Custom Dynamics Tourpack LED Light Install
Вставка
- Опубліковано 15 вер 2024
- Custom Dynamics Tourpack Led Light install. #customdynamics #cvostreetglide #harleydavidson
Mods:
-9” Klock Werks Black Sport
-Fused Lo Handlebar (gloss black)
-Signature Series Front Turn Signals and Saddlebag Lights
-Tourpack w/ ultra brace and light from Custom Dynamics
Screamin Eagle M8 Stage 2 torque kit
-Screamin Eagle Pro High Volume Oil Pump & Cam Support Plate
-Rinehart Racing Slimline Duals w/ DBX45 slip-on mufflers
-Dynojet Powervision
Music:
-Epidemic Sound
Best installation ive seen yet. So clean and protected. Well done.
I appreciate that. Thanks for watching..✌🏾
More light is always a great idea ! Cool ! Very cool! Just came across your channel, I'm happy to support you and other motovloggers. Keep up the great work and ride safe out there,
💯💯👍👍
Absolutely!!! Thx for watching!!! ✌🏾
Thanks for your video. I had most of my pins out except one. Got frustrated and put it back together. Seen your video and you made it so much easier the way you did it. Thank you 🙏🏾.
Glad the video helped… ✌🏾
Nice !!
Used your video today! Much cleaner install than directions from CD. Thank you!
I’m glad you found it useful… Thanks for watching…✌🏾
Great idea to hide wires . 👍🏽
Great video. Thanks for the idea. Will be doin the same.
Well done man. Appreciate it!
Thanks, I appreciate you taking the time to watch… ✌🏾
That’s dope! I’m thinking adding more lights
Definitely helps lighting up the rear ✌🏾
Why didn't you just put the hole for the wiring right behind the light instead of all that wire ran outside thew tour pack?
Excellent installation. Would have been helpful for us beginners if you provided slow step by step in how you took the tip off. Otherwise, great installation video.
Nice job and looks good
Thx… I appreciate that…✌🏾
Looks good! Nice and clean too! Did that liner come with the tour pack or did you order it separately?
Dope!
Thanks, I appreciate it ✌🏾
I was wondering when you was going to add more lights
Nice install. Just wondering, if you were drilling into the back, why didn’t you just drill the hole behind the light? Would still be in the tour pack with no wire showing
Hey what’s up. The design of the back of the light bar is made to go against the indentation of the tourpack so the wire coming from it comes out the top center which prevents me from tucking it back down. Also there was a strip of 3M tape along the entire back side and cutting into it may damage wiring behind it. But thanks for watching and taking the time to comment… ✌🏾
@@Teddy_B_Ridn thank you
Nice work. How do you get the brake lights to pulsate like that?
Thanks! I’m using the magic strobe from Custom Dynamics. I believe it has like 9 different patterns to choose from. Thanks for watching… 👊🏾✌🏾
Did the wire show where it exits the light and goes behind the backrest? Or does the backrest cover it up fairly well?
Hey what’s up. The wire on my particular unit exits the light housing at the top so I had to run the wire behind the top of the backrest pad. The pad does hide the wire fairly well. Only about 5/8” of wire on top showing between the two. Hope that helps and thanks for watching! ✌🏾
Did not show the fundamental process to de-pin the connector. I got stuck at trying the de-pin process. I couldn't get the connector de-pined. I was about to break the connector. Good Luck if you try this..!
Do you have the magic strobe or the triple play Run Turn Brake from custom dynamics? I currently have the RTB and want to add the tour pack light. Just don’t know if I can hook it up to the RTB or if I have to buy the magic strobe kit. Great install!
Hey what’s up. Yes I have the magic strobe installed as well. Thanks for watching ✌🏾
@@Teddy_B_Ridn
If I already have the triple play do I need to get the magic strobe? I’m going to reach out to them on Monday. Thanks man.
@@pennhahn I’m not too familiar with the triple play, that was the first version maybe?
@@Teddy_B_Ridn
Not sure man. I’ll check on Monday. Appreciate your time.
