@@ANModelTrucks I doubt that soldering paste is any better then acid core solder. You might want to look at a safety data sheet (SDS) for the product you are using. This is part of the warning from Fluxite. Others are similar. Your choice, of course. "P260 Do not breathe dust/fume/gas/mist/vapours/spray P261 Avoid breathing dust/fumes/gas/mist/vapours/spray P264 Wash hands thoroughly after handling P270 Do not eat, drink or smoke when using this product P271 Use only outdoors or in well-ventilated areas P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/face protection P301 + P330 + P312 + P331 - IF SWALLOWED: Rinse mouth. Call a POISON CENTRE/doctor "
@@jdwht2455 If I knew that before, it definitely be subject to think. Unfortunately there were no any precautions on a jar with that paste. By the way I use extractor fun on my workbench, so I don't breathe a lot of vapors. I hope :-) Anyway, I think it's time to try acid.
@@ANModelTrucks ....or, electronic, flux core solder. Lots less fuming with the product manufacturing process determining how much flux is being used. It still may show some respiratory distress in some people. This is my regular "fall back" solder for virtually any project with acid core seldom used for anything. Good luck! ;-}
It always seems like in videos from Russia and Eastern Europe the tools they use are all old and beat up. That soldering iron looks like it’s from the 1960’s. Lol. Regardless though they end up with amazing results. I guess it goes to say, it’s not the tools but the craftsman that uses them.
Awesome that you started a how to channel for your products.
I would use either acid or flux core solder tho your method is just fine. I would also clean to shiny first
I don't use acid because I don't want to breathe vapours of it. I already have enough vapours from different resins in our workshop.
@@ANModelTrucks I doubt that soldering paste is any better then acid core solder. You might want to look at a safety data sheet (SDS) for the product you are using. This is part of the warning from Fluxite. Others are similar. Your choice, of course.
"P260 Do not breathe dust/fume/gas/mist/vapours/spray
P261 Avoid breathing dust/fumes/gas/mist/vapours/spray
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P271 Use only outdoors or in well-ventilated areas
P273 Avoid release to the environment
P280 Wear protective gloves/protective clothing/eye protection/face
protection
P301 + P330 + P312 + P331 - IF SWALLOWED: Rinse mouth. Call a POISON CENTRE/doctor "
@@jdwht2455 If I knew that before, it definitely be subject to think. Unfortunately there were no any precautions on a jar with that paste. By the way I use extractor fun on my workbench, so I don't breathe a lot of vapors. I hope :-) Anyway, I think it's time to try acid.
@@ANModelTrucks ....or, electronic, flux core solder. Lots less fuming with the product manufacturing process determining how much flux is being used. It still may show some respiratory distress in some people. This is my regular "fall back" solder for virtually any project with acid core seldom used for anything. Good luck! ;-}
It always seems like in videos from Russia and Eastern Europe the tools they use are all old and beat up. That soldering iron looks like it’s from the 1960’s. Lol. Regardless though they end up with amazing results. I guess it goes to say, it’s not the tools but the craftsman that uses them.
Soldering iron from 90-s :-)
By the way - if something works, why to change it and spend money on new tools if they do same things?