Are you properly managing other consumables? I don't know. However, when we checked various things that day... it was confirmed that there were no other major problems. 😄
The tools usually required are 8, 10, and 12mm box sockets, an electric power tool that uses an 18v battery, and a +driver. If you are prepared, you will be able to work.
I think I'm going to go for an impact Driver for loosening nuts. And a Toque wrench for tightening. Basically for loosening I'm trying to decide between 18v-20v impact driver or Impact wrench. Does it matter for loosening nuts?
If the drive face is not particularly worn, you can just replace the weight roller... In the video, since it is a delivery motorcycle and is operated in a very harsh environment, it is replaced with a set. Normally, it would be good to replace the drive face set and belt, but... Depending on the condition, only the rollers and belt may be replaced.
Dzień dobry z jaką siłą Nm dokręca pan śruby wariatora do kymco new downtaun 125 cm. Albo do innych tego typu 125. Bo widzę że używa pan klucza pneumatycznego. Chodzi mi o bezpieczną siłę podaną w Nm dla klucza dynamometrycznego. Pozdrawiam z Polski.
Dziękuję za obejrzenie mojego filmu z dalekiej Polski. Zapytanie... Wartości momentu obrotowego układu napędowego Kimco Downtown 125 są następujące. Strona ciśnieniowa układu napędowego nakrętka czołowa napędu koła pasowego określony moment obrotowy. Moment obrotowy: 5,5 ~ 6,5 kgf-m (55 ~ 65 Nm) tył układu napędowego zewnętrzna nakrętka sprzęgła Dokręcić nakrętkę określonym momentem obrotowym. Moment obrotowy: 5,0 ~ 6,0 kgf-m (50 ~ 60 Nm) Powyższe wartości momentu obrotowego są danymi starymi, Ponieważ nie ma danych dotyczących nowych motocykli, nie znamy wartości momentu obrotowego nowych motocykli. (폴란드어)
The DAF55 and other Variomatics had 2 drive belts on their car transmissions and they lasted well back in the 1960's.. rubber technology and belt reinforcement fibres have had 55 years of development to get much better...
There are no scenes using a torque wrench in the video above. However, it is recommended that those who do this type of work use a torque wrench for maintenance.
@@MotorcycleRepair Exactly, but aren't you supposed to use a torque wrench when tightening the clutch and variator? You used an impact wrench with no regard to torque settings, why?
@@starlord2660 First of all, every bolt, nut, and screw on a motorcycle has a specified torque value. In principle, it is correct to perform all work in accordance with the torque value. The work shown in the video... I'm not telling you how to maintain it. The purpose is simply to show the work process and to record it. It could be something like, “You can do it this way,” but... I'm not saying, "Do it like this." I don't know if the work of the mechanic in the video is possible because he has a lot of experience and work skills, but In general, this may not be a good method for unskilled people to follow. therefore ... I think you can just look at it for fun and think, "Ah, there are people who work that way..."
Me está dando fallo motor mi honda vision 110 2021 de que puede ser? Le cambie hace 2 días la bujia, aceite motor y la válvula de la caja de transmisión? Ayudame maestro
@@JesusAguilar-gw2oi El problema con el motor que no arranca es... Comprobar suministro eléctrico del generador. Problema con la bobina de encendido...mal contacto o cable defectuoso Problema con la bujía... Problema en el rectificador del regulador.. Problema con el filtro de aire.. Compruebe si la batería +/- está bien apretada. Conectado al chasis de la motocicleta - Asegúrese de que el negativo a tierra esté bien apretado. En la mayoría de los casos, puedes descubrir el problema comprobando esto. Desafortunadamente, esto no es algo que pueda comprobar directamente... No bastaría con hacértelo saber en este comentario. Utilice esto sólo como referencia.
it's very fun to watch other mechanic from abroad handle the bike, keep good work🙏🙏
Thank you for a good look. I will upload it diligently. 😊
오늘도 수고하셨습니다 ~
블랙와인님 댓글을 남겨 주셔서 감사드립니다.😄
1등 ㅎㅎ
오늘도 좋은 영상 감사합니다 🙏 💕
빠르게 댓글을 남겨주셔서감사드립니다. 🎉🎊🎉🎊
8미리 볼트 빠지는 찌잉 찌잉 소리가 너무 듣기 좋네요.
기계 소리가 좋으시다니..