Why didn’t you drill a hole behind the light plate, this way you don’t see the wiring from above.
Hey what’s up… The reason why I couldn’t drill a hole behind the light and into the tour pack is because the back of the light is designed to sit flush against the indentation on top of the tour pack. The design of the light has a notch on top where the wire comes out giving the only option/direction for the wire to travel. Thanks for watching… ✌🏾
Nice bike, where did you get the pad for your tour pack?
Hey what’s up.. I got it off of Amazon “TCMT” I believe is the brand…
I did this but was not about to get my lights to work. Is there a certain way to put the wires back in. If so can you let me know.
Did you use the de-pining method and if so did you take a pic of the wiring order?
What size grommets? I may just cut my wire inside the tourpack and splice with solderless it’s connectors
Hey what’s up, not sure about the size grommets I used. I had a few size’s around from a previous project but I would suggest when u get them, make sure the inside diameter is what u look for. Hope that helps… ✌🏾
Of all things I wish you show how you deping the plug in regular time that's the part I need to see
Hey what’s up… I learned how to do this about 7yrs ago when I was installing handlebars on my first harley. I’ve attached the link below. Just skip to the 16min mark if u don’t want to watch the whole video. I know it’s an old video but the principals are the same. Thx for watching…✌🏾
ua-cam.com/video/sPvOmEvXQRs/v-deo.html
@@Teddy_B_Ridn cool thank I appreciate it and plus be looking for your new videos I already subscribed
Be safe in dem streets
@@gnastybrownbrown1571 💯
What size hole did you drill? What is the size of the grommets?
Hey what’s up! I don’t remember what size hole I drilled but I will say this, when u get ur pack or grommets, drill ur hole according to the size marked “OD” (outside diameter) and not the “ID” (inside diameter). They’ll go in much easier. Hope that helps! 👊🏾✌🏾
I wonder if this fits on the razor tour pack from advanced black
Hey what’s up. I’d say that there’s a good chance that it would fit because on my 2014 Street Glide, I had a razor from Advan Black and I ran the same light but from Kuryakyn and it looked great. They’re pretty much made the same way. Hope that helps… ✌🏾
Great video! I’m going to mod mine now. What size grommet did you use?
Hey what’s up.. The grommets I used for the install were 7/16OD x 3/16ID… Thanks for watching… ✌🏾
@@Teddy_B_Ridn got it. Going to cop them now. Your idea is simple but genius. Thanks for sharing.
Is there a video I can watch to show how to disassemble and reassemble that connector?
Hey what’s up… I learned how to do this about 7yrs ago when I was installing handlebars on my first harley. I’ve attached the link below. Just skip to the 16min mark if u don’t want to watch the whole video. I know it’s an old video but the principals are the same. Thx for watching…✌🏾
ua-cam.com/video/sPvOmEvXQRs/v-deo.html
What size grommet did you use?
Hey what’s up. I don’t remember the exact size I used because they were part of a verity pack. However when picking the right size to use, use the inside diameter of the grommet for correct sizing and not the outside. On the package it should say something like “OD” for outside diameter and “ID” for inside diameter. Hope this helps. Thanks for watching… 👊🏾✌🏾
Good evening what size and type of drill bit did you use?
Hey what’s up. I used a small step drill bit and went deep enough for the grommet to fit.
@@Teddy_B_Ridn appreciate it, will be doing the same very soon
What size drill bit did you use to make your holes and what size grommets
Nice job
Hey what’s up. I believe I started with 1/4” and then went up depending on the inside diameter of the grommet. When getting ur grommets from the store, pay attention to the INSIDE diameter not the outside because that’s where the wire will pass through. Hope that helps… ✌🏾
Thanks for your help 👍🏾
I’ve been searching high and low to find a 3 3rd brake light for my 09, will this work for my year bike?
Hey what’s up… I’m not sure if the particular light I used is year specific but I would suggest checking out they’re website… Thanks for watching ✌🏾