I've been following your tutorial for the past month or so, slowly mapping each one of the DRASTIC parameters... and I just wanna give you a big thank you for being part of the reason I managed to finish my Bachelor thesis. I've come back to this video a bunch of times when I got stuck on something. Cheers from Greece :)
Thank you for the video, it was very helpful. I have a question: how did you define the new values for the rating column? Cause I am trying to make an irrigation water quality parameters map from groundwater chemistry results. I appreciate it in advance.
Hi, If I am not mistaken regarding what you asked, there are standard guidelines for rating, you need to inspect some articles for that. to be more specific you may mention video time, so that I could get correct reference.
Your explanation was always great. I follow you on all my accounts I have an important question here I think DEM must be converted from WGS84 (Degree) system to UTM (Meter) before you can create an slope map I didn't see you did that
Thank you for your concern. As far as I'm concerned my all other features were in the same coordinate system (WGS 1984), so i think i don't have to convert it.
It is not about the return system of all classes as you know that the slope depends on the value of Z This value may not be recognized by the program (Z=°??) I salute you for your valuable efforts
Maybe I didn't know how to ask my question well I mean that the slope map needs the value of the height (altitude) , which is recognized by the program from the factor Z, so the system must be metric
Hello! Thank you for this video. You have helped me a lot. However, could you please share paper references with me? i am currently working on an aquifer system in Haiti. I thank you from Haiti
Thank you for nice elaboration step by step. Can u please help me how to extract the aquifer media data, vadose zone data and hydraulic conductivity data for Orissa State, India? Actually I am working in this area. Please, kindly mention the sources also for these data with your kind cooperation
Dear @@souvickshaw5996 , I am from Bangladesh, so I can tell you about data availability in my country but I don't know nothing about your study place. I saw a lot of such work from India, so you can reach out to some of the indian authors or find out in their articles how they collected data.
Hello mate, thanks for your usefull video, I would like to ask ypu please we have to make that for all parameter, then reclassify and later make the vulnerability map?
Hey can you please provide me the datasets of impact of vadose zone, soil media, aquifer media and hydraulic conductivity?? From where did you get the lat long, well depth and other chemical concentration datasets???
I think that's one of the easiest one, unless you are working on e very remote area. try your best you will find. maybe can look at national water resource management website.
I've uploaded a video on model validation as far as i can recall. If that doesn't satisfy you then check out some articles and try on your own. u can do it.
hello where did u get the information on well-depth, lat, long etc? I tried googling drilling depth but I can't find any database. My study area is in china, hope u can help! (':
great sir. i have have a problem could you please help me out? i want to creating overlying materials. i have lithology data and i use kirging to interplate but after that how should i do next? ( according GOD methods)
As far as I'm concerned, GOD is simpler than DRASTIC. After kirging give each layer ratings by reclassification as i showed in the video, then use field calculator to multiply rated layers.
Assalamu alaikum vaiya I am not being able to find out the groundwater data of Bangladesh from BGS website. Can you please help me out? Or provide information about some other websites where I can access the data for free. It will be great help for me.
do you mean, how to add data in arcmp, If I understood u correctly, I have shown required steps to connect excel files, like converting xlsx files to workbook or CSV format...such things.
I've been following your tutorial for the past month or so, slowly mapping each one of the DRASTIC parameters... and I just wanna give you a big thank you for being part of the reason I managed to finish my Bachelor thesis. I've come back to this video a bunch of times when I got stuck on something. Cheers from Greece :)
Glad to hear that , cheerss
I was stuck on spatial analysis using DRASTIC method. You are a resourceful tutor. Much love from Kenya. Thank you so much
Glad to hear that. It really means a lot.
Thank you.
you sir, is a life saviour. i owe you my career likely
Glad that it helped you out.
kindly make a video on validation,sensivity analysis,kappa statistics and ROC. thanks
Thank you so much for your video! It has been a guide for me...
Thank you for informative video.. How to design Nitrate vulernability map using landuse map?
wow, i have been waiting for it for a long timeeee................thanks
Thank you for the video, it was very helpful. I have a question: how did you define the new values for the rating column? Cause I am trying to make an irrigation water quality parameters map from groundwater chemistry results.
I appreciate it in advance.
Hi, If I am not mistaken regarding what you asked, there are standard guidelines for rating, you need to inspect some articles for that. to be more specific you may mention video time, so that I could get correct reference.
Your explanation was always great. I follow you on all my accounts
I have an important question here
I think DEM must be converted from WGS84 (Degree) system to UTM (Meter) before you can create an slope map
I didn't see you did that
Thank you for your concern. As far as I'm concerned my all other features were in the same coordinate system (WGS 1984), so i think i don't have to convert it.
It is not about the return system of all classes as you know that the slope depends on the value of Z
This value may not be recognized by the program (Z=°??)
