I have a 1993 XR80 all original. When you twist the throttle fast it bogs but if you ease into it it doesn’t. Went through the carb & everything meticulously and can’t figure it out. Have any pointers?
Set it level with the Surface of where the Bowl Seals. Make sure you do it wheil the carburetor is at a 45 degree angle just putting pressure on the Needle Seat.
I was using my dirt bike xr80 1986 It just suddenly shut off and I took it home but when I tryed to turn it on it just didn’t wanna any tips please 🙏
Check to make sure it has spark.
I have a 1993 XR80 all original. When you twist the throttle fast it bogs but if you ease into it it doesn’t. Went through the carb & everything meticulously and can’t figure it out. Have any pointers?
Turn the air screw out more.
@@trxtech3010 I’ve adjusted that and the ideal more times than I can count. Could the float need to be adjusted?
nice vid!!
Thanks
I wish you would have shown the float adjustment. My 80 idles high. And it’s not the idle screw.
Just raise the Float a little bit by bending the metal tab.
I have a xr80r 2003 and some days it start first kick others I can’t get it to start. Some times it pops. Please help what’s wrong with it.
Check your valve clearences. chances are your intake valve and or exhaust valve is extremely tight which hangs the valves open slightly.
What’s the right float level
Set it level with the Surface of where the Bowl Seals. Make sure you do it wheil the carburetor is at a 45 degree angle just putting pressure on the Needle Seat.
Put some chain lube on that poor bike Bro..!
I did. It's not my bike. I told the Customer to get it replaced he said he would do it.
promosm 😥