기계 정비 쪽으로는 나아가시면 크게 되실 분 같습니다. ㅎㅎ 😄
Gracias por el vídeo!! Que hay de cierto en que los chasis eSAF que lleva la Honda Vision se parten y oxidan con facilidad?
Eso no sucedió.
감사합니다.
김명인님 후원해 주셔서 감사합니다. 😍
비전을 8만키로를 타시면서 배달을 하시다니 대단하십니다.
기름도 적게 먹고 가볍고 작고
여자분들이나 키 170이하시거나 연세가 많으신 분들한테는 좋은 바이크죠.
@@nokiz3594 네 비전은 좋은 오토바이라고 생각합니다
뒷라이닝도 언능바꿔야겠어요ㅎㅎ
댓글을 남겨 주셔서 감사합니다 😊
Thank you for the upload
Are you properly managing other consumables?
I don't know.
However, when we checked various things that day... it was confirmed that there were no other major problems. 😄
잘보고갑니다 !! 비전 오너로서 비전 관련 영상 올라오는건 다 챙겨보고있습니다 ㅋㅋ
감사합니다. 열심히 하겠습니다. 😄
비전 좋나요?
비젼 구동계 볼트조일때 토크값점알려주세요
물론 낡긴 했지만 6만 키로는 정말 놀랍네요.
그렇쵸...믿기힘든 키로수 입니다. ㅎㅎ
Can someone make an equipment list? Which Drill wattage will do and all of the sockets etc.
The tools usually required are 8, 10, and 12mm box sockets, an electric power tool that uses an 18v battery, and a +driver. If you are prepared, you will be able to work.
@@MotorcycleRepair much appreciated. The task was well demonstrated in the video. 👌🏿
@@HOOKZIE Thank you.😄
I think I'm going to go for an impact Driver for loosening nuts. And a Toque wrench for tightening. Basically for loosening I'm trying to decide between 18v-20v impact driver or Impact wrench. Does it matter for loosening nuts?
Im going with the DeWalt DCF887 18V XR Cordless Brushless Impact Driver
영상에서와 같이 교체하면 비용이 어느정도 될까요??
일반적으로 12만원 정도면 가능하다고 하시네요
영상 비전 타이어가 혹시 어떤건지 알수 있을까요? 시티그립도 아니고 거의 PCX뒷다이야 사이즈네요;;
@@zlfbzkwmak 대부분 흥아타이어를 쓰신다고 합니다
저도 비전110타는데 요근래 갑자기 저속에서 스로틀을 살살감으면 쇠갈리는 소리가나네요 중~고속에서는 괜찮은데 ㅠㅠ😂😂 구동계 문제일까요?
집접 봐야 알겠지만...
구동계쪽 소리일 수도 있고, 브레이크 라이닝에서 나는 소리 일 수도 있습니다.
A cuantos kilómetros se cambia el aceite de transmisión trasero?
Generalmente se recomienda reemplazarlo entre 10.000 y 12.000 km.
Que cantidad(ml) de aceite de transmision lleva?
@@JesusAguilar-gw2oi La cantidad de reemplazo de aceite de transmisión es de 70 ml, y al desmontar y montar, agregue 90 ml.
80w 90w Motul o 10w 30w que aceite valdría?
@@JesusAguilar-gw2oi agregue aceite “10w 30”.
Any Daelim XQ250 videos, sir?
I'm sorry. No video has been shot yet for the Daelim XQ250.
@@MotorcycleRepair I’ll be waiting, then! Cheers from Malaysia!
@@petiperspektif1890 You're from Malaysia...
Thank you for your interest in my video! 😄
A cuantos kilometros se recomienda cambiar la correa 25.000 kilometros maximo?
Se recomienda cambiar la correa (al menos 25.000 - hasta 30.000 kilómetros).
벨트는 오래되면 고무 경화돼서 수명 짧음. 벨트 교체할 땐 제조년월을 꼭 확인.
좋은 정보 감사합니다. 😄
2021년 표준 CVT Roller Honda Vision 110은 몇 그램입니까?
죄송합니다. 개당 몇그램이나 하는지는 확인을 해보지 않아서 모르겠습니다.
15g standard. Roller size is 20×15 same with pcx.
정품벨트 품질이 뛰어나다는것이네요..고무속에 나이론원단이 들어가 있어서 갑자기 끊어지는 일도 없을것 갔아요..저도 갈려고 3만키로에 뜯어봤더니 멀쩡하네요...
아 ... 이렇게 오래도록 쓸 수 있는 경우가 더러 있군요...
좋은 정보 감사합니다.
