style to it
Very,very nice gun.👍
Hey Sootch, how does this compare to the bul armory commander 9mm?
Pozdrawiam super blog👍👍
Just about to watch the video and i have to say no, the tigger guard prevents it for being able to mount a recover rail.
I like it very much!
Get the .45
Just picked up a CZ 75 TS Czechmate Parrot. Haven't been to the range with it yet. Ever do competitive/race gun reviews?
1911 is the best pistol ever created. Browning is a genius i love it.. also the hk 45 expert is the best.
Muy bueno tu vídeo saludos desde Argentina
Not to mention 9 mm is a lot cheaper than 45 ACP
Nice!
It's almost too pretty to shoot. That is a really nice looking gun. Would definitely like to try one out. Nice video as always..
I never shot a 1911. Everyone I know says it's not good for self defense because of low capacity I am assuming. Any handgun I buy has to be good enough for self defense of all means. I got to do more research
@@marksd5650 that's true as well. I guess I want more compacity just because it's available. I don't care if gun plastic or steel as long as it is well made. But you clarify things I am looking into Dan Wesson 10mm 1911 don't know what model. Probably going for $1500+ range and I will explore other 1911 models.
What brands you suggest beside Dan Wesson? and do they have option for atheist 12rounds but 10 is good as well.
@@marksd5650 ok will look into it and thanks. It socks that up in your region gun laws are so dam strict. Once again thanks for recommendations if you have any in the future please feel free to share
I’m in between this and the Bul 1911 commander 9mm. Any thoughts? I haven’t shot either so any recommendations or opinions will be greatly appreciated.
Springfield needs to make a 2011. So does Sign Sauer.
HERESY!!!!!!!!!!!!!!!!
I like everything about it except the squared trigger guard.
Okay what I can’t find any info is how are holsters to find with the square trigger
Did they cheap out on the trigger appearance to put more money toward reliability ?
I love Springfield's.. they are my carry firearms,XD.REally wanted the ronin EMP smallest 1911.but I'm in Cali..so the bone head gov don't let us have that here....or the hellcat..
Why don't they build a 1911 that can be carried without being locked and loaded with a double action trigger in 9 mm
The trigger would suck
....and why you have the CZ75s as options
That would defeat the point of carrying a 1911.
nice looking but iron sights. that ship has sailed for me. i'm 50 but i have the eyes of an 80 year old. need me some red dot.