I salute you for your valuable efforts
@@azzeddinereghais7494 that Z factor was inactive moreover, frankly speaking i'm not aware of that parameter'😊
Maybe I didn't know how to ask my question well
I mean that the slope map needs the value of the height (altitude) , which is recognized by the program from the factor Z, so the system must be metric
Please dr.we need a video how to make geomorphology map with argis. Thanks
Hello!
Thank you for this video. You have helped me a lot.
However, could you please share paper references with me? i am currently working on an aquifer system in Haiti. I thank you from Haiti
You can find the reference paper in the description box.
Thank you.
Thank you for nice elaboration step by step. Can u please help me how to extract the aquifer media data, vadose zone data and hydraulic conductivity data for Orissa State, India? Actually I am working in this area. Please, kindly mention the sources also for these data with your kind cooperation
Hi, Good afternoon. Please kindly give me some solution regarding that issue I have posted a week ago. I will be waiting for your valuable reply.
Dear @@souvickshaw5996 , I am from Bangladesh, so I can tell you about data availability in my country but I don't know nothing about your study place. I saw a lot of such work from India, so you can reach out to some of the indian authors or find out in their articles how they collected data.
Helps me a lot....
Hello mate, thanks for your usefull video, I would like to ask ypu please we have to make that for all parameter, then reclassify and later make the vulnerability map?
Yep, u r absolutely right
@@DataAnalyticsm do you have the video for the rest of the parameter?
@@DataAnalyticsm thanks a lot, do you have the video for the rest of the parameter?
R u guys stuck for the all parameters ?
@@DataAnalyticsm not actually, but I would like to know the rest as well
Hey can you please provide me the datasets of impact of vadose zone, soil media, aquifer media and hydraulic conductivity?? From where did you get the lat long, well depth and other chemical concentration datasets???
check out ur mail
Can I have the dataset please
very impressive dear
Hmmm....look who showed upp
Very good job..go ahead friend ❤️
Thaaank u 😁🥰
where can I get depth to the water table? It's so difficult to find this variable is the only one that I am missing.
I think that's one of the easiest one, unless you are working on e very remote area. try your best you will find. maybe can look at national water resource management website.
Can I get impact of vadose zone data please..
great work bro, I have one problem can you please help me out,? I have aquifer media in table form how can I interpolate it?
Table form like what ?? Can I see a screenshot ?
@@DataAnalyticsm how i can show you my table? is there any email id you have plz share it
@@muhammadumarakbar8946 mahbub.env.ju@gmail.com
Good work
Thanks
how to get the excel file for any district?
WHAT ABOUT VALIDATION IF ON EPIK METHODS, PLEASE HELP ME,. PLEASE GIVE ME A TUTORIAL OF A WORKING STEPS FROM THE BEGINNING...TANKS
I've uploaded a video on model validation as far as i can recall. If that doesn't satisfy you then check out some articles and try on your own. u can do it.
hello where did u get the information on well-depth, lat, long etc? I tried googling drilling depth but I can't find any database. My study area is in china, hope u can help! (':
I found that data in british geological survey website
Search like "geological survey in ur study area name " may find some reports
@@DataAnalyticsm Can you make a video for us on how to download data from a british geological survey website?
@@azzeddinereghais7494 I've put the Link in the description box
great sir. i have have a problem could you please help me out? i want to creating overlying materials. i have lithology data and i use kirging to interplate but after that how should i do next? ( according GOD methods)
As far as I'm concerned, GOD is simpler than DRASTIC. After kirging give each layer ratings by reclassification as i showed in the video, then use field calculator to multiply rated layers.
@@DataAnalyticsm great sir. thank you
how to get excel file regarding DRASTIC parameters any one place
Assalamu alaikum vaiya
I am not being able to find out the groundwater data of Bangladesh from BGS website. Can you please help me out? Or provide information about some other websites where I can access the data for free.
It will be great help for me.
leave ur mail , i shall send u what i have
Check ur mail, sorry for my late response
Sir, can I have the dataset please?
Pls Help me to find saltwater intrusion
How to get net recharge?
How the data are connected to the arc map
do you mean, how to add data in arcmp,
If I understood u correctly, I have shown required steps to connect excel files, like converting xlsx files to workbook or CSV format...such things.
You forgot to explain R-factor (Net Recharge).
Hi, Any reference paper on this?
u can leave ur mail address here or send a mail to me, i shall try to add some reference papers
please also can you share the Faridpur data with me?
@@najibarashid6475 mahbub.env.ju@gmail.com ; my mail address.
Can I have the dataset please, the excel file.
i've provided the website link in the description box
where u can get lat, long, well depth data
Sir, your mail id?
Hey, don't call me sir
Anyway it's mahbub.env.ju@gmail.com