Why you replaced the drive face? I thought you never had to replace that just the rollers.
If the drive face is not particularly worn, you can just replace the weight roller...
In the video, since it is a delivery motorcycle and is operated in a very harsh environment, it is replaced with a set.
Normally, it would be good to replace the drive face set and belt, but...
Depending on the condition, only the rollers and belt may be replaced.
궁금한게있는데 뒤에 클러치도 분해를 해야하는건가요
문제가 발견 되면 분해 후 크러치 웨이트를 교체하거나..또는 클러치 전체를 교체하기도 합니다.
그렇지 않으면, 그대로 다시 조립하여 사용합니다.
6만키로 벨트로 안보입니다.
중간에 한번 교환 햇겟죠 내말이 정확할듯 싶내요
@@yulyoon1578 네 그렇게 생각되기도 합니다
무브볼... 선한참넘은것같은데 저상태면 운행할때 상당히 불편했을것같은데 진짜 무딘 라이더인가보시네
영상을 시청해 주셔셔 감사드립니다.
Dzień dobry z jaką siłą Nm dokręca pan śruby wariatora do kymco new downtaun 125 cm. Albo do innych tego typu 125. Bo widzę że używa pan klucza pneumatycznego. Chodzi mi o bezpieczną siłę podaną w Nm dla klucza dynamometrycznego. Pozdrawiam z Polski.
Dziękuję za obejrzenie mojego filmu z dalekiej Polski.
Zapytanie...
Wartości momentu obrotowego układu napędowego Kimco Downtown 125 są następujące.
Strona ciśnieniowa układu napędowego
nakrętka czołowa napędu koła pasowego określony moment obrotowy.
Moment obrotowy:
5,5 ~ 6,5 kgf-m (55 ~ 65 Nm)
tył układu napędowego
zewnętrzna nakrętka sprzęgła
Dokręcić nakrętkę określonym momentem obrotowym.
Moment obrotowy: 5,0 ~ 6,0 kgf-m (50 ~ 60 Nm)
Powyższe wartości momentu obrotowego są danymi starymi,
Ponieważ nie ma danych dotyczących nowych motocykli, nie znamy wartości momentu obrotowego nowych motocykli.
(폴란드어)
Dzięki za odpowiedź do usłyszenia jeszcze kiedyś.Pozdrawiam.
@@bazejjanuszkiewicz8648 Thank you for your interest in my video. 😄
Jeszcze mam jedno pytanie jeśli można interesuje mnie siła podana w Nm od przedniego i tylnego koła dla Kymco downtaun .Z góry dziękuję 😃
@@bazejjanuszkiewicz8648 Your inquiry is as follows:
* Front
TORQUE VALUES
Handlebar lock nut 45 N·m (4.5 kgf·m, )
Steering stem lock nut 63 N·m (6.3 kgf·m,)
Steering stem pinch bolt 27 N·m (2.7 kgf·m)
Front axle 20 N·m (2.0 kgf·m,)
Master cylinder reservoir cover screw 1.6N·m (0.16 kgf·m)
Master cylinder holder bolt 12 N·m (1.2 kgf·m)
Brake lever pivot bolt 2 N·m (0.2 kgf·m)
Brake lever pivot nut 10 N·m (1 kgf·m,)
Brake light switch screw 1 N·m (0.1 kgf·m,)
Brake caliper mounting bolt 35 N·m (3.5 kgf·m,)
ALOC bolt: replace with a new one.
Brake caliper bleed screw 5.5N·m (0.55 kgf·m)
Brake hose oil bolt 35 N·m (3.5 kgf·m)
Install the pad pin by pushing the pads
against the pad spring to align the pad pin
holes in the pads and caliper.
Install the front caliper onto the fork leg and
then install and tighten the new two caliper
mounting bolts to the specified torque.
Torque: 35 N-m (3.5 kgf-m)
Tighten the pad pins to the specified torque.
Torque: 18 N-m (1.8 kgf-m, 13 lbf-ft)
*Rear
TORQUE VALUES
Exhaust muffler lock bolt 35 N-m/3.5 kgf-m
Exhaust muffler pipe nut 20 N-m/2 kgf-m
Rear axle nut 120 N-m/12 kgf-m
Rear shock absorber lower mount bolt 40N-m/4 kgf-m
Rear shock absorber upper mount bolt 40N-m/4 kgf-m
Rear brake caliper holder bolt 27 N-m/2.7 kgf-m
Where is the starter motor on these scooters
It's located at the back of the air filter.
6만키로 동안 구동계를 안갈았다고요 ? 대박 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
😍😍😍
대박...
😄
60 000km for a drive belt to last is crazy!
I also think it makes no sense.
But... they say that this is the first replacement after 60,000km of driving...
The DAF55 and other Variomatics had 2 drive belts on their car transmissions and they lasted well back in the 1960's..
rubber technology and belt reinforcement fibres have had 55 years of development to get much better...
Don't you have to use torque settings?
There are no scenes using a torque wrench in the video above.
However, it is recommended that those who do this type of work use a torque wrench for maintenance.
@@MotorcycleRepair Exactly, but aren't you supposed to use a torque wrench when tightening the clutch and variator? You used an impact wrench with no regard to torque settings, why?
@@starlord2660 First of all, every bolt, nut, and screw on a motorcycle has a specified torque value.
In principle, it is correct to perform all work in accordance with the torque value.
The work shown in the video...
I'm not telling you how to maintain it.
The purpose is simply to show the work process and to record it.
It could be something like, “You can do it this way,” but...
I'm not saying, "Do it like this."
I don't know if the work of the mechanic in the video is possible because he has a lot of experience and work skills, but
In general, this may not be a good method for unskilled people to follow.
therefore ...
I think you can just look at it for fun and think, "Ah, there are people who work that way..."
6만키로인데 벨트이빨하나도 안뭉개지고 금만조금 갓다구요?
버거가방달린거보니 배달용인데?
혼다기술이. 좋은건가 ㄷㄷ 무브볼은 거의깍두기가 다됏는데 쇠보다 고무벨트가 더튼튼하네 ㄷㄷ
그러게요..역대급입니다.
오토바이 주인분의 이야기로는
처음으로 교체를 하는것이라고 랍니다.
6만 키로를 운행것은 처음봅니다.
Me está dando fallo motor mi honda vision 110 2021 de que puede ser? Le cambie hace 2 días la bujia, aceite motor y la válvula de la caja de transmisión? Ayudame maestro
¿Has revisado también el filtro de aire?
@@MotorcycleRepair ya se quitó la luz por si sola, podria ser de el sensor de oxigeno (sonda Landa)? Es lo que se me ocurre
@@JesusAguilar-gw2oi El problema con el motor que no arranca es...
Comprobar suministro eléctrico del generador.
Problema con la bobina de encendido...mal contacto o cable defectuoso
Problema con la bujía...
Problema en el rectificador del regulador..
Problema con el filtro de aire..
Compruebe si la batería +/- está bien apretada.
Conectado al chasis de la motocicleta - Asegúrese de que el negativo a tierra esté bien apretado.
En la mayoría de los casos, puedes descubrir el problema comprobando esto.
Desafortunadamente, esto no es algo que pueda comprobar directamente...
No bastaría con hacértelo saber en este comentario.
Utilice esto sólo como referencia.
Новый ремень работает плохо. Это нормально? 😮
Да, говорят, что все в порядке.
Lets red line a cold engine.
Thank you for watching the video. 😊
@@MotorcycleRepair do you have any videos of how to fix Honda vision 110 fuel pump please many thanks
@@dadirosharif123 I don't have any videos on how to repair a Honda Vision 110 fuel pump.
인도네시아 혼다 부품 쓰시는군요
손님이 특별히 요구하지 않으면,
대부분의 부품은 부품 공급처에 주문을 하면,
공급처에서 주는 것을 그대로 사용합니다.😄
바이크주인할배 디질라고 작정을 했네 상태봐라 진짜 ㅋ
영상을 시청해 주셔서 감사합니다.
? 알고 씨부리거라. 아가야. 무브볼 깨져서 덜덜거리고 벨트 끊어져서 서야 교환하는 사람 부지기수다.
차도 그런 거지들 수두룩하다. 길에 서있는 차들 다 벨트 끊어진거란다. 아가야.
저정도면 아주 양호한거란다.
우연히 영상하나 접햇는데 이거보니까 이것도 6만갈수도 있겠구나 싶네요 차종은 uhr이긴하지만요
ua-cam.com/video/o8q46UXTwAw/v-deo.htmlsi=Yc-Ve2sfKBA-wRBN
😊
나도 6만에 갈거임 ㅋㅋ
헉..아니됩니다.
3만정도 운행하였다면 점검받고 교체를 하세요
5만에 가세요
그냥 갈지 말고 평생 타세요